A Makita jack hammer costs about $400-$2,100 new, depending on model, weight, and impact strength; the average purchase is roughly $900-$1,100. Buyers should also budget for bits, delivery, taxes, or rental if the tool is needed for only a short job.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Compact demolition hammer | $400 | $525 | $700 | About 11-15 lb; tool only |
| Mid-size breaker | $700 | $900 | $1,150 | About 25-30 lb; heavier demolition |
| Heavy electric breaker | $1,400 | $1,750 | $2,100 | About 70 lb; slabs and roadwork |
| Rental | $70 | $100 | $150 | Typical daily rate; bit and deposit may cost extra |
Makita jack hammer prices by model and impact class
Compact models such as the HM0870C are suited to tile, concrete chipping, and controlled interior work. New tool-only prices commonly fall around $400-$700. The mid-size HM1214C class costs about $700-$1,150 and balances demolition power with a more manageable carry weight. The 70-pound HM1812 heavy breaker typically runs $1,400-$2,100.
For most homeowners and small contractors, a mid-size Makita demolition hammer is the practical price and power midpoint. Prices vary with retailer, stock, included accessories, and whether the listing is for a bare tool or a kit. Assumptions: U.S. new-tool retail pricing, standard warranty, before sales tax.
What the Makita breaker quote includes beyond the tool
Retail prices may cover only the hammer, while a job-ready purchase can require compatible bits and transport. Check the chuck or bit-retention system before buying: accessories for one Makita model may not fit another. The following ranges are typical budget allowances, not guaranteed add-on prices.
| Purchase component | Typical price | What changes the charge | Budget note |
|---|---|---|---|
| Hammer tool | $400-$2,100 | Weight, power, model | Largest expense |
| Point or flat bit | $25-$100 each | Length, shank, brand | Confirm fit before ordering |
| Cart or handling | $40-$180 | Tool weight and distance | More relevant for 70-lb units |
| Repair or service allowance | $50-$250 | Wear, damage, and service need | Not usually included in retail price |
| Sales tax | About $0-$200 | Local rate and purchase price | Added at checkout where applicable |
Bit compatibility and delivery can make a lower advertised price less economical. Professional tool repair is separate from routine cleaning and may exceed the allowance if the motor, cord, or impact mechanism needs substantial work.
How weight and concrete thickness change the price
Tool size is a meaningful price driver. A roughly 11-pound hammer is easier to control for chipping and lighter work, but it is slower on thick, reinforced concrete. Around 25-30 pounds, a breaker can handle more demanding floors and foundations. A 70-pound unit is intended for sustained heavy demolition and usually requires two-person handling or a suitable cart.
Concrete thickness and reinforcement also affect job time. Breaking a 4-inch unreinforced slab is a different task from cutting through a 6-inch reinforced slab. Choose by material and work duration, not just the lowest sticker price. Oversizing adds purchase and handling costs; undersizing can increase labor and wear.
New Makita versus used and rental breakers
A used compact Makita may list for about $200-$450, a mid-size unit for $400-$800, and a heavy breaker for $800-$1,500. Condition matters: inspect the cord, housing, vibration-control parts, bit holder, and operating test. A low price may not include a working bit or any meaningful warranty.
Daily rental commonly costs $70-$150, with weekly rates often around $250-$500. A deposit, damage waiver, delivery, or bit charge can raise the invoice. Rental usually costs less for a one-day job, while purchase becomes more competitive with repeated use. For labor, a simple estimate is ; contractor labor commonly runs about $50-$100 per hour, excluding possible minimum charges.
How long a concrete-breaking job can take
A small chipping task may take 1-3 tool hours, while a larger slab can require a full day or more, depending on thickness, access, and debris removal. A crew may spend additional time protecting nearby surfaces, moving the breaker, and loading concrete. Electric models also need a suitable power source and cord management.
Estimate labor from the full work sequence, not hammer-on time alone. If a contractor quote includes demolition, hauling, and cleanup, compare those items separately with a tool-only rental or purchase budget. Disposal fees may be charged by load, weight, or local transfer-station rules.
Regional price differences for Makita demolition hammers
Retail prices can be relatively similar across the country, but local inventory and delivery change the final amount. Large metro areas may run roughly 5%-15% above a national online price for in-stock equipment or same-day availability. Rural buyers may face 5%-20% more for freight or limited dealer choice, particularly on a 70-pound breaker.
Compare the delivered, taxed total rather than the displayed tool price. Regional differences are not fixed: promotions, stock shortages, and local sales tax can outweigh the typical location premium. Heavy models are more sensitive to freight charges than compact tools.
When Makita bits, carts, and power setup add cost
Plan roughly $25-$100 for a compatible point or chisel bit, and about $40-$180 for a heavy-duty cart if transport is difficult. Replacement bits can be useful for switching between breaking and edge work, but buying several before confirming the shank type can waste money. Extension cords and electrical work, if needed, are separate expenses.
Verify the model number and bit connection before adding accessories to the cart. For heavy breakers, delivery or a cart may be more practical than repeated lifting. If the site has restricted access or stairs, ask the seller or rental counter about handling requirements and return logistics.
Cut the Makita jack hammer budget without losing useful power
Match the hammer to the material and expected hours, then compare two or three quotes for the same model, included bit, warranty, and delivery terms. For a single short project, check weekly rental pricing before purchasing; for recurring work, compare the tool cost against expected rental days over a year.
Buying used can reduce the upfront price, but a documented operating test is more valuable than a small discount. Avoid paying for a heavy breaker when a compact model can do the task, and avoid choosing a weak unit for thick reinforced concrete that will prolong the job. The lowest-cost option is the one that completes the actual scope without unnecessary capacity or repeated rental charges.