Lennox wood stove prices depend on whether the unit is used, leftover stock, or a comparable replacement, since Lennox-branded wood stoves are legacy products rather than a widely available current lineup. Buyers commonly spend $500-$2,500 for a used stove and roughly $2,000-$8,000 total for a professionally installed stove and suitable venting; chimney work, condition, and local labor rates drive the largest differences.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Lennox stove | $500 | $1,300 | $2,500 | Price varies by model, condition, and included parts |
| Inspection and basic cleaning | $150 | $300 | $600 | More if repairs or difficult access are needed |
| Standard installation | $1,000 | $2,500 | $4,500 | Assumes an existing, usable chimney or straightforward vent route |
| Chimney liner or major vent work | $1,000 | $2,500 | $5,000 | Can exceed this range for extensive masonry repairs |
| Complete installed project | $2,000 | $4,500 | $8,000 | Stove, labor, and typical venting; unusual construction costs extra |
What a Lennox Wood Stove Usually Costs to Buy
A used Lennox stove commonly lists for $500-$2,500, while the total project often lands between $2,000 and $8,000 after installation and venting. The purchase range reflects the limited supply of older Lennox Hearth Products models. Local listings, stove dealers handling trade-ins, and salvage sources may have units, but availability and documentation vary.
Lower-priced units are often older, untested, or sold without the required door hardware, firebricks, blower, or vent connector. A clean, complete stove with a known model number and visible condition can command more. Collectible appearance alone does not establish safe operation or code compliance.
Installed estimates assume a typical freestanding stove, standard home access, and no major structural work. A suitable existing chimney can keep the job toward the low end. A new insulated chimney, liner, hearth construction, or repairs can add several thousand dollars. Assumptions: U.S. dollars, ordinary residential access, and standard contractor labor; regional quotes and model condition vary.
How Stove, Labor, and Chimney Costs Shape the Quote
The stove is only one part of the invoice; venting and installation can equal or exceed the purchase price. The breakdown below gives typical ranges for a used Lennox installation. Items such as a new chimney or masonry repair may be alternatives to basic liner work rather than charges that every project needs.
| Quote item | Typical price | How it is charged | What changes it |
|---|---|---|---|
| Used Lennox stove | $500-$2,500 | Per unit | Model, completeness, condition, and seller |
| Installation labor | $600-$1,800 | About $75-$125 per hour | Two-person crew, access, hearth, and vent route |
| Chimney liner and connector | $1,000-$3,000 | Often $30-$80 per linear ft installed | Height, diameter, liner material, and chimney condition |
| Hearth protection and accessories | $200-$1,200 | Per project | Floor dimensions, wall shielding, and required clearances |
| Inspection, cleaning, or disposal | $150-$700 | Per visit or item | Inspection scope, creosote, and old-unit removal |
A quote may combine labor and materials, so the amounts do not necessarily appear as separate line items. Ask whether the price includes a site inspection, delivery, removal of the old appliance, chimney cleaning, permit fees, and final inspection.
Basic installation labor may take 6-12 hours with a small crew when the chimney is usable and the stove location is prepared. A new chimney, roof access, masonry work, or relocation can extend the job to one or more days. Contractors may charge a minimum service fee of $150-$300 for inspection or troubleshooting before issuing a full installation quote.
Why Model Condition, BTUs, and Chimney Height Change Prices
Two stoves with the same Lennox name can differ substantially in value and installation cost because model specifications and condition are not interchangeable. Confirm the model and serial number from its rating plate, then compare the manual’s clearances, vent size, and installation requirements with the home. Missing identification can make permitting, parts sourcing, and insurance review more difficult.
Firebox capacity and rated heat output affect the appropriate room size and may influence price. Units around 1,500-2,000 square feet of stated heating coverage are often priced differently from smaller appliances, but coverage claims depend on insulation, layout, climate, and wood quality. Do not assume a larger stove is a better fit; an oversized unit can be harder to operate cleanly at a low burn.
Chimney height is a direct cost variable. A 15-20-foot liner may cost roughly $450-$1,600 for the liner material alone at common per-foot rates, before labor, cap, connector, and access charges. A chimney taller than 25 feet, an offset flue, or a roofline requiring special access can push installed venting well above $3,000.
Condition also matters beyond surface rust. Cracked or warped firebox panels, damaged door seals, worn hinges, missing firebricks, and a nonworking blower can require parts or specialist assessment. Minor replacement parts may cost $50-$300; harder-to-find components can cost more or be unavailable. A stove that has been exposed to moisture or modified should be inspected before purchase.
Clearances are another quote driver. If the proposed location cannot meet the manual’s distance requirements, a wall shield or different placement may be needed. Hearth extensions, floor protection, and noncombustible wall materials can add $200-$1,200, while extensive framing changes cost more. Estimate basis: standard-height chimney, common liner diameter, and no structural reconstruction.
