Mathews Brothers windows typically cost about $700-$1,600 per window installed, with an average near $1,100 for a standard replacement project. Final pricing depends on window size, series, glass and frame options, installation conditions, and local dealer rates; the manufacturer does not set one nationwide retail price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Standard replacement window, installed | $700 | $1,100 | $1,600 | Typical double-hung unit and straightforward opening |
| Window unit only | $400 | $800 | $1,250 | Size, series, glass, and dealer pricing change the quote |
| Installation labor | $250 | $450 | $750 | Per window; trim or opening repairs can add labor |
| Eight-window project | $5,600 | $8,800 | $12,800 | Assumes standard units and ordinary access |
What a Mathews Brothers replacement window usually costs
For a common double-hung replacement window, budget roughly $700-$1,600 installed. A compact, standard-size unit with basic glass and an uncomplicated insert installation may land near the low end. Larger units, upgraded glass, wood interiors, custom sizing, or full-frame replacement can push a quote above the average.
Window-only prices commonly fall around $400-$1,250 per unit before installation. This is a planning range, not a published fixed price: Mathews Brothers sells through dealers, and the selected series and local supplier determine the actual product quote. A full-frame installation may cost $1,000-$2,500 or more per opening when trim, flashing, or concealed damage needs attention.
For a typical eight-window replacement, a practical starting budget is about $5,600-$12,800 installed. That range assumes standard residential openings, no major structural repairs, and ordinary delivery conditions. Assumptions: U.S. pricing in USD, midrange materials, standard access, and installation by a qualified local contractor.
How units, labor, and trim appear in the quote
A written estimate should separate the window units from installation and job-specific charges. Ask whether the quoted product is a replacement insert or a full-frame unit, and confirm which glass, screens, interior finish, and exterior trim are included. These distinctions make competing bids easier to compare.
| Quote component | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Window unit | $400 | $800 | $1,250 | Each, standard-size model |
| Installation labor | $250 | $450 | $750 | Each opening, ordinary replacement |
| Interior or exterior trim work | $50 | $150 | $350 | Each opening, depending on finish scope |
| Removal and disposal | $25 | $60 | $125 | Each old window |
| Delivery or job setup | $75 | $200 | $500 | Per project, distance and order size matter |
Costs are not always charged as separate line items. A contractor may bundle removal, flashing, insulation, and trim into an installed rate, while another bid lists them individually. Verify whether sales tax, permit fees, lead-safe work, and cleanup are included before comparing totals.
Labor and finish work can add $325-$1,225 per opening beyond the unit price. At roughly 2-5 labor hours per standard opening and $75-$125 per hour for skilled work, installation time alone can account for $150-$625; crew minimums and travel may raise the charge.
Which frame, glass, and opening sizes raise the price?
Size is a major pricing driver because larger windows use more material and may need extra handling. A standard opening around 24 by 36 inches is generally less costly than a wide picture window over 60 inches, which can require a larger unit, additional support, or a two-person installation. Custom dimensions can also carry a manufacturing premium or longer lead time.
Glass options change both the unit price and the comfort performance. Double-pane insulating glass is common; low-emissivity coatings, gas fills, laminated glass, or specialty configurations can add roughly $50-$250 or more per window depending on the series and size. In cold climates, buyers may prioritize lower U-factor glass; in sunny regions, solar heat-gain performance may matter more.
Frame construction and interior finish also affect the quote. A simpler vinyl exterior or standard finish generally costs less than a wood interior, custom color, or upgraded hardware package. For planning, allow about 5%-20% above a basic unit price for selected premium finishes or options, but confirm with the dealer because combinations are product-specific.
Installation scope can outweigh the product upgrade. Insert replacement retains much of the existing frame, while full-frame work removes the old frame and may expose rot or water damage. If an opening needs sill repair, new flashing, or reframing, the added work can range from $150-$800 per opening, with extensive repairs potentially costing more.
Before approving a premium, compare the exact size, series, glass package, and installation method across bids. A low quote may omit trim or use a different glass configuration rather than represent a better price for the same Mathews Brothers window.
How Maine and other regions shift installation rates
Mathews Brothers is based in Maine, but buyers elsewhere should expect local labor and delivery to shape the installed price. In parts of the Northeast, labor and older-home detailing can put a comparable job about 5%-15% above a national midrange estimate. Long travel distances or delivery outside a dealer’s regular service area may add another $100-$500 per project.
In lower-cost rural markets, standard installations may run about 5%-10% below the midrange when access is easy and a crew can install several units in one visit. Major metro areas, including markets with higher wages and tighter parking or access, may come in 10%-25% higher. These are broad planning differences rather than fixed regional tariffs.
Climate and housing age affect specifications and labor. Drafty older homes may require careful measuring and trim work, while colder climates can motivate higher-performance glass. Coastal locations may need careful attention to water management and corrosion-resistant hardware, though the precise requirements depend on the site and product configuration.
