A Land Pride RTR1258 rotary tiller typically costs about $4,000-$6,000 new, with an estimated average near $4,900 before sales tax. Final pricing depends on dealer discounts, freight, setup, tractor compatibility, and whether the implement is new or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New RTR1258 | $4,000 | $4,900 | $6,000 | Implement price; dealer and freight charges vary |
| Used RTR1258 | $2,000 | $3,200 | $4,500 | Condition, age, and tine wear affect price |
| Freight and setup | $150 | $350 | $700 | May be included in a dealer quote |
| Estimated new total | $4,150 | $5,250 | $6,700 | Before sales tax and any tractor-side changes |
What a New 58-Inch RTR1258 Usually Costs
The RTR1258 is a rear-tine rotary tiller with a nominal 58-inch working width, intended for compatible compact tractors. A reasonable planning range is $4,000-$6,000 for the implement alone; local quotes can fall outside it due to dealer inventory, discounts, freight, and included accessories. The average estimate of $4,900 assumes a standard new unit and ordinary dealer pricing, not a bundled tractor purchase.
Budget roughly $4,150-$6,700 delivered and set up before tax. The tiller’s usable width is not the only fit check: tractor horsepower, hitch category, PTO, and hydraulic requirements should be confirmed against the current product specifications and the tractor manual.
Assumptions: U.S. dealer sale, standard configuration, normal delivery distance, and no tractor modifications.
How Dealer Quotes Divide Tiller, Freight, and Setup
A quote may show only the implement price, or combine delivery and assembly into a single equipment charge. Ask the dealer to separate these items so a low advertised price can be compared fairly with a delivered quote.
| Quote item | Typical range | How it is charged | What to confirm |
|---|---|---|---|
| RTR1258 implement | $4,000-$6,000 | Per unit | New condition and included configuration |
| Freight or delivery | $100-$500 | Per delivery | Distance, unloading, and destination |
| Dealer setup | $50-$200 | Per unit | Assembly, inspection, and adjustment |
| Sales tax | About 0%-10%+ | By local rules | Taxable equipment and delivery charges |
| Optional accessories | $100-$600 | Per item | Whether needed for the tractor or soil |
Freight, tax, and accessories can push the final check well above the implement-only figure. Some dealers waive or reduce delivery on nearby orders, while others include setup in the listed price. Confirm whether a quote includes any required PTO shaft or other specified equipment rather than assuming it is included.
Tractor Horsepower and Soil Conditions Change the Quote
Price differences between dealers often reflect package details, but operating conditions affect the total project budget too. Confirm that the tractor’s power and hitch setup match the tiller before purchase; an undersized tractor may struggle in hard ground, while a larger tractor may need a different implement. The 58-inch width also needs to suit the tractor’s tire track and the area being tilled.
Dense clay, rocky ground, and sod can increase tine wear and maintenance compared with previously cultivated soil. If a field has stones or heavy roots, ask about suitable operating practices and the cost of replacement tines before buying. PTO shaft fit, hitch category, and required PTO speed should be checked in the manufacturer’s current specifications.
Compatibility and soil condition are more useful quote checks than width alone. Any tractor changes, such as adding ballast or adjusting hitch equipment, are separate expenses and vary substantially by machine.
Used RTR1258 Prices Depend on Tines and Gearbox
Used listings commonly fall around $2,000-$4,500, with an estimated midpoint near $3,200. Units near the low end may have worn tines, cosmetic damage, missing components, or limited service history; clean, lightly used examples with documented maintenance can approach the high end.
Inspect tine wear, gearbox leaks, driveline guards, PTO shaft condition, side panels, and the hitch before paying. A mechanic’s inspection or repair allowance may be worthwhile if the tiller has been stored outdoors or used in rocky soil. A lower purchase price does not necessarily mean a lower ready-to-work cost.
Compare the used price plus likely repairs against a delivered new quote. A unit priced at $2,800 may be less economical if it needs several hundred dollars in parts or has uncertain gearbox condition.
Regional Delivery and Dealer Pricing Across the U.S.
Dealer pricing varies with competition, inventory, freight distance, and seasonal demand. As a planning estimate, rural buyers far from a stocking dealer may see delivered totals about 5%-15% above a nearby in-stock quote. Competitive markets or dealer promotions may produce prices around 3%-10% below a typical local quote, though discounts are not guaranteed.
These are comparison ranges, not fixed regional averages. Request the same configuration and delivery terms from two or three dealers, including any charge for unloading. A low price from a distant dealer may lose its advantage once freight is added.
Compare delivered, pre-tax totals rather than advertised implement prices. Tax treatment and dealer fees depend on the buyer’s location and the terms of sale.
Delivery, Assembly, and First-Use Expenses
Delivery may cost $100-$500 for a local or regional drop-off, while longer routes can exceed that range. Basic dealer setup may add $50-$200 if not included. A buyer picking up the tiller needs a suitable trailer, securement, and a vehicle rated for the combined load; rental or hauling charges vary by distance and equipment.
Routine first-use costs are generally limited to compatible tractor setup and checking the driveline, guards, lubrication, and fasteners according to the manuals. Labor for tractor service or modifications is not part of the tiller price. When billed separately, agricultural equipment service labor may run roughly $90-$150 per hour, with travel or minimum charges possible.
For example, two hours of dealer labor at $90-$150 per hour adds $180-$300. Get approval for any work beyond the quoted assembly before service begins.
Which Price Cuts Make Sense on a 58-Inch Tiller
Ask whether the dealer has an in-stock unit, a seasonal discount, or a delivery route that reduces freight. Comparing equivalent new quotes is more reliable than choosing the lowest headline price. If buying used, base the offer on tine condition, service records, and verified compatibility rather than age alone.
Avoid paying for accessories that are not required by the tractor or the intended work, but do not omit safety equipment or specified driveline parts. For occasional light-duty use, compare the cost of hiring a tiller service or renting compatible equipment with ownership, including transport and maintenance. Rental availability and rates vary locally.
The most controllable savings usually come from freight, quote comparison, and avoiding unnecessary add-ons. Keep a repair reserve for used equipment, and confirm all included items in writing before payment.