A Lopi gas stove typically costs about $3,000-$6,500 for the appliance, while a complete installation commonly totals $4,000-$9,000. Model size, venting, gas-line work, local labor rates, and finish choices drive the final quote; the figures below are U.S. planning estimates, not a manufacturer price sheet.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stove appliance | $3,000 | $4,600 | $6,500 | Freestanding models and common finish options |
| Installed project | $4,000 | $6,400 | $9,000 | Typical home, standard vent route |
| Venting materials | $500 | $1,000 | $1,800 | Depends on pipe length and termination |
| Installation labor | $700 | $1,300 | $2,500 | More if gas or vent routing is difficult |
What a Lopi gas stove costs by model and installation scope
For budgeting, allow roughly $3,000-$4,500 for an entry or smaller freestanding Lopi gas stove and about $4,500-$6,500 for larger or more feature-rich configurations. Dealer pricing can vary by region, finish, options, and current inventory, so a written quote is more reliable than treating a model name as a fixed retail price.
A standard replacement in a home with a usable gas connection and compatible vent route may land near $4,000-$6,500 installed. A new installation involving a gas-line extension, wall or roof penetration, or finish repairs can reach $7,000-$9,000 or more. Assumptions: U.S. dealer purchase, standard residential installation, ordinary access, and no major structural work.
The appliance is usually the largest single charge, but venting and site preparation can add thousands.
How appliance, venting, and labor charges shape the quote
Ask the dealer to separate the stove, vent system, installation, gas work, and any finishing charges. The table gives common planning ranges; bundled quotes may group several tasks under one installation fee.
| Quote item | Typical range | Unit or scope | What changes the price |
|---|---|---|---|
| Stove and options | $3,000-$6,500 | Per appliance | Model, finish, controls, accessories |
| Direct-vent materials | $500-$1,800 | Per vent system | Run length, elbows, termination |
| Installation labor | $700-$2,500 | Per project | Removal, access, routing complexity |
| Gas-line work | $250-$1,200 | Per job | Distance, pipe size, shutoff changes |
| Removal and disposal | $150-$500 | Per old unit | Weight, stairs, disposal requirements |
Labor estimates often reflect a two-person crew for part of the day, plus setup and testing. A rough labor calculation is 6-12 crew-hours at about $75-$150 per technician-hour, with contractor minimums and travel sometimes billed separately.
Itemized quotes make it easier to spot a low appliance price paired with costly installation extras.
Which vent length, gas run, and stove size raise the price?
Venting is a major variable. A short, straightforward run may use $500-$900 in materials, while a longer route with several elbows, a higher termination point, or difficult access can push materials toward $1,800 and labor higher. Confirm that the proposed vent layout matches the model’s installation requirements.
Gas-line distance also matters. A nearby connection may need only a shutoff or short extension; a run over 20-30 feet, an undersized existing line, or work through finished walls can add several hundred dollars or more. A larger stove may also require checking that the available gas supply and room layout meet specifications.
Chimney conversion, masonry changes, or moving the appliance to another wall can add $500-$2,500 or more, depending on the work. Before comparing quotes, verify that each includes the same stove, vent route, gas capacity check, and finish work.
Do regional labor rates change a Lopi stove quote?
Yes. In high-cost metro areas and regions with fewer qualified installers, labor and service charges can run about 10%-25% above a typical national planning estimate. Rural markets may have lower hourly rates but higher travel fees or fewer dealers, which can reduce the apparent savings.
Cold-weather demand can also affect scheduling and availability. In peak heating season, an installer may charge a rush or service premium, or offer a later installation date. A quote taken in spring or summer may be easier to compare, although appliance promotions and stock levels vary by dealer.
Compare at least two local installed quotes, including travel, delivery, and permit charges where applicable.
What three installed Lopi stove quotes might include
These examples show how scope changes the total; they are illustrative estimates, not guaranteed dealer offers.
| Scenario | Included work | Estimated total |
|---|---|---|
| Existing stove replacement | $3,600 appliance, short vent connection, 6 crew-hours, old-unit removal | $4,800-$5,600 |
| New installation on an exterior wall | $4,700 appliance, 8-foot vent route, gas shutoff, 10 crew-hours | $6,200-$7,500 |
| Long vent and gas-line routing | $5,600 appliance, 20-foot vent route, 25-foot gas run, finish repairs | $7,800-$10,000 |
Totals depend on local pricing and whether finish carpentry, electrical work, or permits are included. A low total is comparable only when the quote covers the same equipment and completed work.
When do removal, permits, or wall repairs add fees?
Replacing an existing stove can keep costs down if the vent and gas connection are compatible, but installers may still charge $150-$500 to remove and dispose of the old appliance. New wall or roof penetrations, drywall repair, tile work, or repainting are often separate from the basic stove installation.
Permit requirements differ by city and project scope. A straightforward swap may not trigger the same review as a new gas line or vent opening; fees and inspection charges can range from about $50-$400 where required. The installer should identify who obtains permits and whether inspections are included in the estimate.
Confirm disposal, patching, permit fees, and inspection visits in writing before accepting the price.
How can buyers lower the price without cutting safety?
Keep the stove near an existing approved gas connection and vent location when possible. Avoid relocating it or adding decorative construction unless those changes are necessary. A standard finish and essential controls may cost less than optional accessories, while the correct model size can prevent paying for capacity the room does not need.
Request quotes for the same model and installation scope from multiple authorized local dealers. Ask whether delivery, startup, vent materials, disposal, taxes, and warranty service are included. If an existing stove is failing, have a technician assess whether a repair is practical before committing to full replacement, but do not reuse venting or gas components without professional approval.
The safest savings usually come from simplifying the route and removing optional scope, not skipping required venting or code checks.