A Marquis Hollywood Elite hot tub typically costs about $14,000-$20,000 before delivery, site preparation, and electrical work; a complete installation can bring the total to roughly $15,500-$24,000. The final quote depends on dealer package, included accessories, local labor, access to the backyard, and whether the installation needs a new 240-volt circuit or a concrete pad.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Hollywood Elite spa | $14,000 | $17,000 | $20,000 | New unit; dealer pricing and included options vary |
| Delivery and placement | $300 | $700 | $1,500 | Higher for crane access or difficult placement |
| Electrical circuit | $800 | $1,500 | $3,000 | Assumes a 240-volt installation |
| Base and site preparation | $400 | $1,000 | $2,500 | Level pad, minor grading, or reinforced base |
| Installed project total | $15,500 | $20,200 | $24,000 | Before unusual construction or premium upgrades |
What a Hollywood Elite hot tub usually costs
For a new Marquis Hollywood Elite, a practical planning range is $14,000-$20,000 for the spa itself, with many standard dealer quotes landing near $17,000. The model is a large, premium hot tub, so its price is above many entry-level spas. A dealer may quote a package rather than a bare unit, and the package can include a cover, steps, start-up chemicals, delivery, or a warranty extension.
Budget about $20,000 for a typical installed purchase, not just the advertised spa price. A straightforward project with a prepared pad and nearby electrical service may stay near $15,500-$18,500 all in. A complicated delivery route, new electrical work, or site construction can push the total above $24,000.
Pricing is not a fixed national MSRP. Marquis dealers set local offers, and the exact model year, trim, finish, control package, and inventory status affect the quote. If the Hollywood Elite is being sold as remaining inventory or a used unit, condition and included equipment matter more than a new-spa estimate. Ask the seller to identify the model year and list the items included in writing.
Assumptions: U.S. dealer purchase, new spa, standard cover, normal access, and no major landscaping or structural work.
How the spa, wiring, and delivery shape the quote
A spa quote combines the unit with services that are sometimes billed separately. Comparing only the headline price can make one dealer appear cheaper even when another includes delivery, a cover lifter, steps, or installation coordination. The ranges below are project-planning estimates, not fixed manufacturer charges.
| Quote item | Typical price | Pricing basis | What changes the charge |
|---|---|---|---|
| Hollywood Elite spa | $14,000-$20,000 | Per unit | Dealer, year, package, and options |
| Delivery and placement | $300-$1,500 | Per delivery | Distance, access, crew, or crane |
| 240-volt electrical work | $800-$3,000 | Per circuit | Panel capacity, cable run, trenching, and disconnect |
| Pad or base preparation | $400-$2,500 | Per site | Concrete, pavers, grading, and reinforcement |
| Steps, lifter, and starter supplies | $250-$1,000 | Per package | Accessory quality and dealer bundle |
Labor is often embedded in delivery and installation charges, but separately hired electricians commonly charge about $75-$125 per hour. A simple circuit may take 6-10 hours, while a long cable route, panel upgrade, or trench can require more time and materials.
Check whether the quote includes a spa disconnect, permit, inspection, final connection, and startup. Some dealers coordinate these tasks; others deliver the spa but leave electrical work and inspections to the buyer. A low delivery fee may cover curbside drop-off rather than moving the tub into its final position.
Get a line-item quote that separates the spa, delivery, electrical work, base, and accessories. That breakdown makes it easier to compare offers and spot charges that could appear after the order is placed.
Which electrical and site details raise the price?
The biggest installation variables are often the distance from the electrical panel and the route from the delivery truck to the pad. A short, accessible cable run is less expensive than a circuit crossing a finished basement or requiring a long outdoor trench. Existing panel capacity also matters; an electrician may need to add capacity or replace equipment before installing the spa circuit.
For planning, a cable run under about 25 feet with an adequately sized panel may fall near the lower end of the $800-$3,000 electrical range. Runs of 50 feet or more, buried conduit, difficult access, or panel work can add hundreds to several thousand dollars. Electrical requirements must be confirmed against the specific spa manual and local code; an electrician should verify the circuit size and protection rather than relying on a general estimate.
