Love That Door prices depend on the door style, dimensions, materials, hardware, and installation scope; a current, standardized U.S. price list is not available to confirm. As a budgeting benchmark, a basic interior door replacement commonly totals $250-$800, while a custom or premium door with installation can reach $1,000-$3,500 or more.
The ranges below are estimates for comparable U.S. door projects, not a verified quote from Love That Door. Local labor rates, measurements, finish choices, and whether the existing frame can be reused make the largest difference.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Basic interior door replacement | $250 | $550 | $800 | Door, standard hardware, and straightforward installation |
| Prehung interior door | $400 | $850 | $1,400 | Includes frame replacement and trim work |
| Custom or premium interior door | $900 | $1,800 | $3,500+ | Special dimensions, wood species, glass, or finish can raise price |
| Exterior entry door replacement | $900 | $2,200 | $5,000+ | Insulated steel or fiberglass; custom wood may cost more |
| Door slab only | $100 | $350 | $1,200+ | Price varies by material, size, and design |
What a Love That Door project may cost
For a standard interior door opening, a practical budget is $250-$800 for a basic slab replacement and $400-$1,400 for a prehung unit that includes a new frame. More elaborate doors, such as solid hardwood, glass-panel, oversized, or made-to-order designs, may bring the installed total to $900-$3,500 or higher.
Those figures reflect common U.S. market pricing for comparable products and work. They do not establish what a specific Love That Door product or service charges. A written quote should identify the exact door model, dimensions, finish, hardware, delivery, installation, and any removal or trim work.
For a typical 30-by-80-inch interior opening with standard access, expect roughly $400-$850 for a midrange installed door. A slab-only swap can cost less when the existing jamb is square, in good condition, and compatible with the replacement door.
Assumptions: U.S. pricing for ordinary residential work, standard opening, midrange materials, and no major framing or electrical changes.
How door, labor, and trim charges build up
A door quote may combine the unit price with installation, hardware, delivery, and disposal. For a prehung door, the frame is part of the product; installation normally requires removing the old unit, fitting and leveling the new frame, and adjusting the door. A slab replacement reuses the frame but may require hinge mortising or trimming.
| Quote component | Typical price | What changes the charge | Common pricing basis |
|---|---|---|---|
| Basic interior door slab | $100-$450 | Hollow core, solid core, wood, or molded panel | Per door |
| Prehung door unit | $200-$900 | Frame, material, panels, and factory finish | Per opening |
| Installation labor | $150-$500 | Frame condition, alignment, trim, and access | Per door |
| Hardware and lockset | $25-$250 | Basic passage set versus decorative or keyed hardware | Per set |
| Trim and finish work | $50-$300 | New casing, patching, caulk, and paint or stain | Per opening |
| Removal and disposal | $30-$150 | Old door weight, local disposal fees, and haul distance | Per door |
Labor is often quoted as a flat amount per opening, though hourly billing may apply to repairs or unusual work. A rough estimating formula is . At $60-$110 per hour, a straightforward 2-4-hour installation represents $120-$440 in labor before materials and any minimum service charge.
Check whether the estimate includes casing, painting, disposal, and hardware; an apparently lower door price may exclude these necessary items. Sales tax, delivery, and contractor overhead may also be separate line items.
Which dimensions and materials move the estimate
Standard dimensions generally cost less than special-order sizes. Many interior doors are about 28-36 inches wide and 80 inches tall, but older homes, closets, and remodels can have nonstandard openings. A custom-sized slab or prehung unit may add $100-$600 or more and can extend the lead time.
Material changes both purchase price and function. Hollow-core molded doors are usually the least expensive interior option. Solid-core doors cost more but reduce sound transmission and feel heavier. Solid wood, specialty veneer, glass inserts, and custom paint or stain typically raise material and finishing costs.
- Hollow-core interior: about $100-$300 for a slab; useful for basic rooms where sound control is not a priority.
- Solid-core interior: about $200-$700 for a slab; heavier construction may require careful hinge and frame adjustment.
- Solid wood or custom design: about $500-$2,000+ for the door alone, depending on species, joinery, glass, and finish.
- Exterior insulated door: about $400-$2,000 for a standard unit before installation; decorative glass, sidelights, and custom sizing can raise the total substantially.
Door type also matters. A pocket, barn, or bifold door may require track hardware or wall alterations, while a standard hinged door can use a conventional frame. For example, a new pocket-door opening may cost $800-$2,500 installed when wall work is needed, rather than the price of a simple door swap.
A door outside common stock dimensions or an opening that needs reframing can shift the quote by hundreds of dollars. Confirm the rough-opening measurement, slab thickness, swing direction, and jamb depth before ordering.
When does a replacement need more than installation?
Hidden or additional work often explains why two quotes for the same-looking door differ. A replacement may uncover a damaged jamb, soft subfloor, out-of-square opening, or old trim that cannot be reused. Exterior doors can require weatherstripping, threshold adjustment, flashing, and insulation to prevent drafts or water entry.
