Prices for Marvin and Andersen windows vary by size, system type, and finish. This article compares typical cost ranges, per-unit pricing, and common drivers to help buyers plan a budget for a standard replacement project.
Assumptions: Midwest labor rates, standard 3/0 x 5/0 double-hung units, Vinyl or wood-clad finishes, standard installation in a single-story home.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Typical per-window price (Marvin) | $900 | $1,400 | $2,200 | Includes unit and standard finish |
| Typical per-window price (Andersen) | $1,000 | $1,500 | $2,400 | Includes unit and standard finish |
| Total project cost for 6 windows (Marvin) | $5,400 | $8,400 | $13,200 | Assumes standard installation and pro labor |
| Total project cost for 6 windows (Andersen) | $6,000 | $9,000 | $14,400 | Assumes standard installation and pro labor |
| Delivery and disposal | $40 | $120 | $300 | Per project, varies by distance |
Marvin vs Andersen: Typical Replacement Window Price by Brand
Prices usually range from $900 to $1,400 per unit for Marvin and $1,000 to $1,500 per unit for Andersen. Higher-cost options reflect extended framing, premium finishes, or enhanced energy performance.
Major Cost Components in a Marvin vs Andersen Quote
Quotes break out into four to six parts, with materials and labor dominating.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (window unit) | $800 | $1,200 | $2,100 | Frame, sash, glass, hardware |
| Labor (installation) | $350 | $750 | $1,400 | Per window, 2-4 hours |
| Trim and finishing | $50 | $150 | $350 | Interior/exterior finishing |
| Delivery/Haul-away | $20 | $60 | $150 | Local transport and disposal |
| Permits and inspections | $0 | $75 | $300 | Depends on local rules |
| Warranty and overhead | $30 | $100 | $250 | Typically included in price |
Key drivers that shift the final Marvin vs Andersen price
Size and system type have the largest impact: 3/0 x 5/0 units cost less than 4/0 x 6/0 units, and vinyl-clad frames are cheaper than wood-clad or fiberglass options.
Impact of frame materials on cost for premium models
Aluminum-clad and fiberglass options command higher prices than standard vinyl or basic wood, with per-window uplifts of roughly 200 to 500 dollars in typical markets.
Region and market: how location changes the price
Prices vary by regional labor rates and supply chain factors; coastal markets tend to price higher than rural areas for comparable units.
Labor time and crew size for a standard replacement job
A typical crew of 2-3 installers completes 6 windows in 1-2 days, influencing total labor costs by $600-$1,400.
Upgrade options that raise price: Energy, glass, and hardware
Low-E glass, gas fills, and impact-rated glass add $100-$400 per window depending on the brand and performance level.
Regional price contrast: urban versus suburban markets
Urban replacements usually incur higher labor and permit costs, adding $50-$200 per window versus suburban installs.
Practical quotes: sample project scenarios
Scenario A: 6 standard double-hung windows, vinyl/clad, Midwest, no upgrades. A Marvin package might land in the $5,400-$8,400 range; Andersen could run $6,000-$9,000, excluding permits.
How to reduce Marvin vs Andersen costs without sacrificing essential quality
Scope control and timing can trim costs: consolidate installations, choose standard finishes, and compare bundled quotes rather than single-unit bids.
Per-unit comparison: unit costs by size and finish
Smaller 3/0 x 5/0 vinyl units run around $900-$1,100 for Marvin and $1,000-$1,200 for Andersen; larger 4/0 x 6/0 fiberglass can exceed $2,000 per unit.
Final budgeting tips for a Marvin vs Andersen project
Plan for a 10-15% contingency to cover permits, delivery, and unanticipated installation tasks.