Neuma Doors do not have one fixed national price list; dealer quotes vary by model, glass, size, finish, and installation scope. A standard-size door may cost about $1,500-$4,000 for the unit, while a professionally installed entry door commonly totals $3,000-$7,500, with larger or impact-rated systems costing more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Standard Neuma door unit | $1,500 | $2,750 | $4,000 | Single, standard-size configuration |
| Installed single entry door | $3,000 | $5,000 | $7,500 | Unit, removal, and routine installation |
| Installed patio or multi-panel system | $5,000 | $9,000 | $16,000+ | Depends heavily on panel count and opening |
| Installation labor | $500 | $1,200 | $2,500 | Higher for structural or finish work |
| Impact-rated upgrade | $500 | $1,500 | $3,500+ | Added to comparable non-impact system |
What a Neuma entry door usually costs installed
For a typical 36-by-80-inch Neuma fiberglass entry door, a reasonable planning range is $3,000-$7,500 installed. The low end assumes a standard single door, uncomplicated removal, a modest glass package, and a straightforward replacement into a sound opening. The average project is about $5,000, including a mid-level door, hardware, labor, and basic trim adjustments.
Budget around $5,000 for a standard, professionally installed single entry door. This is an estimate, not a manufacturer-issued retail price list: Neuma products are generally quoted through dealers, and package contents differ. A decorative glass design, custom color, sidelights, unusual dimensions, or coastal impact requirements can push the total above $7,500.
Door-only prices are often less useful than installed quotes because a replacement may include delivery, removal, disposal, flashing, lock hardware, and interior or exterior finish work. Ask whether the quote includes the frame and threshold, or prices only a slab. A prehung unit with frame is not directly comparable to a slab-only price.
Assumptions: U.S. standard-size single door, mid-range configuration, ordinary access, and no major framing damage.
How the Neuma door quote divides between unit and labor
A complete estimate should separate the door package from installation and job-specific charges. The figures below are common budgeting ranges for a single replacement; contractor prices and dealer packages vary. Items such as disposal or finish carpentry may be bundled rather than listed separately.
| Quote component | Low | Typical | High | What changes the charge |
|---|---|---|---|---|
| Door, frame, and basic glass | $1,500 | $2,750 | $4,000 | Model, finish, glass, and size |
| Hardware and lockset | $100 | $300 | $700 | Handleset, multipoint lock, finish |
| Installation labor | $500 | $1,200 | $2,500 | Access, alignment, and finish scope |
| Removal and disposal | $100 | $250 | $500 | Old frame, heavy glass, haul distance |
| Trim, flashing, and supplies | $150 | $450 | $1,000 | Waterproofing and finish repairs |
| Permits or inspection | $0 | $100 | $400 | Local rules and project scope |
Door configuration and labor together usually account for most of the final price. Installation labor alone may run about $500-$1,200 for a routine replacement. A contractor may charge more when the opening needs reframing, the wall requires repair, or the job involves a large multi-panel assembly. For labor estimates, a useful comparison is , with many finish or door installers billing roughly $75-$125 per hour.
Which door sizes, glass options, and ratings raise the price?
Size is a major pricing variable. A standard single door is usually less expensive than a 42-inch-wide or extra-tall custom unit because the larger package may require special ordering and more difficult handling. A wider entry with sidelights can add several thousand dollars, while a multi-panel patio opening can move the project into the $5,000-$16,000-plus range installed.
Glass selection also changes the quote. A simple decorative or clear insulated glass package may be included in a base configuration, while elaborate privacy glass, grille patterns, or larger glazed areas can add approximately $200-$1,000 or more. Confirm the exact glass type and whether the quoted package is insulated, tempered where required, and suitable for the home’s exposure.
Ask for the model, dimensions, glass specification, and rating in writing before comparing totals. In hurricane-prone locations, an impact-rated door may add about $500-$3,500 or more over a comparable non-impact configuration, depending on size and testing requirements. Energy, wind-load, and local code specifications must match the opening and jurisdiction; a standard door is not automatically an acceptable substitute.
