Laundry Jet installation cost is typically $2,000-$5,000, with an average near $3,500 for a standard two-story home with one laundry collection point. The final price depends mainly on the system and number of inlets, the length and route of the tubing, and whether installation requires opening walls or ceilings.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed system | $2,000 | $3,500 | $5,000 | One collection point, typical retrofit access |
| Equipment only | $1,500 | $2,300 | $3,200 | System configuration and inlet count affect price |
| Installation labor | $500 | $1,200 | $2,500 | More for long or concealed duct routes |
| Additional inlet | $250 | $450 | $800 | Installed, before major wall repairs |
Laundry Jet system prices for a typical two-story home
A basic installation generally costs $2,000-$3,000 when the blower, tubing, and inlet can be fitted with straightforward access. A midrange project with longer duct runs or more than one collection point commonly totals $3,000-$4,500. Complex retrofits can reach $5,000-$7,000 when installers need to route tubing through finished walls, add multiple inlets, or coordinate repairs.
For an initial budget, $3,500 is a reasonable planning figure for a standard one-inlet project. These estimates assume a professionally installed residential system, ordinary access, and no major electrical or structural work. Assumptions: U.S. contractor pricing, standard system configuration, and typical residential access.
Blower, tubing, and labor on a Laundry Jet quote
Equipment is a large share of the bill, but labor and finish work can change the total substantially. Ask whether the quote covers the blower, all tubing and fittings, inlet doors, electrical connection, testing, and patching. Some bids price wall or ceiling repairs separately.
| Cost component | Typical price | What changes the charge | Common billing basis |
|---|---|---|---|
| Blower and controls | $1,000-$2,000 | System model and capacity | Per system |
| Tubing and fittings | $300-$900 | Run length, bends, and branches | Per project |
| Inlet and door assembly | $250-$800 | Number and location of inlets | Per inlet |
| Installation labor | $500-$2,500 | Access, routing, and crew time | $75-$150 per hour |
| Wall repair and paint | $200-$1,200 | Openings and finish quality | Per project |
Confirm that equipment, installation, and finish repairs are all included before comparing totals. A low equipment price alone does not indicate a low installed cost.
How floor count and duct length change installation price
The easiest installations place the collection point near the laundry room and keep tubing runs short and accessible. A run of roughly 15-25 feet with few bends may fit a standard quote; routes exceeding 30-40 feet, crossing floors, or requiring several branches can add $500-$1,500 or more. More than two inlets may add about $250-$800 per inlet, depending on routing and wall access.
Finished basements, tight joist bays, masonry, and limited attic access can raise labor because they slow installation or require additional openings. Electrical work may add $150-$500 if a suitable outlet or circuit is not available near the blower. Ask the installer to identify the planned tubing route and count every inlet in the written estimate.
Save money by choosing accessible routes and fewer inlets
Placing the blower close to the laundry room and choosing an accessible route can reduce labor and avoid extensive drywall work. One well-positioned inlet may serve the main collection area; extra openings make sense when they solve a real carrying or access problem, but each adds materials and installation time.
Compare at least two itemized quotes using the same inlet count, tubing route, finish scope, and equipment configuration. If a renovation is already opening walls or ceilings, coordinating installation with that work may reduce later patching costs. Avoid assuming that a DIY installation will cost only the equipment price: routing, sealing, electrical requirements, and commissioning affect system performance and may affect warranty coverage.
The most controllable savings usually come from limiting unnecessary branches and avoiding concealed, difficult routes.
Three Laundry Jet installation quotes by project scope
These examples show how access and system size can change a bid. They are planning scenarios, not guaranteed national prices.
| Project | Scope and labor | Estimated total |
|---|---|---|
| Accessible new-build route | One inlet, 15-foot run, 6-8 labor hours | $2,000-$3,000 |
| Typical finished two-story home | Two inlets, 25-foot route, 10-14 labor hours | $3,200-$4,800 |
| Complex retrofit | Three inlets, 40-foot route, 18-24 labor hours | $5,000-$7,000 |
The complex retrofit costs more mainly because access and routing increase labor, not simply because the system has more tubing. Local finish-repair rates and electrical needs can shift these totals.
Installer hours and wall access explain many price gaps
A straightforward installation may take one crew about 6-10 hours; a typical retrofit can take 10-16 hours, while a difficult multi-floor route may require two days. At roughly $75-$150 per labor hour, an extra 8 hours can add $600-$1,200 before materials or subcontracted drywall repair.
Ask whether the quote includes the electrician, drywall finishing, cleanup, and a system test. A separate service call or site assessment may cost $75-$200, although some contractors credit that charge toward installation. Clarify which trades are included so separate invoices do not push the project beyond the quoted budget.
Regional labor rates shift Laundry Jet installation estimates
Labor costs vary across the country. Dense, high-cost metro areas may price an otherwise comparable project 15%-30% above a national midrange estimate, while lower-cost rural markets may run 10%-20% below it. Differences reflect contractor availability, travel, local wages, and the cost of finish work, rather than a fixed regional equipment price.
Travel or minimum charges can matter in rural areas, especially where few installers service the system. In urban areas, parking, building access, and work-hour restrictions may add time. Use local written bids for a firm budget and treat national ranges as a starting point.
When extra Laundry Jet work raises the final bill
Wall or ceiling openings and repairs can add $200-$1,200, depending on how many surfaces must be restored and whether paint matching is needed. Difficult electrical access may add $150-$500, and structural obstructions or rerouting can add $500-$1,500 or more. Moving laundry equipment or clearing a work area may also be billed if it is not included.
Permits are not typically the largest expense for this type of residential installation, but local rules and electrical changes can affect requirements. Confirm whether the contractor handles any required permits and inspections, and whether the proposal includes taxes, disposal, and warranty terms. Request a written change-order rate for concealed obstructions before work begins.