A Masonite Livingston door typically costs about $100-$350 for the door alone, while a supplied and installed interior door commonly totals $250-$700. The final price depends on whether the purchase is a slab or prehung unit, door size and core, local availability, hardware, and the work needed to fit the opening.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door slab | $100 | $190 | $350 | Door only; finish and core affect price |
| Prehung unit | $180 | $300 | $500 | Door mounted in a frame, before installation |
| Hardware and supplies | $25 | $65 | $150 | Basic passage set, hinges, shims, and trim supplies |
| Installed interior door | $250 | $425 | $700 | Typical opening with standard access and limited repair |
What a Livingston Door Costs as a Slab or Prehung Unit
Masonite Livingston is a molded interior door style, but exact configurations, sizes, and stock vary by retailer. A basic hollow-core slab in a common size may run $100-$200; a prehung hollow-core unit is often $180-$350. Solid-core versions, when offered in the desired configuration, can reach $250-$500 for the unit before installation.
For a standard 30-by-80-inch interior opening, budgeting $250-$500 installed is reasonable when the frame is sound and the door needs only routine fitting. A wider, taller, solid-core, or less readily available configuration can push the total toward $700 or more. These are planning ranges, not a guaranteed price for every Livingston model.
A slab is the door panel alone and generally costs less, but it must match the existing opening, hinge locations, and latch preparation. A prehung unit includes the frame and hinges, making it a more complete purchase but requiring removal and replacement of the jamb. Retail listings may show unfinished, primed, or different core options, so the displayed price should be checked against the exact specification.
Assumptions: U.S. pricing for a common interior size, standard white-primed molded panel construction, ordinary access, and no major wall or frame repairs.
How Door Materials, Labor, and Trim Shape the Quote
A quote may combine the door, hardware, installation labor, and any work needed to remove or adjust the existing unit. The following ranges apply to one interior door and can vary with market, product availability, and the condition of the opening.
| Quote item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Livingston slab or prehung unit | $100 | $250 | $500 | Panel only at the low end; upgraded or prehung unit at the high end |
| Labor | $100 | $200 | $400 | Hang or replace one door, with standard fitting |
| Hardware and installation supplies | $25 | $65 | $150 | Knob or lever, fasteners, shims, and minor supplies |
| Trim, removal, and disposal | $0 | $60 | $175 | Reuse trim at low end; replacement or disposal adds cost |
| Overhead or minimum service charge | $0 | $50 | $150 | May apply to a one-door visit or small job |
Labor and opening condition often matter as much as the door’s retail price. A contractor may quote a minimum visit charge rather than a strictly per-door rate, especially for one replacement. Ask whether the estimate includes removal, disposal, hardware, painting, and casing, since these items are frequently treated as separate work.
For labor planning, a straightforward replacement can take about 2-4 hours, while a prehung installation or an opening needing adjustment may take 4-6 hours. A typical carpenter or door installer may charge around $50-$100 per hour, though local service minimums can make the effective rate higher.
Which Size, Core, and Opening Conditions Raise the Price?
Door dimensions are a major cost driver because standard stock is generally easier to source and fit than a nonstandard size. Common interior widths include 24, 28, 30, and 32 inches, usually at 80 inches tall. A special order, a 36-inch width, or a taller panel can add roughly $40-$150 to the door price, depending on configuration and retailer.
Core type changes both purchase price and handling. Hollow-core doors are lighter and typically less expensive. Solid-core units may cost $75-$200 more than a comparable hollow-core model and can require two people to handle safely. A heavier door can also need stronger hinges or adjustments to an older frame.
A standard-sized door in a square, undamaged opening is usually the least expensive installation scenario. A frame that is out of square by more than about 1/4 inch, a damaged jamb, or flooring that interferes with door clearance can add $75-$250 in adjustment or repair work. Replacing casing on both sides may add another $100-$300, depending on the material and paint work.
Finish can affect the delivered price as well. A primed door may be ready for on-site paint, while a factory-finished option, if available in the selected Livingston configuration, can cost more. Confirm whether the quote includes painting: a painter may charge $75-$200 per door for preparation and finish coats, with higher rates for detailed color matching or extensive repairs.
What Do Installers Charge for a Livingston Door?
For a simple slab swap, installation labor commonly falls around $100-$250 when the existing jamb is reusable and hinge locations align. Hanging a prehung unit is more involved because the installer removes the old frame, sets the new jamb plumb and square, fastens it, and reinstalls or replaces trim. That labor often runs $200-$400 for one door, before extensive repair or painting.
Compare labor scope, not just the hourly rate. One estimate may include disposal and casing touch-ups, while another may cover only hanging the panel. A detailed quote should state whether the installer will cut the door to fit, bore the lockset, reuse hinges, protect floors, and haul away the old door.
