A new Land Pride wood chipper typically costs about $4,000-$10,000 before tax, with many buyers budgeting around $6,500-$7,000 for the machine. Price depends mainly on chipper capacity, dealer pricing, tractor compatibility, delivery, and whether the unit is new or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Land Pride chipper | $4,000 | $6,500 | $10,000 | Estimated equipment price by capacity and dealer |
| Used chipper | $2,000 | $4,500 | $7,500 | Condition, age, and model affect value |
| Delivery and setup | $100 | $350 | $800 | Distance and dealer preparation vary |
| Typical new purchase total | $4,300 | $7,100 | $11,000 | Before sales tax and tractor costs |
What Land Pride wood chippers cost by capacity
Land Pride PTO wood chippers are priced by the maximum branch size and the tractor power needed to operate them. As a planning estimate, smaller 4-inch-capacity machines may fall near $4,000-$5,500; mid-size 5-inch units may be about $5,000-$7,000; and larger 8-inch-capacity models can reach roughly $8,000-$10,000 or more. Model availability and dealer quotes change over time.
A practical new-machine budget is $4,000-$10,000, excluding sales tax and any tractor upgrade. These estimates assume a standard machine, ordinary dealer preparation, and no unusual freight or financing charges. Assumptions: U.S. dealer purchase, typical agricultural equipment pricing, normal delivery access.
Which dealer charges raise the equipment quote
The advertised price may not include delivery, setup, or local taxes. Ask the dealer to separate the chipper price from each charge so an online listing and an in-person quote can be compared on the same basis.
| Quote item | Typical range | What changes the charge | Budget note |
|---|---|---|---|
| Chipper equipment | $4,000-$10,000 | Capacity, model, dealer discount | Largest portion of the bill |
| Dealer setup | $100-$400 | Assembly and inspection included | Confirm before purchase |
| Delivery | $100-$800 | Distance and loading needs | Pickup may avoid this fee |
| Accessories or PTO parts | $50-$500 | Included driveline and required add-ons | Check package contents |
| Sales tax | About 0%-10%+ | State and local tax rules | Applied to taxable charges |
Delivery and tax can add several hundred dollars or more to a low advertised price. The dealer should identify whether the driveline, guards, and initial setup are included rather than assuming they come with every listing.
How branch diameter and tractor horsepower change price
Capacity is a major price driver, but it must match the tractor. A chipper rated for 4-inch material generally costs less than an 8-inch model, while larger capacity may require more tractor horsepower and a higher PTO output. Check the specific model’s manual for required horsepower, PTO speed, hitch category, and driveline details.
Material also affects real-world output. Dry, straight branches are easier to process than green, forked, or knotty wood; a machine’s maximum diameter is not a promise of equal performance on every species. Before paying for more capacity, compare the chipper’s stated limit with the largest branches regularly handled and the tractor’s rated PTO horsepower.
For a used unit, inspect knives, anvil condition, rotor, bearings, guards, and the PTO shaft. Dull knives or neglected wear parts can quickly narrow the savings.
How to lower the Land Pride chipper purchase price
Request written, itemized quotes from multiple authorized dealers, using the same model and included equipment. Ask whether a current dealer discount, floor model, or seasonal inventory unit changes the price, and compare the delivered total rather than the equipment-only number.
Avoid paying for excess capacity or duplicate accessories that the tractor and job do not require. If the tractor already meets the manufacturer’s specifications, replacing or upgrading it solely for occasional chipping may cost more than hiring a chipping service. For modest, intermittent brush, compare rental or contractor pricing before buying.
Used Land Pride models versus new dealer inventory
Used Land Pride chippers commonly list around $2,000-$7,500, with older or smaller machines near the lower end and newer, larger, well-maintained units toward the top. Listings can be above this range when condition is excellent or local supply is limited. A used machine without clear service history deserves a closer inspection and a price allowance for repairs.
Compare the used asking price with a new dealer quote that includes setup and delivery. A $3,500 used unit may not be the cheaper choice if it needs knives, bearings, or driveline repairs; request a demonstration under load when possible. Condition and included parts matter as much as model year when judging used value.
What tractor setup and delivery add to the job
These machines use tractor PTO power, so buyers generally do not pay an engine installation fee, but they do need a compatible tractor and properly fitted driveline. Dealer setup often involves assembly and inspection rather than building a separate power unit. Confirm whether the quoted machine is ready to attach or requires additional parts.
Delivery estimates of roughly $100-$800 reflect short local hauls through longer-distance transport; rural delivery, limited access, or special unloading can raise the charge. Pickup can reduce the bill if the buyer has a suitable trailer and safe loading equipment. Confirm transportation and PTO compatibility before scheduling pickup.
Why Land Pride chipper quotes vary by U.S. location
Local dealer inventory and freight can move a quote by about 5%-15% compared with a nearby market, while remote delivery or limited dealer competition may produce larger differences. These are comparison allowances, not fixed regional rates. Sales tax also varies by state and locality, and some agricultural-use exemptions depend on local eligibility rules.
Ask dealers in neighboring towns for the same model and included package, then compare the final pre-tax total and delivery terms. A quote with freight, setup, and driveline included can be better value than a lower equipment-only price.
When add-ons or repairs change the ownership budget
Budget separately for replacement knives, anvil service, and other wear items if a machine will process substantial amounts of wood. Costs depend on parts, labor, and the condition of the rotor and housing; ask a dealer for a parts estimate based on the exact model rather than applying a generic repair price.
For a used chipper, a dealer inspection may help identify wear before purchase. Compare the inspection and repair estimate with the cost of a newer unit and any remaining warranty coverage. Condition-based repair allowances are more useful than choosing a used machine by sticker price alone.