Typical added charges include $75-$300 for minor frame repair, $100-$400 for substantial casing replacement, and $100-$500 for painting or finishing a door and trim. These are broad estimates; matching old profiles, repairing plaster, or refinishing adjacent surfaces can exceed them.
For exterior installations, ask whether the quote covers removal, disposal, threshold, weather seal, and sealing around the frame. A standard replacement that uses the existing opening may be far less expensive than changing the opening size or adding sidelights. Structural changes, rot repair, or water damage should be itemized before work begins.
Request separate prices for the door, installation, frame repairs, finish work, and disposal so optional work is not confused with the base installation. A written scope helps compare quotes fairly.
How regional labor rates change door prices
Door material prices can be similar across many markets, but labor and delivery vary. In high-cost metro areas, installation labor may run 15%-35% above a national midrange estimate. Rural areas may have lower hourly rates but higher travel fees, limited installer availability, or longer delivery times for special orders.
As a broad comparison, straightforward interior installation may fall around $150-$300 per opening in lower-cost markets, $200-$400 in many mid-cost markets, and $300-$600 in expensive urban areas. These figures cover labor estimates, not the door itself, and are not fixed regional price lists. Exterior work and custom carpentry can exceed these bands.
Ask local contractors to price the same specifications: door type, size, material, finish, hardware, frame condition, and removal. Comparing a slab-only price with a complete installed price can create a misleading regional comparison.
Use local written bids for the final budget, especially when the home is in a high-cost city or the installer must travel to a remote property. Local code and building conditions can also affect exterior-door work.
Three installed door quotes with different scopes
These examples show how scope changes the total. They are illustrative U.S. estimates, not Love That Door offers or guaranteed prices.
| Example | Door and scope | Labor and extras | Estimated total |
|---|---|---|---|
| Basic bedroom swap | 30-by-80-inch hollow-core slab, $140-$240 | 2 hours at $60-$90 per hour; basic hinges and knob, $40-$90 | $300-$510 |
| Solid-core prehung unit | 32-by-80-inch unit, $350-$650 | 3-4 hours at $70-$110 per hour; casing and disposal, $100-$250 | $660-$1,340 |
| Custom exterior entry door | Insulated door with decorative glass, $1,200-$2,600 | 5-8 hours at $80-$125 per hour; removal, seal, and trim, $200-$600 | $1,800-$4,200 |
The first example assumes the jamb is reusable and the slab can be fitted without extensive alteration. The second includes a new frame and moderate trim work. The exterior example assumes a standard-sized opening; custom dimensions, sidelights, rot, or extensive finishing can increase the price.
When reviewing a quote, compare the total for the same door specification and included tasks, not just the listed price of the door. Confirm whether tax and delivery are included.
Ways to lower the price without compromising fit
Keeping a sound existing frame can reduce labor and material costs, but it is not a good saving if the jamb is warped, damaged, or incompatible with the new slab. Have the installer check the opening before buying. A prehung unit is often a better choice when the old frame is badly out of square or has damage.
Selecting a stock size, standard panel style, and factory-primed finish can avoid custom-order and finishing charges. For interior rooms, hollow-core doors cost less than solid-core models; use solid core where sound control or a heavier feel is important rather than upgrading every opening automatically.
- Group several doors in one visit to reduce repeated travel or minimum service charges.
- Keep existing casing if it is intact and matches the new frame.
- Choose standard hinges and hardware unless a specific finish or security feature is needed.
- Handle simple room clearing and furniture moving before the crew arrives, if the contractor allows it.
- Get at least three itemized quotes with the same sizes, materials, and finish requirements.
Do not skip accurate measurements or weather sealing on an exterior door to save money. Incorrect dimensions can lead to return fees or rework, while inadequate sealing can contribute to drafts and moisture damage. Ask whether the contractor charges for measuring or a site visit; diagnostic or estimate fees may be credited toward installation.
The safest savings usually come from choosing a stock design and controlling finish and trim scope, not from cutting measurement or installation quality.
Questions to ask before accepting a door estimate
Because Love That Door pricing cannot be confirmed from a standard public price list here, buyers should request a current, written quote from the seller or installer. Ask for the model number, material, dimensions, finish, lead time, and warranty terms. Confirm whether the quoted product is a slab, prehung unit, or complete exterior assembly.
For installation, ask who measures, whether the existing frame will be reused, and what happens if the opening is damaged or out of square. Request separate amounts for labor, hardware, delivery, removal, disposal, casing, painting, and taxes. Confirm whether any minimum charge applies and whether a deposit is refundable if a custom order cannot be installed as planned.
If the estimate includes a special order, verify the handing, swing direction, hinge placement, jamb depth, and rough-opening size in writing. These details can affect both fit and return eligibility. For an exterior door, check the included threshold, weatherstripping, and sealing method.
A complete quote should make clear what is being supplied, what work is included, and which possible repairs would cost extra. Comparing that scope with the price ranges above gives a more useful check than relying on a brand name alone.