The base needs to be level and able to support the filled spa and occupants. A sound existing concrete slab may need little or no work, while a new reinforced pad or grading can cost $1,000-$2,500. Soft soil, a sloped yard, drainage concerns, or a location requiring retaining work can take the project beyond that range. Have the dealer confirm the required footprint and access clearances before construction.
Delivery access is another measurable cost driver. If a spa can be moved by a delivery crew through a clear 36-inch or wider path, standard placement may be possible. Narrow gates, stairs, overhead obstructions, or a route around the house may require additional labor or a crane. Crane service can add roughly $500-$2,000 or more depending on lift distance, permits, and local equipment availability.
Confirm panel capacity, cable distance, pad dimensions, and gate width before accepting a final quote. Those details help convert a broad estimate into a site-specific price and reduce the risk of a delivery-day surcharge.
How can buyers lower the Hollywood Elite price?
Ask the dealer to quote the same configuration with and without accessories. A cover lifter, steps, upgraded lighting, or bundled water-care kit may be convenient, but buyers can compare each item against its standalone price and decide what is necessary at purchase. Avoid paying twice for accessories already included in a package.
Keep the installation location close to the electrical panel when practical. A shorter route can reduce cable, conduit, trenching, and labor charges, provided the chosen location still meets access, drainage, and service-clearance requirements. Reusing a stable, correctly sized pad may also avoid new concrete work. The dealer or installer should approve the surface before delivery.
Request at least three written dealer quotes for the same model year and package. Ask each dealer to state whether the price includes sales tax, delivery to the final pad, startup, cover, warranty, and removal of packaging. Compare the total out-the-door price rather than a promotional monthly payment or the spa-only number.
Timing can help when a dealer is clearing floor models or older inventory, but verify that the unit is new, undamaged, and covered by the expected warranty. A discount of several hundred dollars may not be worthwhile if delivery or electrical work is excluded. Avoid cutting costs on a suitable base, code-compliant wiring, or safe placement.
The most dependable savings come from controlling the site work and comparing identical dealer packages. Buyers should not assume a cheaper model with a different configuration is directly comparable to the Hollywood Elite.
What do three realistic Hollywood Elite quotes look like?
These examples show how the same spa can produce different project totals. Each assumes a new Hollywood Elite priced within the usual dealer range; actual prices depend on region, model year, and written package details.
| Scenario | Spa and package | Site and labor | Estimated total |
|---|---|---|---|
| Prepared patio | $15,000-$16,500 | $300-$600 delivery; $800-$1,200 electrical; minimal base work | $16,100-$18,700 |
| Typical backyard install | $16,000-$18,000 | $500-$900 delivery; $1,200-$2,000 electrical; $700-$1,500 pad work | $18,400-$22,400 |
| Long cable run and crane | $17,000-$20,000 | $1,000-$2,000 placement; $2,000-$3,500 electrical; $1,000-$2,500 site work | $21,000-$28,000 |
In the prepared-patio example, the existing surface is level and the panel is close enough for a relatively straightforward circuit. The midrange scenario allows for ordinary new electrical work and limited pad preparation. The high-scope scenario includes extra access and construction costs, so it can exceed the usual $24,000 installed planning ceiling.
Use the scope details, not the scenario label, to judge whether a quote is comparable. A crane or panel upgrade can explain a higher total, but the contractor should identify the work and provide a written estimate before it begins.
How much do delivery and installation take?
Delivery and final placement may take a few hours when the route is clear and the pad is ready. Scheduling can take longer than the physical work, particularly when electrical work must be completed before delivery or a crane needs separate coordination. A standard electrical installation may take 6-10 labor hours; complicated cable routing, trenching, or panel upgrades can extend the job across more than one visit.
