Landmark Solaris shingles typically cost about $150-$250 per roofing square for materials, while a professionally installed roof often runs $550-$950 per square. The final price depends on roof size and pitch, tear-off needs, location, underlayment and flashing, and whether a local supplier has the color and product in stock.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Landmark Solaris shingles | $150 per square | $200 per square | $250 per square | Shingle-only estimate; availability and color affect pricing. |
| Installed roofing | $550 per square | $725 per square | $950 per square | Typical replacement scope with labor and standard materials. |
| 1,500-square-foot roof | $8,250 | $10,875 | $14,250 | About 15 squares before waste; actual roof area may be larger. |
| 1,500-square-foot roof with tear-off | $9,000 | $12,000 | $15,750 | Includes a typical removal allowance, not major deck repairs. |
What Landmark Solaris Costs Per Roofing Square
A roofing square covers 100 square feet of roof surface, not 100 square feet of house floor area. Retail or contractor pricing for Landmark Solaris shingles commonly falls around $150-$250 per square for shingles alone, before underlayment, starter strips, ridge products, labor, and disposal. Some quotes may price by bundle; three bundles generally cover one square, subject to product packaging and installation details.
For a complete replacement, a practical planning range is $550-$950 per square, or roughly $5.50-$9.50 per roof square foot. The low end generally assumes a straightforward roof, standard access, limited tear-off, and moderate local labor rates. The high end can reflect steep or cut-up roof geometry, higher-cost markets, extra layers to remove, upgraded flashing, or repairs to the roof deck.
A 20-square roof might therefore cost approximately $11,000-$19,000 installed. This is a preliminary budget, not a fixed national price: contractors may include different accessories and removal work, and some may not be able to source the exact Solaris product. Assumptions: Asphalt-shingle replacement, standard colors and accessories, normal access, no extensive structural repairs.
How Shingles, Labor, and Tear-Off Shape the Quote
Roofing estimates combine materials and field work with removal, disposal, and job-specific details. Ask each contractor to identify the number of squares, waste allowance, product name, and included accessories so that bids can be compared on the same scope.
| Quote item | Typical price | What changes the charge | Scope to verify |
|---|---|---|---|
| Solaris shingles | $150-$250 per square | Supplier, color, availability | Exact product and quantity |
| Underlayment and accessories | $50-$125 per square | Ice barrier, starter, ridge and flashing choices | Which materials are included |
| Installation labor | $150-$300 per square | Pitch, layout, height and local wages | Labor scope and cleanup |
| Removal and disposal | $50-$150 per square | Existing layers, dump fees and access | Number of layers included |
| Decking and flashing repairs | $75-$125 per labor hour, plus materials | Hidden damage and repair extent | Unit rates and approval process |
Typical labor pricing varies widely by contractor and market; a crew may quote by the square rather than by the hour. A useful labor check is . For example, 40-60 crew labor hours at an equivalent blended rate of $75-$125 per hour implies $3,000-$7,500 in labor, though contractor pricing also covers supervision, insurance, and operating costs. Those hourly equivalents are a comparison aid, not a promise of how a company bills.
The most useful comparison is the complete installed scope, not the shingle-only price. A low material line can be outweighed by a separate tear-off charge, incomplete flashing work, or a limited allowance for damaged decking.
Roof Pitch, Waste, and Decking Can Raise the Price
Roof shape and installation conditions can push a project outside the basic range. A simple gable roof may need around 5%-10% extra shingles for cuts, while a roof with hips, valleys, dormers, or several ridges may require roughly 10%-15% waste. The contractor should show how the waste factor was calculated rather than applying it without explanation.
Pitch also affects handling and production. A roof at 6:12 or steeper may need additional fall protection and slower installation; very steep or difficult sections can add roughly 10%-25% to labor compared with an easy, walkable roof. Two-story access, limited staging space, and landscaping that complicates material delivery can add time or equipment costs.
Deck condition is another major unknown. Replacing a small amount of soft plywood might add a few hundred dollars, while extensive rot, damaged fascia, or ventilation corrections can add $1,000-$4,000 or more. Ask the estimate to state a per-sheet or per-square-foot price for extra decking and require approval before work beyond the allowance begins.
Solaris is a reflective asphalt-shingle option, but its cool-roof value depends on the selected product, roof design, local climate, and installation. A higher price does not automatically mean a specific energy-bill reduction. Check product documentation and local requirements rather than assuming that a reflective shingle qualifies for an incentive.
Why Solaris Roofing Quotes Differ Across U.S. Regions
Regional labor, disposal, insurance, and supplier costs can create substantial differences for the same roof. As a broad budgeting comparison, installed quotes in lower-cost rural or smaller-market areas may be about 10%-20% below a national-style estimate, while dense coastal metros and high-wage markets can run 15%-30% above it. These are planning differences, not guaranteed regional price lists.
