Nieu cabinet doors typically cost about $50-$250 per door, with a common kitchen order totaling roughly $1,500-$4,500 before installation. Door size, style, finish, wood species, shipping, and whether the project includes drawer fronts or professional installation drive the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Single cabinet door | $50 | $125 | $250 | Estimated price for a standard-size replacement front |
| Drawer front | $40 | $90 | $180 | Size, style, and finish affect the price |
| 20-door kitchen order | $1,000 | $2,500 | $5,000 | Doors only, before shipping and installation |
| Professional installation | $500 | $1,200 | $2,500 | Typical labor allowance for a kitchen refresh |
Assumptions: U.S. pricing estimates for standard custom-sized fronts, a typical kitchen, and no cabinet-box replacement. Confirm current product pricing and shipping with Nieu before ordering.
What Nieu doors cost by size and order scope
Nieu is a cabinet-front supplier, so the price of a project depends on the number and dimensions of doors and drawer fronts rather than a single whole-kitchen package rate. A small order of 5-8 standard doors may run about $300-$1,500. A typical 15-25-door kitchen order can land around $1,500-$4,500 for fronts alone, while a larger kitchen with 30 or more pieces may reach $3,000-$7,500 or more.
These are practical budgeting estimates, not a guaranteed Nieu price list. Custom dimensions, specialty materials, upgraded finishes, and shipping can push orders above the typical range. Small fronts may cost less than large pantry or appliance panels, but custom production means price does not always rise in exact proportion to square footage.
For a standard 20-piece order, a useful initial budget is about $2,500 for the cabinet fronts, before freight, hardware, or installation. Count every door and drawer front separately, and record the width and height of each. Include panels or trim if the design requires them; they can add meaningful cost even when the door count seems modest.
Which parts of a Nieu cabinet-front quote add up
A quote can include more than the visible door price. Compare the same dimensions, style, material, and finish across estimates, and check whether shipping, hinges, samples, and installation are included. The ranges below are planning allowances for a typical residential order, not fixed charges from Nieu.
| Quote component | Low | Average | High | What changes the amount |
|---|---|---|---|---|
| Doors and drawer fronts | $1,000 | $2,500 | $5,000 | About 20-25 standard pieces; size and finish |
| Hardware | $100 | $300 | $700 | Hinges, pulls, and soft-close upgrades |
| Shipping and delivery | $100 | $250 | $500 | Order weight, destination, and packaging |
| Installation labor | $500 | $1,200 | $2,500 | Piece count, adjustments, and local rates |
| Removal and disposal | $100 | $250 | $500 | Old fronts, cleanup, and disposal arrangements |
Not every project has all these charges. Some homeowners reuse hinges or install the fronts themselves; others need new hardware, hinge boring, or adjustments to get doors aligned. Confirm how the supplier handles measurement and hardware preparation before submitting the order. A small mismatch in hinge position can create extra labor or require replacement parts.
Ask for an itemized total that separates fronts, freight, hardware, and labor so a low door price does not hide a higher delivered cost. If labor is quoted hourly, compare both the rate and estimated hours: $50-$100 per hour is a common planning range for cabinet-installation labor, though local rates vary.
How dimensions, wood species, and finish change the price
Door dimensions are a major cost driver. A standard 12-by-18-inch door generally costs less than a 24-by-36-inch door, and oversized pantry fronts or panels can cost substantially more than ordinary upper-cabinet doors. A project with several nonstandard widths also involves more measuring and custom fabrication than a set built from repeated sizes.
Material and finish choices matter too. Painted or veneered fronts may price differently from solid-wood styles, while premium wood species, visible grain matching, or specialized finishes can raise the estimate. A useful planning allowance is $50-$150 for many standard fronts and $150-$300 or more for large, detailed, or upgraded pieces. Actual product options and prices should be checked against the current Nieu catalog.
Style can change both material use and labor. A simple slab front has a different construction process from a raised-panel or detailed shaker design. Glass-ready doors, unusual profiles, and decorative panels may require a separate specification. For 25 pieces, even a $30 difference per front changes the cabinet-order budget by $750, so compare the complete set rather than focusing on one sample door.
Measure each opening and existing front precisely before comparing materials; a 1-inch sizing error can turn a competitive quote into a costly remake. For an especially wide front above about 24 inches or a tall panel above 36 inches, ask whether the construction, weight, and hinge requirements affect pricing or installation.
Where cabinet-front replacement saves money over a remodel
Replacing doors and drawer fronts can cost less than removing and replacing otherwise sound cabinets. A full cabinet replacement often includes demolition, new boxes, countertop disruption, and plumbing or electrical work. A front-only update leaves the cabinet boxes in place, so the main costs are the new fronts, finish coordination, hardware, and labor.
For a kitchen with 20-25 fronts, a cabinet-front order plus installation might total around $2,500-$7,000, depending on materials and labor. A broader refacing job that also covers exposed cabinet sides and face frames can cost roughly $5,000-$12,000. Full cabinet replacement commonly starts around $10,000 and can exceed $30,000 once installation and related work are included. These are broad U.S. project comparisons, not equivalent product quotes.
