This article outlines typical costs buyers pay for Menards composite decking, including exact price ranges, per-unit rates, and key drivers that affect the total. The goal is to help shoppers estimate a realistic budget for a Menards-based deck project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Deck board cost (6-6.5 inch wide) | $1.80 | $3.50 | $6.50 | Per linear foot; varies by profile and color |
| Substructure (framing lumber) | $1.20 | $2.50 | $4.00 | Pressure-treated pine or equivalent |
| Labor to install decking (per sq ft) | $8.00 | $15.00 | $25.00 | Includes basic layout and fasteners |
| Fasteners and hidden clips | $0.25 | $0.75 | $2.00 | Per linear ft |
| Delivery/haul-away | $50 | $150 | $350 | Store pickup may reduce costs |
Assumptions: Midwest labor rates, standard 6- to 6.5-inch composite boards, typical 10×12 deck footprint, moderate slope, standard access.
Direct price range for Menards composite decking boards
Average total board-only cost for a small to mid-size project typically falls between $900 and $2,600 for 100–200 linear feet of decking. Low end reflects clearance or basic colors with minimal waste; high end accounts for premium colors, longer boards, or snazzy profile shapes.
Major cost components in a Menards deck project
The price split below shows where money goes in a typical deck using Menards materials. Materials cover boards, hidden fasteners, and edge trim. Labor accounts for crew time and basic site prep. Permits may apply in some jurisdictions. Delivery/Disposal covers haul-away of waste and transport from the store.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (boards + clips) | $600 | $1,400 | $2,800 | Depends on length, color, profile |
| Labor | $600 | $1,400 | $2,500 | Installed deck area in square feet |
| Delivery/Disposal | $50 | $150 | $350 | Local pickup may reduce |
| Permits | $0 | $100 | $600 | Region-dependent |
| Edge trim and accessories | $50 | $150 | $350 | Skirting, fascia, closing pieces |
Assumptions: 12×12 footprint, standard spacing, no custom underdeck lighting, typical suburban site.
Size, style, and substructure drive price
Deck length, width, and the chosen profile (solid board vs. hollow-core) affect both material and installation time. Perimeter length and joist spacing alter lumber needs and labor hours. A larger deck or a more intricate pattern (herringbone, alternating board directions) raises the per-square-foot cost.
Regional and labor factors shaping Menards deck pricing
Prices vary by region due to labor markets and availability. In higher-cost metro areas, expect the hourly labor range to trend toward the upper end. In rural locations, delivery fees and stock access can swing totals. Typical regional delta might be 10–25% between low-cost markets and large cities.
Per-foot and per-board pricing specifics
For planning, treat decking as both per-foot and per-board. A 6.5-inch wide board typically costs between $2.50 and $5.50 per linear foot at Menards, depending on color and grain. A common 12-foot board yields a higher total per board than multiple shorter pieces due to fewer seams. Edge trim and clips add roughly $0.50–$1.50 per linear foot of deck.
Comparing Menards decking value with other brands
When sizing up price, compare to other mid-tier composite brands. On a per-square-foot basis, Menards materials often come in the $2.50–$6.50 range for boards, with total installed costs that can run $12–$28 per sq ft including labor. Premium lines or longer warranties can push totals higher, while DIY-friendly kits may lower professional labor needs.
Ways to reduce Menards deck price without sacrificing quality
Cost-control strategies include selecting standard colorways, reducing waste through precise layout, bundling materials in a single purchase, and opting for delivery pickup. In-season installation can also lower labor fees in markets with flexible schedules. Consider replacing only worn boards rather than rebuilding full spans to cut total expense.
Add-ons, delivery, and service considerations for Menards decking
Delivery fees vary by distance and store availability. Some locations offer curbside pickup to save on handling. Hidden costs may include protective taping, moisture barriers, or railing components. For a final quote, request a line-item breakdown: materials, labor, delivery, waste disposal, and any required permits.