Weather and local construction practices matter too. Areas with frequent storms may have higher demand after damaging weather, and some jurisdictions require specific underlayment or flashing details. A contractor working in a market with limited Solaris stock may need to order material or offer a substitute, which can change the price and schedule.
For a 20-square project, a $725-per-square midpoint implies about $14,500 before unusual repairs. Applying a 15% lower-market difference would indicate roughly $12,325; a 20% higher-market difference would indicate about $17,400. Compare local written bids because a national range cannot account for a specific roof, permit rules, or current supplier inventory. Assumptions: Same roof size and scope; regional percentage is illustrative and excludes major structural work.
Three Example Roof Quotes With Different Scopes
These examples show how roof size, removal, and complexity affect totals. Roof measurements below refer to surface area converted into squares, not the home’s interior area. Actual quotes should identify whether taxes, permits, and contingency allowances are included.
| Project | Scope and labor | Approximate quote | Per square |
|---|---|---|---|
| 12 squares, simple roof | Solaris materials, 5%-10% waste, one-layer removal; about 24-36 crew hours | $6,600-$9,000 | $550-$750 |
| 20 squares, average roof | Solaris materials, accessories, removal and disposal; about 40-60 crew hours | $11,000-$16,000 | $550-$800 |
| 24 squares, steep and cut-up roof | Higher waste, difficult access, removal and limited deck allowance; about 60-90 crew hours | $18,000-$27,600 | $750-$1,150 |
A smaller job can have a higher per-square charge because setup, delivery, and disposal costs are spread over fewer squares. The steep-roof example exceeds the standard installed range because of added handling, geometry, and repair allowance; it should not be treated as a typical price for a simple roof.
Removal, Delivery, and Roof Details That Add Fees
Removing existing shingles commonly adds about $50-$150 per square, with more cost possible when several layers must come off or disposal is expensive. A contractor may also charge a minimum project fee or separate delivery and dump charges. Confirm whether the stated quote includes a full cleanup and magnetic nail sweep around the property.
Flashing around chimneys, skylights, vents, and wall transitions can require replacement or careful integration. Minor flashing work may be included, while new chimney flashing or complicated skylight details can add several hundred dollars per feature. Ridge ventilation, drip edge, ice-and-water membrane, and new pipe boots should be listed clearly rather than hidden inside a vague “miscellaneous” line.
Permits and inspections vary by city and project scope. Allow roughly $100-$500 for a straightforward local permit where one is required, but some jurisdictions charge more or require additional inspection or code work. Ask who obtains the permit and whether permit fees are included. Roofing incentives are location- and product-specific; verify current eligibility with the relevant utility or government program before subtracting a rebate from the budget.
Solaris Shingles Compared With Standard Asphalt Options
Standard architectural asphalt shingles can sometimes cost less than Solaris, with shingle-only pricing often around $100-$200 per square depending on brand and grade. A reflective Solaris product may carry a materials premium of roughly $25-$75 per square when available. The installed difference can be smaller or larger depending on sourcing and whether the project needs the same labor and accessories either way.
Compare product specifications, warranty terms, color selection, and local availability rather than treating every “cool roof” label as interchangeable. If Solaris is not stocked, a contractor may price a comparable reflective shingle or a standard architectural alternative. The replacement should be named precisely in the quote and approved before ordering; otherwise, a lower price may represent a different product.
Repair may cost less when damage is limited to a small, accessible area and matching shingles are available. A modest repair could run roughly $300-$1,000, while broad granule loss, repeated leaks, or widespread shingle failure may make replacement more practical. Repair pricing depends heavily on minimum service charges and matching stock, so ask for a separate repair quote before comparing it with full replacement.
How to Lower the Landmark Solaris Roofing Price
First, control the scope: confirm the measured roof area, waste percentage, removal layers, and any decking allowance. Ask for separate prices for required repairs and optional upgrades. This makes it easier to compare bids without removing items that protect the roof or satisfy local code.
Request two or three written estimates with the same Solaris product, accessory list, disposal plan, and warranty description. A price that is 20% or more below other detailed bids deserves closer review; it may omit tear-off, flashing, or cleanup. Check the contractor’s licensing and insurance requirements for the location, and ensure the written agreement explains change orders and payment milestones.
Scheduling outside a severe storm-repair rush may improve availability, though weather, contractor calendars, and local demand can limit the opportunity. Avoid choosing a date that risks installation in unsuitable weather simply to pursue a lower quote. If the exact Solaris color is costly or unavailable, compare a clearly specified alternative rather than accepting an unspecified substitution.
The clearest savings usually come from avoiding surprise scope and comparing equivalent bids, not cutting necessary installation steps. Keep a contingency of about 5%-10% for hidden decking or flashing issues, especially on older roofs. Assumptions: No major structural work; contingency is a budget reserve, not an automatic contractor charge.