Small jobs can be affected by minimum charges. A contractor’s minimum visit may be $150-$300 even if the hands-on work takes less than three hours. Installing several doors in one visit can reduce the average labor charge per opening, although the total bill rises with each door and any added prep.
If the slab is being reused with a new panel, accurate measurements are essential. The installer should verify height, width, thickness, hinge positions, and swing direction before ordering. A misordered slab or a panel needing extensive trimming can create extra labor or replacement expense.
How Regional Labor Rates Change the Installed Price
Local labor and delivery conditions can shift an installed price substantially. In lower-cost rural and small-city markets, a standard one-door installation may land near $250-$400. In many suburban markets, $300-$550 is a practical range. Higher-cost metro areas, including parts of the Northeast and West Coast, may reach $450-$800 for a comparable job.
Labor can be 15%-35% higher in expensive metro areas than in lower-cost markets. The difference is not simply the door itself: contractor insurance, travel time, parking, disposal fees, and service minimums can all raise the quote. Remote locations may also pay more for freight or special-order delivery if the exact size or core is not stocked locally.
These regional ranges assume one standard interior opening and routine work. A multi-door order can improve the per-door labor price, while an urgent single-door repair or a difficult building access situation can increase it. Online retail prices may exclude delivery, and store pickup may not be practical for a large or heavy unit.
For a useful comparison, request at least two written estimates using the same door dimensions, core type, hardware, trim, and disposal requirements. Ask whether tax and delivery are included. A lower quote that omits painting or frame repair may not be cheaper once the full scope is added.
Which Extra Charges Can Appear Beyond the Door Price?
Old-door removal and disposal may cost $25-$100, depending on local rules and whether the installer hauls the material away. Replacing casing can add $100-$300 per opening, while repairing a split jamb or damaged drywall may add $75-$250. Painting, if excluded from the installation quote, commonly adds $75-$200 for one door.
Confirm the complete installed scope before accepting a low door-only price. Hardware is another variable: a basic passage knob or lever may cost $15-$50, while a locking or decorative set can run $40-$150 or more. Hinge upgrades, door stops, and new strike plates can add $10-$60 per opening.
Delivery may be free with a qualifying local order or may add about $25-$100. Special-order freight can be higher, particularly for multiple units or locations outside normal delivery routes. Retailers may also charge restocking fees on incorrectly ordered or returned special-order doors, so verifying the handing, size, and core before purchase can prevent a costly mistake.
A single-door job can also trigger a contractor minimum even when materials are inexpensive. If several Livingston doors need replacement, asking for one combined estimate can reduce repeated travel and setup charges. The estimate should still list the per-door material price and labor scope so that the savings are transparent.
Three Livingston Door Quotes for Common Interior Jobs
The examples below illustrate how scope changes the total. They assume ordinary access and typical U.S. rates, and they are not quotes for a specific retailer or contractor.
| Job example | Materials and unit rate | Labor and scope | Estimated total |
|---|---|---|---|
| Slab swap, 28 by 80 inches | $150 slab; $45 hardware and supplies | 2.5 hours at $70 per hour; existing jamb and trim reused | $370-$450 |
| Prehung replacement, 30 by 80 inches | $280 unit; $60 hardware and supplies | 4 hours at $75 per hour; remove old frame and reset casing | $600-$750 |
| Solid-core prehung, 32 by 80 inches | $420 unit; $90 hardware and supplies | 5 hours at $85 per hour; minor jamb adjustment and disposal | $900-$1,100 |
The first example costs less because it preserves the existing frame and trim. The prehung examples include more labor, and the solid-core option costs more because of the heavier, higher-priced unit and additional fitting. Painting or extensive wall repair would be extra unless expressly included.
When comparing these scenarios with a real estimate, check whether the door is a Livingston model in the same panel layout and finish. Similar-looking molded doors can have different prices and may not share the same core, dimensions, or availability.
How Can Buyers Lower a Livingston Door Installation Bill?
Keeping a usable jamb and casing is usually the most direct way to limit labor. A slab replacement may be the better value when the existing frame is square, solid, and compatible with the new panel. A prehung unit is more appropriate when the jamb is damaged, but it adds removal, fitting, and trim work.
Choose the scope before choosing upgrades. Measure the opening and confirm a standard size before ordering; avoiding a special-order dimension may save $40-$150 and reduce delivery delays. A primed hollow-core option can also cost less than a solid-core or factory-finished door when sound control and extra durability are not required.
Prepare the work area by moving furniture and clearing both sides of the opening. This does not replace skilled fitting, but it can prevent billable setup time. If painting is needed, ask whether completing several doors together lowers the painter’s per-door charge; a consolidated visit may be more efficient than separate appointments.
Compare written quotes with the same product details and list of included tasks. Ask about the labor minimum, disposal fee, hardware allowance, and possible charges for an out-of-square opening. Avoid paying for a full frame replacement when a slab will fit properly, but do not force a slab into a damaged jamb simply to avoid a repair that will affect operation.