A Miele double oven setup typically costs about $9,000-$18,000 for two built-in ovens and professional installation, with premium steam or speed-oven combinations costing more. The final price depends on the two models, cabinet and electrical readiness, local labor, and whether the project includes removal or remodeling.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Two Miele ovens | $7,000 | $11,500 | $18,000+ | Two standard wall ovens; specialty models raise the total |
| Installation labor | $600 | $1,200 | $2,500+ | Assumes accessible, compatible cabinet and wiring |
| Removal and disposal | $100 | $250 | $500 | May be priced separately |
| Typical installed project | $8,000 | $13,000 | $22,000+ | Excludes major cabinetry or electrical changes |
What two Miele wall ovens typically cost
Miele does not necessarily sell a single, one-piece double-oven appliance in every U.S. market. Many double-oven installations use two separate built-in Miele units stacked in a tall cabinet. The total appliance price is therefore the sum of the selected models, not a standard double-oven package price.
For two conventional Miele wall ovens, a planning range is about $7,000-$14,000 before installation, or roughly $3,500-$7,000 per oven. A configuration combining a standard oven with a steam-combination or speed oven can run about $9,000-$18,000 or more. Exact pricing depends on the model, finish, controls, capacity, and current dealer inventory.
Budget around $11,500 for two ovens before installation when choosing midrange models. A matching pair is not always the least expensive or most practical arrangement; buyers should confirm that the units are designed to fit the same cabinet stack and that their finishes and controls coordinate.
Assumptions: U.S. dealer pricing estimates for two new built-in units, standard finishes, and no major cabinet or electrical renovation.
How oven, trim, and labor charges shape the quote
A written estimate should separate the appliance purchase from installation and site work. This makes it easier to spot whether a high total reflects premium oven models, substantial preparation, or both. Dealer delivery, haul-away, and installation may be bundled, so the quoted price should specify what is included.
| Quote item | Typical range | Pricing basis | What changes the charge |
|---|---|---|---|
| Two Miele ovens | $7,000-$18,000+ | $3,500-$9,000+ per unit | Oven type, features, and model tier |
| Installation labor | $600-$1,800 | $75-$150 per hour | Fit, wiring, access, and crew time |
| Trim or cabinet adjustments | $200-$1,500 | Per project | Opening dimensions and finish work |
| Electrical work | $250-$1,500 | Per circuit or project | Existing circuit capacity and distance |
| Delivery and disposal | $100-$500 | Per delivery or appliance | Stairs, distance, and haul-away |
| Permits or inspection | $0-$400 | Local fee | Jurisdiction and scope of electrical work |
Labor estimates assume a straightforward replacement where the cabinet opening and power supply already suit the chosen ovens. For example, 6-10 hours at $75-$150 per hour implies $450-$1,500 in labor before any separate delivery, materials, or contractor minimum charge.
Cabinet and electrical changes can add more than the oven installation itself. Ask whether the quote includes mounting, leveling, connection, testing, trim pieces, travel, and disposal, and request separate prices for any carpentry or wiring work.
Cabinet width, oven type, and voltage that change the price
Two stacked ovens need a cabinet designed for their combined height, weight, ventilation clearances, and installation instructions. A typical 30-inch-wide wall-oven cabinet is common, but width alone does not confirm compatibility. The installer should compare each model’s cutout width, height, and depth with the actual cabinet measurements before the order is finalized.
Oven type is a major price driver. Two conventional ovens generally cost less than a stack that includes a steam-combination or speed oven. Specialty cooking functions, larger capacities, premium controls, and coordinated design details can raise the appliance subtotal by several thousand dollars. A steam model may also require attention to water handling and the manufacturer’s installation requirements.
Electrical service matters as well. Many full-size wall ovens use a dedicated 240-volt circuit, but the required amperage varies by model. If the home has only one suitable circuit, adding a second circuit or upgrading a panel can add roughly $500-$2,000 or more, depending on the route, panel capacity, and local labor. A run longer than about 25 feet or access through finished walls can push wiring costs higher.
Confirm model-specific cutout dimensions and electrical requirements before buying either oven. A cabinet opening that needs several inches of modification, a weak floor support, or a circuit that cannot serve the selected appliance may turn a routine installation into a remodeling project.
Installation hours and cabinet work for a stacked pair
A like-for-like replacement can take about 4-8 labor hours when the existing cabinet is sound, both ovens fit, and the electrical connections are ready. A new stacked installation commonly takes 6-12 hours across appliance and trade work. Cabinet reconstruction, a new circuit, or difficult removal can stretch work across multiple visits.
