A Lopi Greenfield gas stove typically costs about $4,000-$6,000 for the appliance and $5,500-$9,500 installed, before unusual venting or construction work. The final price depends on the dealer, finish, vent route, gas-line access, local labor rates, and whether an existing stove must be removed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Greenfield gas stove | $4,000 | $5,000 | $6,000 | Appliance price; options and dealer pricing vary |
| Standard installation | $1,500 | $2,500 | $3,500 | Accessible gas connection and straightforward venting |
| Typical installed project | $5,500 | $7,500 | $9,500 | Stove, standard parts, labor, and ordinary setup |
| Complex installation | $9,000 | $12,000 | $16,000+ | Long vent, new gas line, construction, or code work |
What a Greenfield gas stove costs with standard installation
The Greenfield is a freestanding gas stove sold through specialty hearth dealers. A planning range for the stove itself is $4,000-$6,000; a typical buyer may see an appliance quote near $5,000 before delivery, tax, installation, or optional accessories. Actual dealer prices vary by market and product configuration, so the current written quote is more useful than a national list-price estimate.
For a straightforward replacement, budgeting $5,500-$9,500 installed is reasonable. That assumes a typical residential site, a nearby approved gas connection, a suitable vent route, standard installation materials, and no major framing or masonry changes. A new installation that needs a longer vent or a gas-line extension can exceed $10,000, especially in higher-cost metro areas.
Use $7,500 as a midrange planning figure, not as a guaranteed dealer price. Ask whether the quote includes the stove, freight, vent components, labor, permit fees, startup, and sales tax. Some dealers show an appliance-only amount first and add installation after a site inspection.
Assumptions: U.S. residential installation, standard finish, ordinary access, and no major structural or electrical work.
Which stove, vent, and labor charges appear on the quote
Dealer estimates often combine several trades and materials. Requesting itemized pricing makes it easier to spot omitted work, compare bids, and tell whether a lower appliance figure is offset by delivery or installation charges.
| Quote item | Low | Typical | High | What changes it |
|---|---|---|---|---|
| Stove | $4,000 | $5,000 | $6,000 | Dealer, configuration, finish, and options |
| Venting and termination | $400 | $900 | $2,000 | Vent type, length, elbows, and roof or wall exit |
| Installation labor | $700 | $1,300 | $2,500 | Site access, crew, vent work, and commissioning |
| Gas-line work | $0 | $500 | $1,800 | Existing connection, pipe length, and capacity |
| Delivery, removal, and disposal | $100 | $350 | $800 | Distance, stairs, and old-unit removal |
These are budgeting ranges, not a guarantee that every project will include each charge. Vent components may be quoted separately, while labor can include setup, connection, testing, and basic owner instructions. Ask whether wall thimbles, flashing, trim, hearth protection, and the outside termination cap are included.
The stove is only one part of the purchase; venting and site work can add several thousand dollars. General installation labor may work out to roughly $75-$150 per crew-hour, although hearth contractors commonly quote a fixed project price instead of hourly billing.
How vent length, gas capacity, and finish change the price
Venting is one of the largest variables. A short, direct route through an exterior wall may keep vent materials and labor near the lower end of the ranges. A route that rises through multiple floors or exits above the roof can require more pipe, supports, flashing, cutting, and weatherproofing. Each turn and the vent configuration must follow the stove’s installation instructions; the least expensive route is not automatically an approved one.
Gas supply is another site-specific cost. If the existing line can deliver the appliance’s required input at the needed pressure, connection work may be limited. If the line is undersized, shared with other high-demand appliances, or far from the stove, a plumber may need to extend or upgrade it. A short accessible extension might cost $250-$700; longer or concealed work can reach $800-$1,800 or more.
Confirm the exact Greenfield model and configuration on the quote. Gas type, required venting parts, control package, and selected finish can affect compatibility and price. A premium finish or dealer-installed accessory may add roughly $100-$600, depending on the option. The stove’s stated heat output and installation clearances should be checked against the room and proposed location, not assumed from the name alone.
Before comparing prices, verify that every bid specifies the same model, gas type, vent route, and included options. A quote for the stove alone is not comparable to a turnkey quote with a new vent, connection, delivery, and startup.
How much labor and vent installation usually take
A basic replacement can often be completed in about 4-8 hours by a two-person crew when the vent and gas connection are already suitable. A first-time installation commonly takes 1-2 days, with additional time possible for roof work, a long vent run, gas piping, or repairs to the wall or hearth. Crew size and schedule depend on the contractor and site.
Labor charges can rise when workers must carry the stove up stairs, protect finished floors, remove a heavy old appliance, or work in a confined area. A second trade may be necessary if a licensed plumber or electrician handles a portion of the installation. Ask whether the dealer’s installation fee includes those subcontractors and who coordinates inspections.