Ask the dealer whether delivery includes moving the spa to the prepared base, positioning it, removing packaging, and coordinating the electrician. Some quotes include only transportation and placement. If the spa cannot pass through the planned route, the buyer may need to arrange a crane or revise the location, both of which can add cost and delay.
Electrical work should be completed and inspected as required before the spa is energized. Permit costs vary by municipality, commonly around $50-$300 for a residential electrical permit, although local fees and inspection requirements differ. A contractor should confirm who applies for the permit and whether the fee is included in the proposal.
Have the pad and access route ready before the delivery date is scheduled. This prevents a failed delivery attempt, extra handling charges, or a costly last-minute change to the installation plan.
Do U.S. regions change the dealer price?
Local labor and delivery markets can shift the total noticeably. In high-cost coastal metros and dense urban areas, contractor rates and access constraints may put installed project costs about 10%-20% above a comparable midrange estimate. Smaller cities and rural markets can be closer to the national planning range, though long delivery distances or fewer available installers may offset lower hourly rates.
Climate and seasonal demand also influence scheduling and offers. In colder regions, demand can rise before winter, while spring and summer may bring more installation bookings. A dealer clearing inventory during a slower period may offer a better spa price, but electrician availability and freight costs remain separate. In hot-weather markets, busy outdoor-living seasons can also constrain delivery slots.
Request local quotes rather than applying a national percentage mechanically. A quote from a nearby dealer may include delivery and startup, while a distant seller might charge separately for freight, placement, or service. Verify that a dealer can provide warranty service in the installation area before choosing a lower price from outside the local market.
Regional comparisons are most useful when the quoted scope and service coverage match. Compare the same model year, accessories, delivery destination, electrical assumptions, and warranty terms across dealers.
What will ownership add to the Hollywood Elite price?
Purchase price is only part of the long-term budget. Electricity use depends on climate, insulation condition, water temperature, cover quality, and how often the spa is used. A reasonable planning allowance is about $25-$80 per month, or $300-$960 a year, though extreme weather, high utility rates, and frequent use can raise the bill. A properly fitted cover and sensible temperature settings help control heat loss.
Water-care supplies commonly cost about $20-$60 per month depending on the sanitizing system, water replacement schedule, and local supply prices. Filters require periodic cleaning and eventual replacement; budget roughly $50-$150 per year for routine filter upkeep, with costs varying by part and maintenance practices. These estimates do not include repairs or a professional service plan.
Ask what the manufacturer warranty covers and how long coverage lasts for the shell, plumbing, equipment, and labor. Warranty terms can differ by model year, seller, and installation conditions. A warranty extension or service plan may add several hundred dollars or more; compare its duration, exclusions, labor coverage, and service-call terms with the cost of paying for repairs as needed.
A practical annual operating allowance is roughly $600-$1,700 before major repairs. The lower end assumes moderate utility costs and routine care; colder weather, heavier use, or paid maintenance can raise ownership expense.
Should buyers repair a used spa or pay for a new one?
A used Hollywood Elite can cost substantially less than a new unit, but the purchase price does not reveal the condition of pumps, heater, control system, shell, or plumbing. Local listings may range from about $2,000-$8,000 for older or used spas, with delivery and installation often adding $1,000-$4,000. A unit sold cheaply may need repairs or be difficult to move.
Professional diagnostic visits commonly run about $100-$250, before parts and repair labor. A pump or heater repair may cost several hundred dollars; multiple failed components, leaks, or control-board problems can push repairs above $1,500. Obtain a written inspection estimate and confirm that the spa can be powered and tested before purchase whenever possible.
Moving an empty used spa is not the same as moving a new dealer unit. The buyer may need to arrange a specialized mover, confirm dimensions and weight, and coordinate reconnection. A seller’s low price can lose its advantage if crane placement, new wiring, or a replacement cover is needed. Confirm the exact model and age because parts and warranty eligibility may differ.
A used unit is financially attractive only when its condition, moving costs, and required repairs are documented. Compare its full installed cost with a new dealer quote that includes a valid warranty and service support.