A new Land Pride post hole digger typically costs about $1,400-$4,000 before tax, with many standard-duty setups landing near $2,400. Model, tractor horsepower, auger bit size, dealer freight, and whether the package includes accessories drive the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New digger attachment | $1,400 | $2,400 | $4,000 | Frame and gearbox; bit may cost extra |
| Auger bit | $250 | $450 | $850 | Price varies by diameter and soil-duty rating |
| Dealer delivery | $0 | $150 | $400 | May be waived with pickup |
| Used attachment | $700 | $1,400 | $2,300 | Condition, model, and included bit affect value |
What a Land Pride post hole digger costs with a standard bit
For a new Land Pride three-point-hitch digger and one standard auger bit, budget roughly $1,700-$4,800 total before sales tax. A practical midrange estimate is $2,800-$3,200, assuming a standard-duty unit, one common 9- or 12-inch bit, and local pickup or modest delivery.
Higher-capacity models and larger or more specialized bits can push a package above that range. Dealer inventory and discounts change, so prices are often quoted rather than posted consistently. Ask whether the quote covers the gearbox, boom and frame, PTO driveline, bit, and any setup charge.
Assumptions: U.S. dealer pricing, new equipment, ordinary access, and no unusual freight or tax charges.
How gearbox, auger bit, freight, and labor shape the quote
The attachment price usually covers the main implement, but the bit and delivery may be separate. Most buyers can connect a compatible three-point unit themselves; dealer assembly, setup, or delivery adds cost when included. The ranges below are budgeting estimates, not a single nationwide dealer tariff.
| Quote item | Low | Average | High | What changes it |
|---|---|---|---|---|
| Digger frame and gearbox | $1,400 | $2,400 | $4,000 | Model, duty rating, dealer pricing |
| Standard auger bit | $250 | $450 | $850 | Diameter, length, and construction |
| Delivery or freight | $0 | $150 | $400 | Distance and dealer policy |
| Setup or installation | $0 | $100 | $250 | Pickup-ready versus dealer assembly |
| Sales tax | $0 | $180 | $400 | Tax rate and taxable charges |
Sales tax depends on the buyer’s location and taxable purchase amount. For optional setup labor, gives a useful estimate: one to two hours at $75-$125 per hour would add about $75-$250.
Tractor horsepower and 6- to 18-inch bits change model pricing
Match the digger to the tractor’s three-point hitch, PTO, and horsepower requirements before comparing prices. A lighter-duty setup may suit smaller tractors and ordinary fence-post work, while heavier-duty models are intended for greater loads and more demanding use. Confirm the specific Land Pride model’s current specifications with a dealer.
Bit diameter is a meaningful cost and workload threshold. A 6- to 9-inch bit generally costs less and requires less power than a 12-inch bit; 15- to 18-inch bits may need a more capable tractor and can cost substantially more. Rocky, compacted, or root-filled ground can also require tougher components or a different bit. Buying a larger model than the tractor can safely run can add expense without improving the job.
Check tractor lift capacity and hitch category as well as advertised horsepower. PTO driveline fit, tractor clearance, and whether the auger can reach the intended hole depth can affect compatibility and the final package cost.
Save money by matching the bit and model to the job
Price the job around the hole diameter, depth, and soil—not the biggest attachment available. For common fence posts, one correctly sized bit may be enough; buying multiple sizes only makes sense when planned work requires them. A compatible, adequately rated model and one task-matched bit usually avoid unnecessary upgrades.
Compare written dealer quotes with the same model, bit diameter, freight, setup, and warranty terms. Ask whether local pickup reduces delivery charges and whether the dealer has a current promotion. If the tractor and implement already fit, avoid paying for accessories or dealer services that are not needed.
Dealer prices vary with freight and local equipment demand
Regional price differences often come less from the implement itself than from freight, inventory, and dealer competition. Buyers in rural areas near a stocking dealer may pay less for delivery, while remote locations can face added transport charges. A reasonable planning allowance is 5%-15% above a comparable local quote when freight or limited availability applies.
Urban and suburban buyers may find more competing dealers but still pay delivery fees if transporting the attachment is difficult. Compare the full out-the-door amount, including tax and delivery, rather than treating a low advertised price as the final cost. Seasonal demand can also affect discounts and stock; ask for the quote’s expiration date.
Extra bits and soil conditions can add $250-$1,000
Additional auger bits commonly add about $250-$850 each, depending on diameter and duty level. A replacement cutting edge or point may cost less than a complete bit, while extension equipment and specialized options can increase the package price. Ask which wear parts are included and whether the quoted bit matches the intended soil.
Hard, rocky, or root-heavy ground can slow digging and accelerate wear. If a site has buried utilities, locate them before digging; required utility-marking services are often free, but repairs for striking an unmarked or improperly located line can be costly. Confirm the bit and site conditions before treating the attachment price as the whole project budget.
Used Land Pride diggers trade lower prices for condition risk
Used Land Pride post hole diggers often list around $700-$2,300, with age, gearbox condition, bent components, and included bits affecting the price. A low-cost unit may need a driveline, bearings, seals, or cutting parts; repairs can erase the savings. Inspect the gearbox for leaks or unusual play and check the frame, PTO shaft, and bit for damage.
Compare the used unit’s model and hitch fit with the tractor before paying. Request the model number and verify parts availability. A used attachment with a worn bit may need another $250-$850, so include replacement parts and transport when comparing it with a dealer’s new-equipment quote.