Use local written bids as the final reference, not a national average alone. Request the same unit dimensions, glass package, finish, removal scope, and warranty terms from each dealer or installer to reveal whether a regional price difference reflects labor, product, or included work.
How many hours does a window crew need?
A straightforward insert replacement often takes about 2-4 hours per window for a small crew, including removal, setting, sealing, and basic trim adjustments. A full-frame installation typically takes 4-8 hours per opening, particularly when the installer must remove exterior trim, add flashing, or restore interior finishes.
A two-person crew may complete 6-10 standard insert replacements in one day if the openings are accessible and the units are ready. Custom windows, upper-floor access, lead-safe procedures, or repair work can reduce that pace. Contractors may also use a project minimum, so installing one window can cost more per unit than including it in a larger order.
Labor pricing often reflects more than the hours spent at the opening. Measurement, ordering coordination, setup, cleanup, insurance, and warranty responsibility are part of the contractor’s rate. Confirm whether the estimate includes interior caulking, exterior sealing, insulation, and disposal, especially when comparing a low hourly rate with a packaged installation price.
Bundling several openings usually reduces the labor cost per window when the work is similar. A crew can reuse setup time and complete repeated tasks efficiently, although a large project still needs adequate time for accurate installation and inspection.
Three realistic Mathews Brothers quote examples
The following examples illustrate how scope changes a budget; they are not dealer quotes. Actual prices depend on the selected Mathews Brothers series, measured openings, options, taxes, and local contractor pricing.
| Project | Units and scope | Estimated total | Estimated per window |
|---|---|---|---|
| Small bedroom update | 3 standard double-hung inserts; 3-4 hours per opening; basic trim | $2,400-$4,200 | $800-$1,400 |
| Whole-home replacement | 10 standard units; grouped installation; removal and disposal included | $7,500-$14,000 | $750-$1,400 |
| Large custom openings | 4 oversized or custom units; upgraded glass; full-frame work and trim | $6,000-$12,000 | $1,500-$3,000 |
A three-window project can have a higher per-unit rate because delivery, travel, and crew setup are spread across fewer openings. The whole-home example assumes repeatable standard sizes and normal access. The custom project includes more substantial labor and specialty sizing, so it should not be compared directly with an insert-only quote.
Check both the project total and the per-opening figure. A contractor may quote a lower unit rate but exclude disposal, trim, or repair allowances that appear elsewhere in a competing estimate.
Mathews Brothers versus repair or a lower-cost window
Repair can make financial sense when a frame is sound and the problem is limited to a lock, sash balance, weatherstripping, or localized seal failure. Minor hardware or weatherstripping work may cost about $100-$400 per window; more involved sash or glass repairs can run $250-$700. Repair pricing depends on part availability and whether the existing window can be serviced.
Replacement is more compelling when frames are deteriorated, units are difficult to operate, or several openings need repeated repairs. A lower-cost standard replacement window may save roughly $100-$400 per unit compared with a higher-option Mathews Brothers configuration, but compare frame material, glass performance, finish, warranty, and installation scope before treating the difference as savings.
Premium glass or finish upgrades should be selected for a specific need rather than added by default. A better glass package may be worthwhile for comfort or solar control, while decorative hardware or a custom color may add cost without solving a performance problem. Ask the dealer to price the base configuration and each option separately.
Repair is usually the cheaper route only when the frame and surrounding opening remain in good condition. If replacement is needed, compare equivalent specifications and installation methods rather than comparing a repair invoice with a premium full-frame project.
Ways to lower a Mathews Brothers window estimate
Keep dimensions and configurations consistent where practical. Standard sizes and repeated styles can simplify ordering and installation, while unusual shapes or one-off dimensions may raise the product price and complicate scheduling. Do not change an opening solely to reduce cost without checking structural, exterior, and finish implications.
Choose options selectively. Ask for separate prices for low-E glass, grids, custom colors, wood interiors, upgraded locks, and other selections. Retain options that address climate, appearance, or security requirements and remove upgrades that do not materially improve the intended use.
Prepare the work area before the crew arrives by moving furniture, clearing window access, and protecting nearby belongings. Confirm whether the homeowner or contractor handles blinds, alarms, and exterior obstacles. Preparation should not include disturbing lead paint or removing components the installer needs for a proper fit.
Request at least three itemized quotes using the same window schedule and work scope. Compare unit series, glass, measurement responsibility, installation method, flashing, trim, disposal, permits, and warranty. A quote that is substantially lower may omit a necessary task, so ask for clarification before selecting on price alone.
The clearest savings usually come from controlling options and comparing identical scopes, not skipping installation details. Scheduling several windows together can also spread delivery and setup costs, while postponing needed replacement may increase repair or damage expenses if water is entering the opening.