LG commercial washer prices typically range from about $2,000 to $12,000 for the washer alone, depending mainly on capacity, controls, and payment equipment. A small business installation often totals $2,500-$15,000 after delivery, hookups, and site work; larger laundry-room projects can cost more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Commercial washer | $2,000 | $5,500 | $12,000 | Capacity and model type drive equipment price |
| Payment controls | $300 | $900 | $2,000 | Coin, card, or networked system |
| Delivery and installation | $300 | $1,000 | $3,500 | Higher when plumbing or electrical work is needed |
| Typical installed total | $2,500 | $7,000 | $15,000 | Assumes one washer and ordinary access |
What an LG commercial washer costs by capacity
Small commercial front-load washers in roughly the 20-27 lb class commonly list or quote around $2,000-$4,500 before installation. Mid-capacity machines around 30-40 lb often fall near $4,000-$7,500, while high-capacity models of about 50-60 lb can reach $7,000-$12,000 or more. Availability and configuration vary by distributor.
For a single standard-capacity machine, a useful equipment-only planning average is about $5,500. That estimate assumes a new washer, standard commercial controls, and no special payment system or unusual freight. Assumptions: U.S. distributor pricing, standard materials, one machine, normal access.
How washer equipment, labor, and payment controls shape the quote
Equipment is usually the largest line item, but the quote may also include freight, installation, payment hardware, and site preparation. Ask whether the stated price includes tax, unloading, startup, and warranty coverage; commercial quotes may exclude several of these.
| Quote item | Typical price | Pricing basis | What changes it |
|---|---|---|---|
| Washer equipment | $2,000-$12,000 | Per machine | Capacity, controls, and model |
| Delivery and placement | $150-$800 | Per unit | Distance, stairs, and lift-gate needs |
| Installation labor | $300-$1,200 | Per unit | Existing hookups and access |
| Coin or card system | $300-$2,000 | Per machine or system | Payment type and management features |
| Plumbing or electrical changes | $250-$2,500 | Per project | Drain, water, circuit, and code needs |
Installer labor commonly runs about $75-$150 per hour, with a basic hookup taking 2-5 hours. Site work, rather than the washer hookup itself, is often what pushes an installed quote above the equipment price.
Capacity, spin speed, and controls that raise the price
Capacity is a key price threshold: moving from a roughly 27 lb unit to a 40 lb model can add $1,000-$3,000, while stepping up to a 50-60 lb washer may add several thousand dollars. Higher throughput can justify the premium in a laundromat or hotel, but a small property may not use the extra capacity.
Special controls and payment options also matter. Coin mechanisms may add a few hundred dollars, while card or networked payment systems can add $500-$2,000 per machine, plus any account or transaction charges. Confirm whether payment hardware is factory-integrated, retrofit, or sold separately.
Keep the LG washer installation scope from expanding
Replacing a washer in the same location with compatible water, drain, and electrical connections is generally less expensive than converting a room or adding a new laundry position. Check doorway width, floor condition, drain location, and circuit capacity before ordering to reduce return, rigging, and change-order fees.
Compare written quotes with the same capacity and payment setup. A low equipment price may not include freight, tax, setup, or warranty terms. Keeping the existing hookups and buying only the capacity the operation needs are two practical ways to control the total.
Installation time and site work for commercial laundry rooms
A straightforward swap can take 2-5 labor hours, with the washer unavailable for part of a day. New plumbing, electrical circuits, floor drains, or a difficult route through the building can extend work to a full day or require separate licensed trades. Contractors may charge a minimum service call of $150-$300 even for a short visit.
Where access is tight, labor and equipment-moving charges can add $200-$1,000. Ask whether the quote includes removal of the old washer, haul-away, and final testing. Written confirmation of these tasks helps prevent a second trip charge.
Three LG washer budgets for different business sizes
A small rental property replacing one standard-capacity washer might pay $2,500-$5,500 installed, including a $2,000-$4,000 machine and basic hookup. A small laundromat adding a 30-40 lb washer with card payment may budget $5,500-$9,500, depending on payment equipment and delivery.
A hotel or shared laundry room installing a 50-60 lb washer with upgraded controls may reach $9,000-$15,000 per position after installation and site adjustments. These examples assume ordinary freight and no major construction; multiple machines can lower per-unit delivery costs but may require larger electrical or plumbing upgrades.
Regional delivery and labor differences in U.S. quotes
Quotes in high-cost metro areas can run about 10%-25% above national planning averages because of labor, parking, access, and contractor overhead. Rural locations may have lower hourly rates but higher freight or travel charges, sometimes adding $100-$500 for delivery or service.
Local tax and permitting rules can also change the invoice. Replacing an existing washer usually involves fewer approvals than adding circuits or modifying drainage, but requirements vary by jurisdiction. Request a delivered-and-installed quote for the actual address rather than comparing equipment prices alone.
When a used LG washer beats buying new
A used commercial washer may cost roughly $800-$4,000 depending on age, capacity, condition, and whether it is tested or refurbished. It can reduce the upfront bill, but transport, installation, and repairs may erase the savings. Parts availability and service history are especially important for a heavily used machine.
Compare the seller’s warranty and return terms with a new unit’s coverage, and budget for inspection or repair if the machine is sold as-is. A used washer is most cost-effective when its cycle count, service records, and working payment controls can be verified.