The MK 470 tile saw typically costs about $100-$500 in the U.S., depending on whether it is used, new old stock, or bundled with accessories. Blade condition, shipping, included stand, and local availability can shift the out-the-door price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| MK 470 saw | $100 | $300 | $500 | Used, typical listing, or new old stock |
| Replacement 7-inch blade | $25 | $45 | $80 | Varies by blade type and quality |
| Shipping and handling | $0 | $35 | $100 | Local pickup can avoid this charge |
| Estimated purchase total | $125 | $380 | $680 | Before applicable sales tax |
What a complete MK 470 tile saw usually costs
For a working MK 470 with a serviceable blade and basic parts, a practical budget is $150-$350 used. New old-stock examples or well-kept saws with accessories may be advertised for $300-$500, but availability and condition matter because this is an older model.
The saw is a compact 7-inch wet tile saw intended for smaller tile jobs, rather than a large-format cutting system. A typical $300 purchase assumes a functioning pump, intact tray, usable fence, and ordinary local pickup. An advertised price may not include a stand, blade upgrade, freight, or sales tax.
Most buyers should plan on roughly $250-$400 for a ready-to-use saw after a basic blade or delivery allowance. Assumptions: U.S. resale market, normal condition, standard 7-inch blade, and no major repair.
Blade, pump, and shipping charges in the quote
The saw price is only part of the expense. A worn blade, missing water pump, damaged tray, or costly shipment can make a low listing less attractive than a higher-priced local saw that is ready to cut.
| Cost component | Low | Typical | High | What changes the price |
|---|---|---|---|---|
| Used saw and motor | $100 | $250 | $400 | Condition, completeness, and seller |
| 7-inch wet-cut blade | $25 | $45 | $80 | Tile type and blade grade |
| Pump or water-system repair | $15 | $40 | $90 | Replacement pump or fittings |
| Stand or basic accessories | $0 | $40 | $100 | Whether accessories are included |
| Shipping or delivery | $0 | $35 | $100 | Distance and carrier handling |
Sales tax is additional and depends on the buyer’s location. If a shop or contractor is hired to make cuts rather than sell the saw, labor is a separate service; rates often run $50-$100 per hour, with minimum charges possible.
Inspect the motor, water delivery, fence, tray, and included blade before comparing two asking prices.
How blade wear and included parts change the price
A clean, complete saw can justify a higher price than a unit needing repairs. Test the motor and pump if possible, and check that the blade turns without wobble. Look for cracks in the water tray, corrosion around electrical parts, missing guards, and a fence that will not hold alignment.
Blade cost depends on the material being cut. A basic 7-inch blade may cost $25-$45, while a better continuous-rim blade for porcelain can reach $50-$80. A blade that is dull, chipped, or unsuitable for the tile may require replacement immediately. If the pump does not move water, allow roughly $15-$90 for a compatible replacement or repair parts.
A missing pump or damaged tray can add more to the real cost than a modest difference in the seller’s price. Verify the saw’s exact configuration and parts availability before paying a premium for an older model.
Is a used MK 470 cheaper than new old stock?
Used units commonly fall around $100-$350, with the lower end typically reflecting wear, missing accessories, or uncertain operating condition. New old-stock units may be priced around $300-$500, but “new” does not necessarily mean recently manufactured or supported like a current model.
For a one-time project, a $100-$200 used saw can be economical if it runs correctly and includes a usable blade. For repeated work, a better-maintained unit may be worth paying $250-$350 for, especially if it avoids immediate pump, blade, or alignment costs. Compare the complete package rather than the label on the box.
Choose the used saw when it can be tested; pay extra for new old stock only when condition, included parts, and return terms are clear.
What three MK 470 purchase scenarios add up to
A local used saw with a worn blade might list for $125. Add a $40 replacement blade and $10 in small fittings, and the total is about $175 before tax. This is the lowest-cost scenario, but it depends on the motor and tray being sound.
A complete used saw listed at $275 with a working pump and adequate blade may cost about $310 after a $35 local delivery charge, before tax. A new old-stock unit priced at $425 with a $55 blade allowance and $70 freight reaches about $550 before tax.
These examples show why the advertised price alone can understate the amount needed to start cutting. Confirm whether the seller includes the blade, pump, fence, tray, and stand, and ask for a powered test or a clear return policy.
Why local availability and freight change the final price
Because the MK 470 is an older model, local resale supply can be more important than a national list price. In a large metro area, multiple used listings may keep prices near the lower or middle range. Rural buyers may face fewer options and pay $35-$100 to transport or ship a saw.
As a planning estimate, compare nearby asking prices with listings from other regions, then allow roughly 10%-25% more when freight, limited supply, or seller demand is involved. These are budgeting adjustments, not fixed regional premiums. Freight can be especially unattractive for a compact used saw if the unit is not packed securely.
Local pickup is often the simplest way to control cost and inspect an older saw before purchase.
How to lower the MK 470 budget without risking a bad buy
Set a maximum out-the-door price before contacting sellers. Separate the saw’s value from the cost of a blade, pump, delivery, and tax, and request photos of the motor label, tray, fence, and included accessories. A short test with water can reveal pump problems that a powered motor-only demonstration will miss.
Buy only the blade suited to the tile being cut; a premium porcelain blade may be unnecessary for occasional ceramic work. Avoid paying for accessories that are not needed for the planned job, but do not skip a safety guard or accept damaged electrical components. If repair parts and shipping push the total near the price of a complete unit, compare other saws before committing.
The most reliable savings come from buying a testable, complete local saw and pricing needed repairs before negotiation.