Installers may charge by the hour, by the appliance, or at a flat project rate. A typical labor allowance of $600-$1,800 covers a relatively uncomplicated two-unit installation in many markets. A separate electrician or carpenter may charge $75-$150 per hour, with minimum visit fees often applying even to short tasks.
For an existing oven stack, removal can involve disconnecting and carefully extracting heavy appliances without damaging cabinetry or flooring. Expect about $100-$300 for basic removal and disposal, with higher charges for stairs, tight access, or special recycling requirements. If the old units are built into a cabinet that must be opened, demolition and repairs are separate line items.
Ask the installer to inspect the cabinet and electrical setup before scheduling delivery. A pre-install visit can identify clearance problems early and reduce the risk of a delivered oven sitting unused while a carpenter or electrician completes extra work.
Regional labor rates shift the installed Miele total
Appliance prices may be similar across states when purchased through comparable authorized dealers, but labor and remodeling rates vary. As a planning estimate, installation and related trade work may be 15%-30% above a national midpoint in high-cost metro areas such as parts of the Northeast and West Coast. Rural markets may be 10%-20% below that midpoint for labor, although travel charges or limited installer availability can offset the difference.
For a straightforward $1,200 labor estimate, a high-cost metro adjustment of 15%-30% would imply about $1,380-$1,560. A rural estimate 10%-20% lower would be about $960-$1,080 before travel or minimum charges. These percentages are budgeting comparisons, not guaranteed local rates; ZIP code, contractor workload, and cabinet scope can matter more than state averages.
Dealer delivery policies also affect the regional total. Some sellers include standard delivery, while others charge $100-$300 or more for inside placement, stairs, or a narrow access route. In remote areas, freight or a longer service trip may add several hundred dollars.
Compare installed quotes from local appliance dealers and licensed trades rather than comparing oven prices alone. Make sure each estimate covers the same models, delivery level, removal, installation tasks, and any required electrical or cabinet work.
Three realistic Miele double-oven quote examples
The examples below show how model selection and site readiness can produce very different totals. They are planning estimates, not fixed dealer offers, and exclude sales tax. Taxes vary by state and locality and can add several hundred dollars or more to an appliance purchase.
| Project | Appliance estimate | Labor and site work | Estimated total |
|---|---|---|---|
| Two conventional ovens, existing 30-inch cabinet and circuits | $8,000-$10,000 | $800-$1,500 | $8,800-$11,500 |
| Standard oven plus steam-combination unit, minor trim work | $10,000-$15,000 | $1,200-$2,500 | $11,200-$17,500 |
| Premium pair, new circuit and cabinet modifications | $14,000-$19,000+ | $2,500-$5,500+ | $16,500-$24,500+ |
In the first case, a crew might spend 6-8 hours on removal, fitting, connection, and testing. The second may require 8-12 hours, especially if trim or ventilation clearances need adjustment. The third can involve separate electrical and carpentry visits, so a single installation rate will not capture the full cost.
Use the installed total, not the advertised price of one oven, to compare quotes. Confirm that each bid lists both model numbers and states whether tax, delivery, haul-away, trim, electrical permits, and cabinet repairs are included.
Where to trim the Miele oven budget without compromising fit
Choose the pair around actual cooking needs rather than assuming that two top-tier units are necessary. A standard convection oven paired with a specialty steam or speed oven may cost less than two premium ovens while still providing different cooking functions. Compare the exact feature sets and sizes; do not assume that a lower-priced model will fit the same opening.
Keep the existing cabinet and wiring if they meet both manufacturers’ specifications. Before ordering, have an installer verify dimensions, support, ventilation clearances, and circuit capacity. Doing this can prevent rush carpentry, repeat delivery fees, or returns. If cabinet work is needed, ask whether a simple trim or opening adjustment is possible before authorizing a full cabinet replacement.
Request at least two itemized quotes using identical model numbers. Compare appliance price, delivery, installation, haul-away, and optional work separately. If the project is flexible, schedule it when local installers are less booked; this may improve availability, though it does not guarantee lower appliance pricing.
Avoid paying for upgrades that do not solve a real cooking or fit requirement. Do not omit required electrical work or manufacturer clearances to lower the initial bid, since an unsafe or noncompliant installation can create larger repair costs later.