Finish choices, color, and hardware can add smaller but meaningful amounts. A factory-applied finish or premium handleset may raise the product price, while an unusual color or custom size can increase both lead time and freight. A quote should identify whether the price is for a stock configuration, a custom order, or a fully assembled prehung system.
Assumptions: Price changes are additions to a comparable standard-size single door, not guaranteed Neuma dealer surcharges.
Ways to lower a Neuma door replacement quote
Keeping the existing rough opening and choosing a standard size are among the most effective ways to control cost. Before ordering, have the installer verify opening width, height, jamb depth, swing, and threshold condition. An incorrect measurement can lead to a custom remake, restocking charge, or extra carpentry that erases any initial savings.
Spend on the specifications the opening actually needs, not on upgrades that do not solve a real requirement. Compare a standard glass and finish package with premium options, but do not remove necessary impact protection or code-compliant safety glass. If the existing frame is sound and the project allows a slab replacement, ask whether that option is practical; replacing only a slab may save roughly $500-$1,500 in labor and materials, but compatibility and weather sealing matter.
Get at least three itemized quotes using the same model and configuration. Check that each includes the frame, threshold, hardware, delivery, removal, flashing, trim, tax, and warranty terms. A low bid that omits finish repair or disposal may not be the lowest completed-project price. Scheduling the work during a contractor’s less busy period can improve availability, though discounts are not assured.
Homeowners can reduce billable time by clearing the entry area, arranging access, and deciding on hardware and finish details before the order is placed. They should not remove structural components or disturb exterior water barriers unless qualified; poor preparation can cause leaks or damage that cost more to correct.
How regional labor and delivery affect Neuma pricing
Local labor markets can move an installed quote substantially. In lower-cost rural or smaller-market areas, a routine installation may fall near the lower part of the national range. Large metro areas and regions with high insurance, permit, or contractor overhead can run roughly 10%-25% above a comparable project elsewhere. Coastal impact requirements can add product and inspection expenses beyond labor differences.
Compare local, like-for-like quotes rather than applying one national average to every city. Delivery can be more expensive when the dealer is far from the job, the door is oversized, or access requires special handling. Some quotes include freight in the door price; others list it separately, often around $100-$500 for a single door, with larger systems potentially costing more.
Permit charges depend on city and scope. A same-size replacement may be treated differently from widening an opening or changing structural supports. When permits are required, fees may range from about $50-$400 for a straightforward residential door project, while plan review or structural changes can raise the total. Buyers should ask the installer who obtains the permit and whether inspections are included.
Regional weather and building codes also affect the product selected. A coastal project may require a specific impact-tested configuration, while a cold-climate buyer may prioritize insulated glass and weather sealing. The correct comparison is not simply the cheapest door; it is the lowest quote that meets the home’s code, exposure, and installation requirements.
How long installation takes and what labor includes
A straightforward single-door replacement generally takes a two-person crew about 4-8 hours, including removal, setting the new unit, shimming, fastening, sealing, and basic trim work. Larger entry systems or jobs with delicate finishes may take a full day or longer. Reframing, siding repairs, or interior casing replacement can extend work to 1-3 days.
Labor costs rise when the opening needs repair, not just when the door itself is expensive. A routine crew charge may be $500-$1,200; complicated carpentry and finish restoration can bring labor and related work to $1,500-$2,500 or more. Ask whether the installer includes flashing, low-expansion foam or other suitable insulation, exterior sealant, threshold adjustment, and cleanup.
Installation quality affects water management and operation. The frame must be level, square, and securely anchored, and the flashing must direct water away from the wall. A door that sticks, leaks, or fails to latch may require adjustments or corrective work. Confirm the labor warranty, who handles callbacks, and whether the installer is authorized to service the product.
