Homeowners typically pay for Lp SmartSide by the square foot, with total project prices affected by siding thickness, profile, installation labor, and regional labor rates. The cost per square foot can vary widely based on material grade, trim, and whether the project includes removing old siding. This article lays out realistic price ranges for the exact question of Lp SmartSide cost per square foot and related project components.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Siding material (LP SmartSide engineered wood siding) | $2.50 | $4.75 | $7.50 | Per sq ft installed, standard warp-resistant panel |
| Installation labor (per sq ft) | $1.50 | $2.75 | $4.25 | Includes nailing, sealing, and flashing |
| Hardware & accessories (per sq ft) | $0.25 | $0.80 | $1.50 | Siding nails, flashing, caulk, sealant |
| Surface prep/removal of old siding (per sq ft) | $0.50 | $1.25 | $2.50 | Dependent on existing siding type and condition |
| Exterior trim & corners (per linear ft) | $6 | $12 | $20 | Includes factory-matched trim pieces |
| Project waste disposal (per sq ft) | $0.10 | $0.40 | $0.90 | Dump fees and haul-away |
Cost Breakdown by Major Components for LP SmartSide
Typical total price for a standard 1,500 sq ft home often runs from $10,000 to $26,000. The most common price drivers are siding thickness, panel profile (shiplap-style vs. lap), and the scope of prep work. A typical midrange project uses 7/16 inch or 11/16 inch panels, with weather-resistant trim and standard flashing. Assumptions: Midwest region, standard access, midrange installation crew, normal weather, standard moisture barrier.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Siding material | $3,000 | $7,125 | $11,250 | Per sq ft installed includes fasteners |
| Labor | $2,250 | $4,125 | $6,750 | Crew of 2-3 for typical home |
| Trim & corners | $900 | $2,250 | $3,600 | Perimeter-based pricing |
| Decking, wrap, and flashing | $350 | $900 | $1,800 | |
| Disposal & cleanup | $150 | $420 | $900 | |
| Permits & inspections | $0 | $350 | $900 |
Which Price Drivers Most Affect LP SmartSide Quotes
The square footage of siding is the dominant driver, followed by trim complexity and old-siding removal. Projects with intricate corners or multiple window bays boost material waste and labor hours. Additionally, tougher access or gated properties can push costs higher, especially in dense urban areas where crew time and equipment mobility matter.
Variables That Can Shift the Final Quote Significantly
Panel profile and thickness impact both material cost and required fasteners. Assumptions: 1,500 sq ft home, standard two-story, no hard-to-reach areas.
Existing siding removal complexity can change the price by 20-40% if old siding is fiber cement or heavy vinyl. Distance from the contractor’s shop and site access also affects truck time and setup fees.
| Scenario | Estimated Impact on Total | Notes |
|---|---|---|
| 1,500 sq ft, 7/16″ panels, standard trim | Average range | Baseline scenario |
| Old siding removal required | +$2,000 to $6,000 | Depends on material and condition |
| Hard-to-reach second-story sections | +$800 to $2,000 | Elevated access issues |
| Regional labor rate spike (coastal city) | +$1,000 to $4,000 | Based on local market |
Concrete Strategies to Trim LP SmartSide Costs
Choose standard profiles and avoid premium trim packages to lower price. Scheduling work in mild seasons can reduce labor surcharges, and bundling with a minor exterior update may unlock bulk-material discounts. If replacement is not needed, repairing damaged sections rather than full-siding replacement can substantially reduce costs.
Region-Based Price Variations You Should Expect
Coastal markets tend to have higher labor costs than Inland markets. In the Northeast, expect higher disposal and permit fees, while the Midwest often offers more competitive install rates. Rural areas may present travel-time add-ons but lower overall labor rates.
| Region | Low per sq ft | Average per sq ft | High per sq ft | Notes |
|---|---|---|---|---|
| Northeast | $3.75 | $5.75 | $8.25 | Higher labor and permits |
| Midwest | $2.75 | $4.75 | $7.00 | Standard pricing, good value |
| Southeast | $3.00 | $5.00 | $7.50 | Weather considerations |
| West | $3.25 | $5.25 | $8.00 |
Labor Time and Crew Size You Can Budget For
Average project durations range from 3 to 8 days for 1,500 sq ft homes. Most jobs use a crew of 2-3 installers, with two-person teams finishing faster on simple elevations and a third person helping with trim and clean-up.
Typical hourly rate range: $55-$95 per hour per crew member.
Material Substitutes to Compare Against LP SmartSide
Engineered wood like LP SmartSide competes with fiber cement and vinyl siding. Fiber cement often costs more upfront but may offer longer lifespan in some climates. Vinyl is cheaper but may drive higher maintenance costs over time. When comparing, include required nails, sealants, and flashings to avoid underestimating the total price.
Three Real-World Quote Scenarios You Can Compare
-
1,400 sq ft home, 7/16″ LP SmartSide with basic trim, no old siding removal
Item Low Average High Notes Material $3,720 $5,880 $9,120 Labor $2,460 $3,360 $5,520 Trim & corners $720 $1,440 $2,400 Disposal $120 $360 $720 -
1,500 sq ft, LP SmartSide with old siding removal, two-story
Item Low Average High Notes Material $5,100 $7,875 $12,000 Labor $3,000 $5,000 $8,000 Removal $1,000 $3,500 $6,000 Permits $0 $350 $900 -
1,600 sq ft corner lot with premium trim and color-matched joints
Item Low Average High Notes Material $6,000 $9,600 $14,000 Labor $3,200 $5,200 $8,000 Trim & corners $1,200 $2,400 $4,200 Color-match joints $300 $700 $1,200
Cost-Control Moves That Don’t Sacrifice Quality
Bundle LP SmartSide with a single-color palette and standard trim to reduce materials complexity. Schedule during off-peak seasons to avoid premium labor surcharges. For older homes, consider repairing and reusing existing flashing where feasible, and insist on accurate measurements to minimize waste. When quoting, compare at least two contractors and request itemized line items to see where costs diverge.