A new Land Pride aerator typically costs about $3,000-$6,500, with many standard three-point models near $4,700 before delivery and tax. Price depends mainly on working width, tractor compatibility, tine configuration, dealer pricing, and whether the unit is new or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Land Pride aerator | $3,000 | $4,700 | $6,500 | Typical implement price; model and dealer vary |
| Used Land Pride aerator | $1,200 | $2,600 | $4,000 | Condition, age, and tine wear affect value |
| Delivery and setup | $150 | $350 | $800 | Depends on distance and dealer service |
| Replacement tines | $10 | $20 | $35 | Approximate per tine, depending on style |
What a new Land Pride aerator costs by size
For a new Land Pride core aerator, budget approximately $3,000-$6,500 for the implement alone. A narrower, basic configuration may land near the low end, while wider models, heavier construction, and specialized tine arrangements tend toward the upper end. Dealer inventory and regional freight can shift a quote.
These estimates assume a standard three-point implement, ordinary dealer preparation, and no tractor purchase or major site work. Land Pride model availability and specifications can change, so the exact model number, working width, hitch category, and required tractor capacity should be confirmed on the written quote.
Assumptions: U.S. dealer pricing, standard equipment, normal access, and no sales tax included.
How frame, tines, freight, and labor shape the quote
The implement is usually the largest line item. A quote may also include dealer setup, freight, replacement parts, and tax. Ask whether quoted pricing includes delivery to the property or only pickup at the dealership.
| Quote item | Typical price | What changes the amount |
|---|---|---|
| Aerator implement | $3,000-$6,500 | Model, width, frame, and tine setup |
| Dealer preparation | $75-$250 | Assembly, inspection, and adjustments |
| Delivery | $150-$800 | Distance, access, and transport requirements |
| Replacement tines | $10-$35 per tine | Tine type and quantity needed |
| Sales tax | Approximately 0%-10% | State and local tax rules |
Compare the out-the-door total, not just the implement’s advertised price. Freight, setup, and tax can add several hundred dollars, while optional parts or a warranty extension may increase the final bill further.
Why working width and tractor capacity change the price
Working width is a central price driver: a wider aerator covers more ground per pass but generally costs more and needs a tractor with adequate lift capacity and horsepower. For example, moving from a roughly 60-inch implement to a roughly 84-inch configuration can add several hundred dollars or more, depending on the model and equipment package.
Tine design and soil conditions also matter. Hollow-core tines remove plugs and may need replacement more often in rocky soil; solid tines make holes without extracting plugs. Hard, dry ground can reduce penetration, while a heavier machine or added ballast may improve performance if the tractor’s limits allow it. Confirm tine spacing and recommended operating weight rather than assuming two similar-width models will perform alike.
Tractor compatibility is a cost issue as well as a safety issue: verify hitch category, lift capacity, and the manufacturer’s minimum power recommendation before buying.
How much delivery, setup, and field work add
Most of the purchase price is for the implement, but dealer preparation and transport affect the amount paid at delivery. A short local drop-off may cost $150-$350; a longer haul, difficult access, or special transport can raise the charge toward $800. Dealer setup is often modest, but the quote should clarify what inspection or assembly is included.
Operating labor is usually handled by the tractor owner rather than billed as installation. If a landscaping contractor supplies the tractor and operator, a broad planning range is $75-$150 per hour, with travel or minimum-service charges possible. A 3-hour job at $100 per hour would add $300 for labor, separate from the aerator purchase.
Used Land Pride models versus new dealer inventory
Used Land Pride aerators commonly list around $1,200-$4,000, with the lowest prices often tied to older units, worn tines, or limited documentation. A clean, lightly used implement with serviceable tines and a compatible hitch may cost $2,000-$3,500. These are planning ranges, not guaranteed resale values; local supply can be limited.
Before paying, inspect the frame for cracks or bent sections, check the hitch and bearings, and look for uneven tine wear. Price any missing parts and transport before comparing against a new dealer quote. A used unit that needs a full tine replacement can lose much of its apparent savings.
Regional freight and dealer rates across the U.S.
Equipment pricing can vary by dealer inventory, competition, and shipping distance. As a rough comparison, a nearby rural dealer with stock may quote a price near the baseline, while a remote delivery or a dealer arranging freight may add 5%-15%. High-demand areas or limited local inventory can also produce quotes 5%-10% above a comparable offer in a competitive market.
These percentages are budgeting guidance, not fixed regional price rules. Request quotes from at least two authorized dealers and compare the same model, options, preparation, and delivery terms. A lower advertised price may not be the cheaper purchase after freight and local taxes.
Ways to lower the Land Pride aerator price
Choose a working width that matches the tractor and acreage instead of paying for capacity that will rarely be used. Compare the base model with optional tine packages, and ask whether any included accessories are necessary for the intended soil and turf. Avoid adding ballast or equipment without checking the tractor and implement manuals.
Pickup can reduce delivery charges if the buyer has a suitable trailer and safe loading arrangements. For a used unit, negotiate based on documented tine wear and needed repairs rather than age alone. Get an itemized written quote covering model, options, setup, freight, tax, and warranty before comparing offers. For occasional use, renting an aerator or hiring a local operator may cost less than ownership, particularly when transport and storage would otherwise be additional expenses.