Scheduling can affect the calendar more than the actual work duration. Custom colors, glass, sizes, or impact-rated units may require a longer manufacturing and delivery window than stock configurations. The dealer should provide an estimated lead time and clarify how long the price remains valid, especially if freight or materials are subject to change.
Three realistic Neuma door project budgets
These examples illustrate how scope affects a quote; they are not fixed manufacturer prices. Product availability, dealer discounting, regional labor, and local code requirements can change the totals. Each example assumes a properly measured opening and no hidden water or structural damage.
| Project | Door and options | Labor and other work | Estimated total |
|---|---|---|---|
| Basic entry replacement | 36-by-80-inch standard unit, $1,800-$2,600 | 4-6 hours; $700-$1,200 labor, $200-$450 removal and supplies | $2,700-$4,500 |
| Decorative entry upgrade | Single door with upgraded glass and hardware, $2,800-$4,500 | 6-8 hours; $900-$1,500 labor, $300-$700 trim and disposal | $4,000-$6,700 |
| Impact-rated coastal entry | Rated single unit with upgraded glass, $3,500-$6,000 | 6-10 hours; $1,000-$1,800 labor, $150-$500 permit and handling | $4,700-$8,300 |
The scope and rating can matter more than the brand name alone. For a multi-panel patio door, request a separate estimate rather than extrapolating from a single-door example. Panel count, opening width, wall conditions, and equipment needed for handling can move the job into five figures.
When reviewing an estimate, check that the stated labor hours match the work described. A simple replacement should not be priced like a structural opening change without an explanation. Conversely, an unusually low figure may exclude tax, freight, finish repair, or code-required hardware. Ask the dealer to show the product configuration and the installer to state what is included in the fixed total.
What removal, frame repairs, and add-ons can add
Old-door removal and disposal commonly add $100-$500, depending on the frame, glass weight, haul distance, and local disposal charges. The amount can be higher when the door is oversized or difficult to remove without damaging adjacent finishes. Some contractors include this work in installation, so buyers should compare the scope rather than assume a separate line item is an extra charge.
Hidden damage is the most common reason a simple replacement quote grows after removal. Rot, water intrusion, damaged sheathing, or an out-of-square opening may require $300-$1,500 in repairs; extensive framing or exterior finish work can exceed $2,000. Request a written change-order process so additional work is approved before it proceeds.
Other possible additions include a new lockset, doorbell relocation, interior casing, exterior trim, paint, stain, and threshold or sill work. Hardware can range from about $100-$700, while finish carpentry and painting may add $200-$1,000 depending on the number of surfaces and local labor. These items are not necessarily required with every replacement.
Sales tax, delivery, and permit costs should be shown or clearly identified as excluded. Warranty coverage can differ between the door and installation labor, so the estimate should spell out who is responsible for adjustment or water-related concerns. A product warranty does not necessarily cover poor installation, and an installer warranty may be limited to workmanship.
Questions to ask before accepting a Neuma quote
Because there is no single published price that applies to every Neuma configuration, the most useful price list is an itemized quote tied to a model and opening. Buyers should request the written product name, dimensions, swing, frame type, finish, glass specification, hardware, and any impact or code rating. This prevents two dealers from pricing different packages under similar descriptions.
Confirm the complete installed total, including exclusions, before placing a custom order. Ask whether the quote includes removal, delivery, disposal, flashing, insulation, trim, tax, permits, and cleanup. Also ask how deposits and cancellations work, what happens if field measurements differ, and whether a custom product can be returned.
For a fair comparison, request separate figures for the door package, installation, and optional upgrades. Check the stated lead time, payment schedule, product warranty, labor warranty, and service contact. If one quote is substantially lower, ask whether it omits the prehung frame, premium glass, impact testing, or finish work rather than treating price alone as proof of savings.
Assumptions: All figures are planning estimates in U.S. dollars; actual dealer and installer quotes depend on product availability and site conditions.