Prices for a Maytag service call in the United States typically include a diagnostic fee, travel or service call charge, and potential labor and parts costs. The total often depends on the appliance type, the issue, and whether any replacement parts are needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Service Call Charge | $60 | $90 | $130 | Flat fee to inspect the appliance. |
| Diagnostic Fee | $0 | $50 | $90 | Often waived if repair is completed on site. |
| Labor (Hourly) | $75 | $110 | $150 | Typically 1-2 hours for diagnosis and initial repair. |
| Parts (typical) | $10 | $60 | $300 | Depends on part type and availability. |
| Total Typical Job | $145 | $270 | $700 | Ranges include common fixes with standard parts. |
Common Maytag Service Call Price Snapshot for Appliances
Maytag service calls usually start with a base charge for the visit, then a diagnostic fee if the cause isn’t immediately obvious. A typical repair could run $150-$350 for small fixes where parts aren’t required, or $400-$800 or more when replacement parts and labor are needed for larger issues like a failing compressor or control board. Assumptions: standard residential home, midrange parts, Midwest-to-Sunbelt labor rates.
| Appliance Type | Low Total | Average Total | High Total | Notes |
|---|---|---|---|---|
| Washing Machine (top-load, basic fix) | $180 | $260 | $420 | May require belt or pump; parts vary. |
| Dryer (lint clog or drum glide) | $150 | $210 | $360 | Often resolved with minimal parts. |
| Dishwasher (sprayer motor or pump) | $200 | $320 | $520 | Labor plus typical dishwasher parts. |
| Refrigerator (control board, defrost) | $250 | $420 | $750 | Higher due to refrigerant-safe handling rules. |
Major cost components in a Maytag service quote include the service call charge, diagnostic time, labor, and the replacement parts. A typical table of costs shows how each part adds to the total. Assumptions: standard residential service, single-site visit, normal access.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Service Call | $60 | $90 | $130 | Flat fee before any work. |
| Labor | $75 | $110 | $150 | 1-2 hours typical for diagnosis and initial repair. |
| Parts | $10 | $60 | $300 | Depends on model and failure. |
| Permits/Disposal | $0 | $0-$25 | $50 | Rare for standard home repairs. |
| Delivery/Return | $0 | $15 | $40 | Small accessories or control boards. |
Issue severity and part availability are the two biggest price levers. A simple hose swap may cost far less than a failed compressor. Assumptions: common failure modes, in-stock replacement parts; regional labor rates vary.
- Severity: minor fault (drum off-center) vs. major fault (compressor or sealed system).
- Part availability: in-stock parts reduce wait times and price, special-order parts can add 1-2 weeks and higher shipping costs.
- System type: through-wall vs. freestanding units can affect access and labor time.
- Location: urban areas with higher labor rates tend to push totals higher.
Scope control and timing help manage the final price. If the issue is not dangerous, ask the technician for a diagnostic only when the diagnostic fee is separate. Assumptions: you compare repair vs. replacement path, standard service windows.
- Ask for a written quote after initial inspection to avoid scope creep.
- Request parts pricing before authorization to proceed with repairs.
- Bundle services if multiple appliances need attention in the same visit.
- Consider repair vs. replacement when a major component fails and costs approach half the price of a new unit.
Additional fees may include expedited service, after-hours rates, or diagnostic-only charges if no repair is performed. Assumptions: standard regional rates, no emergency work.
- Rush or after-hours fees: common in urgent situations, higher hourly rates.
- Diagnostic-only charges: some shops waive the fee if a repair is authorized and completed on site.
- Trip charges for long distances: a per-mile or flat-load cost may apply beyond a set radius.
Three example quotes show typical ranges with scope and labor hours. Quotes vary by model and local labor costs. Assumptions: one-site visit, standard parts; Midwest region baseline.
- Washing Machine Top-Load, belt and pump fix: Service Call $75, Diagnostic $0, Labor $110 (1.2 hours), Parts $40, Total $225.
- Dishwasher Pump Replacement: Service Call $85, Diagnostic $60, Labor $120 (1.5 hours), Parts $120, Total $385.
- Refrigerator Control Board Replacement: Service Call $90, Diagnostic $70, Labor $140 (1.8 hours), Parts $250, Total $550.
Prices vary by region due to labor markets and parts access. A midwest city might show totals 10-15% lower than a coastal metro. Assumptions: similar model year, standard parts quality, equal access.
| Region | Service Call | Labor Rate | Typical Total Range | Notes |
|---|---|---|---|---|
| Midwest | $60-$90 | $95-$125/hr | $180-$320 | Common, steady demand. |
| Southwest | $65-$110 | $100-$140/hr | $210-$420 | Higher travel costs in remote areas. |
| Northeast | $70-$120 | $110-$150/hr | $230-$580 | Higher living costs impact pricing. |