Labor estimates often fall around $700-$2,500 for installation, excluding the appliance. A simple connection and startup may be near the lower end; a new vent route and gas piping can push labor toward the top. A site visit is important because photos do not always show framing, clearances, existing vent condition, or gas-line size.
Get the labor scope in writing, including removal, vent assembly, connection, leak testing, startup, and cleanup. Clarify whether return visits for an inspection or correction are included, and whether the stated labor warranty covers both installation workmanship and service calls.
Why Greenfield installation quotes differ by U.S. region
Labor and delivery rates vary across the country. In lower-cost rural markets, a straightforward installation may run about 5%-15% below a national midrange, while major coastal cities and high-cost metros can be 15%-30% higher. These differences reflect contractor rates, travel, local permitting, and competition; they do not guarantee a particular quote in any state.
Remote locations can have higher freight or service-call charges even when local hourly wages are lower. In dense urban areas, parking, elevator reservations, limited access, and disposal rules may add time and fees. Roof work in snowy or rainy climates can also require schedule changes or extra safety measures, while local rules may require inspections before the appliance is used.
Rather than applying a regional percentage blindly, compare two or three local bids with matching scopes. Request a separate line for travel, delivery, permits, tax, and disposal. If one quote is more than 20% below the others, check for omitted venting, an appliance-only price, or excluded gas-line work before treating it as a bargain.
Local labor and access can move the total more than a small difference in the stove’s selling price. A dealer who has inspected the installation site can usually give a more dependable total than a remote estimate based only on a model number.
Three Greenfield project budgets with different scopes
The examples below show how the same stove can produce different totals. They are illustrative U.S. estimates, not dealer offers, and exclude sales tax unless noted. Exact vent components and labor must be confirmed for the home.
| Project | Scope and unit pricing | Estimated total |
|---|---|---|
| Existing-stove replacement | $4,700 stove; $450 vent parts; 6 crew-hours at $125-$150 per hour; $200 removal | $6,100-$6,250 |
| New wall-vent installation | $5,000 stove; 10-15 ft of vent at about $45-$90 per ft; $400-$700 gas work; one-day labor | $7,300-$9,000 |
| Roof exit and extended gas line | $5,500 stove; 20-30 ft vent at about $50-$100 per ft; $1,000-$1,800 gas work; added roof labor | $10,000-$14,000 |
Line-item rates in these examples are planning assumptions; dealers may price vent kits as packages rather than by the foot. The roof-exit project may also need flashing, ceiling or wall access, and repairs after installation. A quote should identify what finish work is included and who is responsible for any necessary patching.
Use the examples to compare scope, not to predict an exact invoice. If the site needs a hearth extension, electrical outlet, framing changes, or a substantial gas upgrade, request a separate allowance instead of assuming it is included.
What delivery, old-stove removal, and permits can add
Delivery commonly adds about $100-$350 within a dealer’s regular service area. Remote delivery, stairs, limited access, or a second trip can raise that charge to $400-$800. Removal and disposal of an existing stove may cost $100-$500, depending on its weight, access, and whether the contractor must disconnect or haul away related vent components.
Permit and inspection charges depend on local rules and the scope of work. A simple mechanical or fuel-gas permit may cost roughly $50-$300, while combined permits or additional inspections can exceed $500. Some dealers include permit handling in their labor price; others list fees separately. The homeowner should verify local requirements with the contractor or building department before work begins.
Electrical work may be needed if the selected setup requires a nearby outlet and none is available. A convenient existing outlet keeps the expense low; a new circuit or concealed wiring can add several hundred dollars or more. Similarly, correcting a damaged wall, hearth, or chimney area is generally separate from standard appliance installation.
Confirm removal, permit handling, delivery, and cleanup line by line. These charges are easy to overlook when comparing an appliance price with an installed package.
How to lower the Greenfield price without cutting required work
Keep the scope close to the stove’s standard installation requirements. Choosing a practical vent route, using an existing approved gas connection, and avoiding unnecessary wall or hearth remodeling can reduce labor and materials. Do not shorten, reroute, or substitute vent components without confirming they are approved for the exact stove configuration.
Ask the dealer whether standard finishes and included accessories meet the household’s needs before adding decorative options. A nonessential accessory might add $100-$600, and multiple upgrades can make a noticeable difference. Compare the same model and options across local dealers, and evaluate the installed total rather than only the advertised appliance price.
Prepare the room by clearing a safe access path and moving small furniture before the crew arrives. Agree in advance on who moves heavy items and who handles old-stove disposal. If an existing unit and vent are in good condition, ask whether any components can legally and safely remain; never assume reuse is acceptable without the installer’s inspection and approval.
Save money by trimming optional scope, not by skipping gas checks, approved venting, or required inspections. A low bid that excludes code-compliant vent materials or safe commissioning can lead to added charges later. Ask each bidder to identify exclusions, warranty coverage, payment timing, and the price for likely change orders.