Leslie pool installation cost depends on whether the project is an above-ground pool, an inground pool, or a pool package installed by a local contractor. Leslie’s Pool Supplies does not publish one nationwide installation price; buyers should confirm whether a local store offers installation and request a written, site-specific quote. Across the U.S., basic above-ground projects often total $3,000-$15,000, while inground installations commonly run $45,000-$120,000 or more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Above-ground pool installed | $3,000 | $8,000 | $15,000 | Pool, basic setup, and typical site preparation |
| Inground pool installed | $45,000 | $75,000 | $120,000+ | Excavation, shell, equipment, and basic finish |
| Above-ground pool package | $1,500 | $4,000 | $8,000 | Pool and equipment; installation may be extra |
| Inground pool shell | $25,000 | $45,000 | $75,000+ | Shell and core construction, before some upgrades |
Assumptions: U.S. dollars; ordinary access and site conditions; final prices vary by region, pool size, material, and included work.
Typical Leslie’s Pool Installation Prices by Pool Type
For a standard above-ground pool, a complete installed project typically costs $3,000-$15,000, with an approximate midpoint of $8,000. Smaller, simpler packages with a level site tend toward the lower end; larger pools, upgraded walls, decking, and electrical work increase the total. Pool and equipment alone may cost $1,500-$8,000 before delivery, setup, or site work.
Inground projects generally range from $45,000 to $120,000+, with many straightforward installations near $75,000. Vinyl-lined pools tend to cost less than comparable fiberglass or custom concrete builds, though size, finish, access, and local labor can change that comparison. The most useful first step is identifying the pool type and asking which installation tasks are included in the quote.
Excavation, pool equipment, and labor in the quote
Installation quotes can combine product, site work, labor, equipment, and delivery in different ways. The ranges below are broad planning estimates, not fixed Leslie’s charges; some contractors bundle several tasks under one project price.
| Quote component | Above-ground range | Inground range | Pricing basis |
|---|---|---|---|
| Pool materials or shell | $1,500-$8,000 | $25,000-$75,000+ | Pool size and material |
| Installation labor | $800-$3,500 | $10,000-$30,000 | Crew and project scope |
| Site preparation and excavation | $300-$2,000 | $2,000-$12,000 | Access, soil, and grading |
| Pump, filter, and plumbing | $500-$2,000 | $3,000-$10,000 | Equipment and plumbing layout |
| Delivery and disposal | $100-$1,000 | $500-$3,000 | Distance and debris volume |
Labor estimate example: 40-80 crew hours at $50-$100 per worker-hour can represent roughly $2,000-$8,000 before specialized equipment and other trades. Check whether electrical connections, startup, permits, and cleanup appear as included items or separate charges.
How size, material, and site access change the estimate
Pool dimensions have a direct effect on excavation, materials, water volume, and equipment capacity. An above-ground pool around 18-24 feet across usually costs less to install than a larger 27-foot model, especially when a larger footprint requires extra grading or a bigger filter system. Inground pools around 12 by 24 feet are generally less expensive than 16 by 32 feet or larger.
Material and site conditions also matter. A vinyl-liner inground pool may start near $45,000, while fiberglass often reaches $55,000-$100,000 and custom concrete commonly reaches $70,000-$120,000+. Slopes, rocky soil, narrow equipment access, or groundwater can add thousands. Ask how the estimate changes if excavation uncovers rock or unsuitable soil, and get the change-order rate in writing.
Control the price with a clear installation scope
Before accepting a quote, compare the same pool dimensions, equipment capacity, finish, warranty, and preparation work across bids. A low price that excludes leveling, electrical work, plumbing, or cleanup may not be less expensive after add-ons. Ask for an itemized estimate and confirm who handles permits and inspections.
Cost can also be reduced by choosing standard equipment, limiting decking and landscaping to the initial scope, and preparing the installation area when the contractor allows it. Avoid removing necessary drainage or safety work just to lower the bid. Keep upgrades separate so the base installation price can be compared fairly.
Regional labor rates and delivery can shift pool prices
Labor and permitting often make the same pool more expensive in high-cost metro areas than in smaller markets. As a planning allowance, urban quotes may be 10%-25% above a national midpoint, while rural delivery or contractor travel can add 5%-15%. These are broad comparisons rather than guaranteed local adjustments.
Climate and local rules can also affect the project. Frost depth, required barriers, drainage standards, and electrical codes vary, and a permit or inspection may add about $100-$1,500 depending on the jurisdiction and scope. Request a local quote that lists permit fees rather than relying on a national package price.
Installation time affects labor and scheduling charges
A prepared above-ground pool may take one to three days to assemble, while leveling and access work can extend the visit. Inground construction often takes six to twelve weeks from excavation through startup, although weather, inspections, material delivery, and subcontractor scheduling can lengthen the calendar time.
Labor is commonly billed within a fixed contract rather than by the hour, but extra work may be priced separately at roughly $50-$100 per worker-hour. Rush scheduling or a short-notice delivery can also carry added fees. Confirm the expected crew size, working days, and hourly charge for work outside the signed scope.
Decking, electrical work, and removal add to the total
Common additions include a basic pool deck, upgraded pump or filter, heater, lighting, safety barrier, and old-pool removal. A modest deck may add $2,000-$10,000, while a heater can add $1,500-$5,000 installed. Electrical work may cost $500-$3,000 when the panel and wiring route are straightforward; long runs or panel upgrades can cost more.
Removing and disposing of an existing above-ground pool may cost $300-$2,000, excluding extensive restoration of the yard. Inground removal is typically far more involved and may exceed $5,000. Price optional features separately and verify whether disposal, haul-away, and lawn repair are included.
Above-ground installation costs less than inground construction
Above-ground pools are generally the lower-cost choice because they require less excavation and simpler construction. A modest, level-site installation may land near $3,000-$6,000; larger models with decking and electrical upgrades can exceed $10,000. Inground construction offers more size and finish choices but often starts around $45,000 before substantial landscaping or premium features.
Repairing an existing pool may cost less than replacing it when the problem is limited to a pump, filter, liner, or small plumbing leak. A pump replacement can run about $500-$1,500 installed, while a vinyl liner replacement may cost $3,000-$6,000. Compare repair and replacement quotes using the remaining life of the pool and equipment, not just the first-year price.