Labor to install vinyl skirting typically costs $3-$7 per linear foot, or about $500-$1,700 for a standard mobile home perimeter. The final quote depends on perimeter length, ground conditions, access, removal of old skirting, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Labor only | $3 per linear ft | $5 per linear ft | $7 per linear ft | Basic installation, clear access |
| Labor for 180 linear ft | $540 | $900 | $1,260 | Standard single-wide perimeter |
| Labor for 240 linear ft | $720 | $1,200 | $1,680 | Larger or double-wide perimeter |
| Labor and materials | $8 per linear ft | $12 per linear ft | $18 per linear ft | Basic-to-upgraded vinyl systems |
What installers charge for vinyl skirting labor
For straightforward installation, contractors commonly charge $3-$7 per linear foot for labor. A 180-foot perimeter therefore costs around $540-$1,260 in labor, with roughly $900 as a useful budgeting midpoint. Rates usually assume standard vinyl panels, an accessible perimeter, and no major framing or grading work.
Labor-only pricing is not the same as the complete skirting price. Vinyl panels, top and bottom tracks, fasteners, vents, and access doors can add about $5-$11 per linear foot, depending on product quality and local supply costs. Assumptions: U.S. suburban market, standard vinyl, normal access, and no old-skirt removal.
How panels, track, and site work appear in a quote
A written estimate should separate installation labor from materials and extra work. This makes it easier to compare bids and identify whether panel cutting, corner details, and cleanup are included.
| Quote item | Typical price | What it covers | Pricing basis |
|---|---|---|---|
| Panel and track installation | $3-$7 | Cutting and fitting standard panels | Per linear ft, labor |
| Vinyl panels and tracks | $5-$11 | Basic to heavier-gauge materials | Per linear ft, materials |
| Door or vent fitting | $40-$120 | Cutout and fitting per opening | Per fixture, labor |
| Old skirting removal | $1-$3 | Removal and basic disposal handling | Per linear ft |
| Ground or frame correction | $50-$100 | Minor leveling or support adjustments | Per hour, labor |
Confirm whether disposal, vents, and access doors are priced separately. Some contractors also apply a minimum charge, often $300-$600, for small jobs that require travel and setup.
Perimeter length and ground clearance change labor
Perimeter length is the clearest cost driver: each additional 10 linear feet adds about $30-$70 in basic installation labor. A single-wide home with 160-200 feet of perimeter generally takes less labor than a double-wide with 220-280 feet, especially when the latter has more corners and cutouts.
Skirting height and uneven terrain matter too. A clearance of 18-24 inches is usually simpler to cover than a 36-inch or taller exposed foundation. Slopes, soft soil, rocks, and a frame that needs repair can add $100-$600 or more in preparation labor.
Measure the full perimeter and note height changes before requesting quotes. Openings for plumbing, electrical access, vents, and doors also require careful cuts; several openings can add $100-$400 in labor depending on quantity and complexity.
How long a two-person crew may need
A two-person crew may install basic skirting around a simple 160-200-foot perimeter in about 6-10 hours. A 220-280-foot perimeter, multiple openings, or uneven ground can extend the job to 1-2 workdays. These time estimates assume the area is clear and materials are on site.
Ask whether the bid is per foot or time-and-materials. Hourly labor commonly runs $50-$100 per worker, or about $100-$200 per hour for a two-person crew. A fixed per-foot quote can make the total more predictable when the perimeter and scope are measured clearly.
Regional labor rates from rural areas to major metros
Labor rates vary by market rather than following one national price. Rural locations may come in 10%-20% below the typical range when contractors are nearby and competition is available. Large metro areas and high-cost coastal markets can run 15%-35% higher than a Midwestern baseline.
Travel distance can reduce the value of a low per-foot quote: a contractor may add a $75-$250 trip or mobilization fee for remote properties. Compare the final installed labor total, not just the advertised rate per foot. Ask whether taxes, travel, and disposal charges are included.
When removal, leveling, or custom cuts add fees
Replacing existing skirting costs more when removal, hauling, or frame repairs are required. Removal and handling commonly add $1-$3 per linear foot, while a badly bent bottom track or damaged support framing may add $200-$800 depending on repair scope. Disposal may be charged separately when debris volume or local landfill fees are high.
Custom cuts around steps, decks, utility lines, and sloped sections can add $50-$300 or more. Have the installer list each site complication as a separate line item. This helps distinguish necessary preparation from optional work and avoids surprises after the panels are removed.
Ways to trim installation labor without cutting corners
Clear plants, stored items, and debris away from the home before the crew arrives. Confirm that the work area is accessible and that measurements, panel color, vent locations, and access-door placement are settled. This can prevent paid delays and repeated cutting or material runs.
Get at least three itemized bids using the same perimeter measurement and scope. If existing tracks are straight, secure, and compatible with the new panels, ask whether they can remain; reuse may reduce labor, but damaged or mismatched tracks can lead to poor fit. Save money by limiting extras and preparation delays, not by skipping needed drainage, ventilation, or structural repairs.