LG dryer motor replacement cost usually runs $250-$550, with an average near $375 for a standard residential unit. The final price depends on the motor model, local labor rates, access, and whether the technician finds related belt, pulley, or electrical problems.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete motor replacement | $250 | $375 | $700 | Parts and labor; high quotes may include extra repairs |
| Replacement motor | $90 | $145 | $250 | Aftermarket or OEM part, depending on model |
| Diagnostic or service call | $75 | $110 | $150 | May be credited toward approved repair |
| Labor rate | $90/hr | $125/hr | $175/hr | Rates vary by city and service company |
What LG Dryer Motor Replacement Usually Costs
A straightforward motor replacement commonly totals $250-$450 when the dryer is accessible and the correct part is available. A reasonable national planning figure is about $375, while a difficult repair or premium-market service call can bring the bill to $550-$700.
Prices assume a standard electric or gas LG residential dryer, a compatible replacement motor, and no major damage to the drum support or control system. The motor itself often costs $90-$250; labor and the visit fee make up much of the remaining amount. Assumptions: standard residential dryer, normal access, and no additional component failures.
Budget about $250-$550 for a typical completed repair, and request an itemized quote before approving work.
How Parts, Labor, and Service Fees Shape the Bill
The estimate should separate the motor, labor, service call, and any secondary parts. Some repair companies apply the diagnostic charge to the final invoice; others charge it separately, including when the owner declines the repair. Ask whether taxes, delivery, and a labor warranty are included.
| Quote component | Typical range | What changes the charge | Common billing basis |
|---|---|---|---|
| Motor | $90-$250 | OEM versus aftermarket; model availability | Per part |
| Labor | $120-$300 | Disassembly, reassembly, and testing time | $90-$175 per hour |
| Diagnostic visit | $75-$150 | Location and service provider | Per visit |
| Belt, pulley, or idler | $20-$120 | Wear discovered during inspection | Per component |
| Delivery or disposal | $0-$50 | Part sourcing or old-unit removal | Per job |
Labor estimates often allow 1-2 hours for diagnosis, motor access, installation, and a test cycle. For example, 1.5 hours at $125 per hour equals $187.50 before parts or the service fee.
A quote that combines labor and parts into one total is harder to compare than an itemized estimate.
How Long Does an LG Dryer Motor Job Take?
Most motor replacements take about 1-2 hours of hands-on work after diagnosis, though scheduling and waiting for a model-specific motor can extend the calendar time. A technician may need additional time if the drum is difficult to remove, wiring connectors are damaged, or lint buildup complicates access.
Same-day service can cost more where providers add a $50-$150 urgency charge or have a higher minimum fee. A standard appointment is generally less expensive, especially when the technician can order the correct part in advance using the dryer’s model number.
Confirm whether the quote covers diagnosis, installation, testing, and a return visit if the motor must be ordered.
Which LG Dryer Specs Push the Quote Higher?
The exact model number matters more than the LG brand alone. A motor that is readily stocked may cost $90-$160, while a less common or OEM-only assembly can reach $180-$250. Older or discontinued units can also require extra sourcing time, and a compatible part should be confirmed before work begins.
Scope can rise when the dryer has more than one failure. A worn belt or idler pulley may add $20-$120 in parts, while damaged wiring or a failed control board can add substantially more. If the drum does not turn even after motor replacement, a separate diagnosis may be needed to identify the cause.
Ask the technician to verify the model number and list any additional parts separately rather than treating them as automatic motor-replacement costs.
Repairing the Motor Versus Replacing the Dryer
A motor repair at $250-$550 can be sensible when the dryer is otherwise in good condition and the appliance is relatively new. If the total reaches $600-$700, compare it with the price of a replacement dryer, delivery, installation, and haul-away. A new basic dryer often costs roughly $600-$1,000 before those services, while higher-end models can cost more.
Age and repair history matter. A unit with a prior heating-system, drum, or control-board repair may face further expenses, making replacement more attractive than a single motor repair. Conversely, a one-time motor failure on a well-maintained dryer does not by itself establish that the appliance is near the end of its useful life.
Compare the complete repair bill with the replacement appliance and delivery total, not just the dryer’s advertised price.
Regional Labor Rates Change LG Dryer Pricing
Labor and service-call charges are often higher in dense coastal metros than in smaller Midwestern or Southern markets. A similar repair may run about 10%-25% above a national midpoint in high-cost urban areas, while rural service can be 5%-20% higher if travel distance or limited technician availability adds a fee.
These are directional differences, not fixed regional prices; part cost may be similar nationwide, but local wages, taxes, and appointment availability vary. Ask whether the service call includes travel and whether the company charges a separate fee for parts pickup or a second visit.
Compare two or three local estimates using the same model number and the same scope of work.
Three LG Dryer Repair Quotes, From Basic to Complex
A basic example is a common model with a $110 aftermarket motor, 1.25 labor hours at $110 per hour, and a $75 visit fee: about $323 before tax. The technician confirms the motor is faulty and finds no additional worn parts.
A typical example uses a $160 OEM motor, 1.5 labor hours at $135 per hour, and a $95 diagnostic fee: about $458 before tax. A complex example may include a $230 motor, two labor hours at $165 per hour, a $125 service fee, and a $65 belt or pulley: about $750. This high case reflects multiple charges and should prompt a comparison with replacement pricing.
For any quote above $550, check whether added parts, return visits, or warranty coverage explain the difference.
Ways to Keep an LG Motor Repair Within Budget
Have the model number ready when requesting estimates; it is usually on the door frame or a label inside the door opening. Describe the symptom, such as humming without tumbling, but avoid assuming the motor is definitely the failed part. A belt, idler, or electrical issue can produce similar symptoms.
Ask whether diagnosis is included, whether the proposed motor is OEM or aftermarket, and how long parts and labor are covered. A manufacturer-approved or local repair provider may offer different part and warranty terms, so compare the written scope rather than choosing solely by the lowest total.
Clear the dryer’s surrounding area before the appointment and schedule standard service when the appliance can wait. Avoid paying for unrelated upgrades, and request approval before the technician adds parts beyond the estimate.
Accurate symptoms, model details, and an itemized quote help prevent unnecessary charges and repeat visits.