Refacing is less suitable when cabinet boxes are damaged, water-swollen, poorly laid out, or difficult to bring into alignment. In those situations, new fronts may improve appearance without resolving the underlying problem. A contractor can inspect box condition and confirm whether the existing hinges and mounting points can support the replacement fronts.
Front replacement offers the clearest savings when the cabinet boxes are sturdy and the existing kitchen layout still works. Include panels, toe kicks, and exposed end surfaces in the comparison; leaving them unfinished can make new doors look mismatched even if it reduces the initial quote.
How much do measuring and installation add to the order
Installing cabinet fronts can take a skilled installer about 6-16 hours for a straightforward kitchen with 20-25 pieces. Rates of roughly $50-$100 per hour put labor near $300-$1,600, although a contractor may charge a project minimum or quote a flat amount. Work can take longer if cabinets are out of square, hinge locations need modification, or the job includes trim and exposed panels.
DIY installation avoids much of the labor charge but still requires careful measuring, compatible hinges, and tools for alignment. A homeowner may spend $50-$250 on measuring aids or installation tools if they do not already have them. Hardware costs are separate, and new hinges may run around $5-$20 each depending on style and features.
Before ordering, confirm whether the fronts arrive with holes drilled for the intended hinges and handles. Existing hinge placement is not universal. A professional measurement service or installer may charge $100-$300 for a visit or assessment, sometimes credited toward later work. Check whether the quote includes removal of old fronts and final adjustment after the new pieces are mounted.
Installation is often the largest controllable add-on after the fronts themselves, especially when a kitchen has many doors or nonstandard hinge positions. Get a labor estimate based on the actual count of doors, drawer fronts, and panels instead of relying on a generic kitchen-size allowance.
Three kitchen order examples show realistic totals
A 10-piece refresh with eight standard doors and two drawer fronts might cost $700-$1,500 for the fronts, assuming midrange finishes and ordinary dimensions. Add $100-$250 for shipping and $300-$700 for professional mounting, and the project could total about $1,100-$2,450. Reusing compatible hinges can keep hardware spending near zero.
A 20-piece kitchen with 14 doors and six drawer fronts might run $1,800-$3,600 for fronts. Allow $150-$350 for shipping, $150-$400 for replacement hinges and pulls, and $700-$1,500 for installation. A realistic total is approximately $2,800-$5,850, with larger fronts or premium finishes pushing the estimate upward.
A 30-piece kitchen with several tall pantry doors and upgraded wood or finish choices could cost $3,500-$6,500 for the fronts. Shipping may add $250-$500; hardware may add $250-$600; and installation could add $1,200-$2,500. That places the project near $5,200-$10,100 before any cabinet-side panels, frame covering, or repair work.
These examples show why piece count alone is not enough: dimensions, upgrades, and installation scope can shift a project total by thousands of dollars. Replace the example quantities with a measured list, then compare quotes using the same material and finish assumptions.
How U.S. location and shipping affect Nieu door pricing
Cabinet-front pricing can vary by location even when the product selection is identical. Labor is commonly higher in large coastal metros than in many rural markets. As a broad planning estimate, installation in a high-cost urban area may be 15%-35% above a lower-cost market, while small towns can still have higher travel charges if qualified installers are farther away.
Shipping depends on the supplier’s delivery terms, order size, packaging, and destination. A large shipment of custom fronts is bulky and needs protection, so a distant address or special delivery arrangement can add to the total. Ask whether the quoted price includes delivery to the home, curbside drop-off, or a freight terminal, and whether the buyer must arrange unloading.
Local taxes and any contractor charges for travel or disposal can also change the delivered project cost. Sales-tax treatment varies by state and by how materials and installation are billed. A local installer may include travel in a flat quote, while another may charge separately for trips to measure, install, and return for adjustments.
Compare the final delivered price and local labor quote, not just the listed price per door. For accurate regional budgeting, request a shipping estimate for the finished piece count and ask installers to state whether tax, travel, removal, and cleanup are included.
Ways to lower the cabinet-door budget without reordering
Keep the specification simple where appearance allows. Repeating standard widths, choosing a common finish, and limiting oversized custom fronts may reduce fabrication and installation complexity. A slab or straightforward shaker style can be a more economical choice than a highly detailed profile, but compare actual quotes rather than assuming every style has the same price difference.
Reuse sound hinges and pulls when they fit the new fronts and match the desired look. Confirm compatibility before ordering, since old hinge positions or worn hardware can create fitting problems. If only a few doors are damaged, replacing those pieces may cost less than refreshing every cabinet, provided the finish can be matched closely and the supplier can produce the required dimensions.
Complete measuring and cabinet preparation before the order is placed. Label each front by location, verify dimensions twice, and confirm the hinge and handle specifications. Avoiding one remade custom door can save $100-$300 or more, plus extra shipping and installation time. Compare at least two itemized installation quotes based on the same work scope.
The most dependable savings come from reducing unnecessary custom work and preventing measurement errors, not choosing a cheaper front that will not fit. Keep the cabinet layout and boxes if they are in good condition, but budget for repair or replacement if moisture damage or structural problems make new fronts a short-term fix.