Used Lennox Stoves Versus Current Replacement Models
A low used-stove price can become less economical if the appliance needs hard-to-source parts or the chimney requires a full upgrade. Compare the purchase price plus inspection, repairs, installation, and venting—not just the seller’s asking price.
| Option | Appliance price | Typical installed total | Price considerations |
|---|---|---|---|
| Used Lennox stove | $500-$2,500 | $2,000-$8,000 | Lower purchase cost; parts and certification need checking |
| Current entry-level wood stove | $1,500-$3,000 | $3,000-$7,000 | New warranty and current documentation; venting may still be extra |
| Midrange current stove | $3,000-$5,000 | $4,500-$9,000 | More finish and feature choices; installation scope remains decisive |
| Wood insert replacement | $2,000-$4,500 | $4,000-$9,000 | Fits a fireplace opening; liner and surround affect labor |
New stove prices are broad market comparisons, not Lennox prices. A current model may be a practical substitute when a used Lennox cannot be verified, when critical parts are missing, or when local emissions rules require a compliant appliance. Verify the specific model’s certification and installation instructions with the seller and installer.
Repair can make sense when the stove is structurally sound and needs modest service. A $200-$600 repair may be more economical than replacement, but a cracked firebox or unavailable safety-critical component is a different situation. A qualified stove technician should assess damage before the unit is fired.
What Three Realistic Lennox Stove Quotes Might Include
Project scope explains why installed totals for apparently similar stoves can differ by several thousand dollars. These examples illustrate typical budgeting scenarios, not guaranteed local bids.
| Scenario | Scope and labor | Estimated total |
|---|---|---|
| Existing lined chimney | $700 used stove, 6 labor hours, inspection, connector, and minor hearth work | $2,000-$3,200 |
| New stainless liner | $1,400 stove, 10-12 labor hours, 20-foot liner, cap, and hearth adjustment | $4,000-$6,200 |
| Chimney repair and replacement setup | $2,000 stove, 16-24 labor hours, liner, masonry repair, removal, and permit | $6,500-$10,000 |
In the first example, an existing chimney is assumed to pass inspection and match the appliance requirements. The second assumes a sound masonry chimney that needs a properly sized liner. The third includes substantial work and can exceed the stated band if the chimney needs rebuilding, the roof is difficult to access, or the hearth must be reconstructed.
Request an itemized written quote that states the stove model, vent diameter and length, installation labor, hearth and wall protection, removal, permits, and inspection. If two bids differ by more than $1,000, compare included materials and scope before treating the lower estimate as the better value.
Regional Labor Rates and Chimney Access Affect Installed Prices
Local labor and access can move a Lennox stove installation roughly 10%-30% above or below a typical U.S. estimate. Large metropolitan markets and high-cost coastal areas commonly quote toward the upper end because of labor, travel, and overhead. Smaller cities and rural areas may be 10%-20% lower, although fewer qualified installers can limit competition.
Climate and housing stock influence the job as well. Older homes with masonry chimneys may need liner, clearance, or repair work; newer homes may require a complete insulated chimney system because no suitable flue exists. Rural delivery distance, roof pitch, snow conditions, and seasonal access can add fees. These are quote tendencies, not fixed regional price indexes.
Ask local contractors to identify the assumptions behind a regional premium. A higher quote may include roof protection, scaffolding, code-required components, or more extensive inspection rather than simply a higher stove markup. Compare bids from installers familiar with wood-burning appliances and local requirements.
Permits, Inspections, and Removal Can Add Fees
Permit and inspection rules depend on the city, county, and installation type, so they should be confirmed before buying a used unit. Permit charges commonly fall around $50-$300, while a chimney inspection may cost $100-$300. Some jurisdictions require a separate final inspection or documentation that the appliance and venting meet applicable rules.
Removal of an existing stove often adds $100-$400, depending on weight, stairs, and disposal. Chimney sweeping may cost $150-$350 for an ordinary service visit, with extra charges for heavy creosote or difficult access. If a quote excludes removal or cleaning, adding these fees can change the apparent savings from a lower bid.
Insurance providers may request details about the appliance and installation. Because Lennox models are older, keep the rating-plate information, manual if available, inspection report, and installer documentation. Do not rely on a seller’s assurance that a stove is acceptable under current local codes.
Wood stoves generally do not qualify for the same federal tax treatment in every year or under every circumstance. Incentives can change and may depend on certified efficiency, installation date, and current law. Confirm eligibility with the relevant tax authority or utility before subtracting a credit from the project budget.
How to Lower the Installed Price Without Skipping Safety
The strongest savings usually come from choosing a sound stove and limiting unnecessary chimney or finish work—not from omitting inspection or required vent components. Have a qualified installer inspect the candidate stove and chimney before paying a nonrefundable amount. That check can reveal a missing liner, damaged firebox, or clearance problem while the purchase can still be reconsidered.
Use an existing chimney only when it is inspected, correctly sized, and suitable for the specific appliance. Reusing an unsafe or incompatible flue can create fire and carbon-monoxide hazards and may cost more to correct later. Compare the cost of a new liner with the price of another installation route before assuming the old chimney is usable.
Prepare the room in advance by clearing the installation path and confirming floor protection requirements. Do not perform work that affects clearances, framing, or venting without approval from the installer and local authority. Avoid premium decorative surrounds or optional blowers unless they are needed for the intended installation.
Get at least three itemized quotes using the same stove model and scope. Ask whether each price includes tax, permit, delivery, removal, liner, cap, connector, hearth work, and cleanup. Scheduling outside the busiest fall and winter demand may improve contractor availability, though discounts are not guaranteed and safe installation timing should take priority.
Finally, price the full project before deciding whether a used Lennox is a bargain. A $900 stove that needs $2,500 in liner and repairs may cost more than a newer unit with documented condition and a warranty. Budget check: purchase price + inspection and repairs + venting + labor + permits and disposal.