P.J. Fitzpatrick bathroom cost depends on whether the project is a tub or shower replacement, a conversion, or a full-room remodel; the company does not publish one fixed national price list. A straightforward replacement may run about $6,000-$14,000, while a broader remodel often reaches $15,000-$35,000 or more, with labor, materials, plumbing changes, and location driving the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Tub or shower replacement | $6,000 | $10,000 | $18,000 | Existing layout and plumbing retained |
| Tub-to-shower conversion | $8,000 | $14,000 | $22,000 | Standard alcove, midrange enclosure |
| Full bathroom remodel | $15,000 | $25,000 | $40,000+ | Fixtures, surfaces, and some plumbing work |
| Installed shower system | $700 | $1,100 | $1,800+ | Per sq. ft. of shower area, depending on scope |
Planning ranges are estimates, not a P.J. Fitzpatrick quote; local labor and project scope can change the total.
What a P.J. Fitzpatrick bathroom project typically costs
For a limited-scope job, such as replacing a tub or shower without moving drains, a practical budget is $6,000-$18,000. A tub-to-shower conversion commonly falls around $8,000-$22,000. A full bathroom renovation with a new vanity, flooring, fixtures, and finish work can reach $15,000-$40,000 or more.
Most of the difference comes from scope, not the contractor’s name alone. Estimates assume a standard 5-by-8-foot bathroom, normal access, midrange products, and no hidden water damage. A local in-home assessment is needed to confirm what the company offers in the homeowner’s area and which work is included.
How shower materials and installation labor appear on quotes
Quotes may combine product and installation prices rather than list every task separately. The following ranges help evaluate a line-item estimate for a common tub or shower project; they are not a representation of P.J. Fitzpatrick’s internal pricing.
| Quote component | Low | Average | High |
|---|---|---|---|
| Shower wall panels or surround | $1,500 | $3,500 | $7,000 |
| Base, tub, or enclosure | $900 | $2,200 | $5,000 |
| Installation labor | $2,000 | $4,500 | $8,000 |
| Demolition and disposal | $500 | $1,200 | $2,500 |
| Plumbing, valves, and trim | $400 | $1,200 | $3,500 |
Assumptions: Standard alcove installation, no major framing repairs, and typical U.S. contractor labor. Labor can be approximated with ; a 24-40-hour crew scope at $75-$125 per worker-hour implies $1,800-$5,000 before overhead or specialty trades.
Ask whether removal, waterproofing, disposal, and finish repairs are included. Those items can otherwise appear as separate charges or allowances.
Bathroom size, plumbing moves, and wall condition shift the estimate
A 30-by-60-inch alcove replacement is usually less expensive than a walk-in shower with custom glass or a larger footprint. Moving a drain, toilet, or supply lines can add roughly $1,000-$4,000, depending on access and the amount of pipe relocation. A shower larger than 36 by 60 inches may also require more wall material, a larger base, or custom enclosure work.
Existing leaks and damaged subfloor can change a quote after demolition. Minor localized repairs may add $300-$1,000; replacing substantial subfloor or correcting framing can add $1,500-$5,000 or more. Confirm how concealed damage will be priced before signing. Ask for written rates, approval steps, and any allowance limits.
What bathroom labor time and crew size mean for the price
A direct tub or shower replacement may take 2-5 working days, while a more involved conversion often needs 4-8 days. A full remodel can take 2-4 weeks of calendar time because plumbing, inspections, material delivery, and finish trades may not work continuously. The household may also need to plan for limited bathroom access during installation.
Labor rates vary by market and trade. Licensed plumbing work may bill at $90-$160 per hour, while general installation labor can be priced as a project rather than an hourly charge. Compare the scheduled work and warranty coverage, not just the crew’s stated daily rate.
Regional labor rates change the same shower project
Prices in dense Northeast and Mid-Atlantic markets can run about 10%-25% above a national middle estimate, particularly where wages, parking, and disposal fees are higher. Many Southern and Midwestern markets may fall 5%-15% below that benchmark, while remote areas can cost more if products or crews must travel farther.
P.J. Fitzpatrick’s service area and available product lines should be verified for the property address. A quote from another region is a weak comparison unless it covers the same materials, demolition, plumbing, and warranty.
Removal, custom glass, and code work can add charges
Old fixture removal and haul-away may cost $500-$2,500, depending on weight, access, and disposal. Custom glass doors can add roughly $800-$2,500; grab bars, shelving, upgraded valves, or built-in seating may add $150-$1,500 each. Permit fees and inspection costs vary by municipality, and electrical or plumbing updates may be required when fixtures are relocated.
Separate required work from optional upgrades in the written estimate. Check whether the quote includes permits, wall repair, waterproofing, and cleanup, and whether an allowance means a fixed price or a spending cap.
When a shower repair costs less than replacement
Replacing a worn valve, resealing joints, or repairing a small area of damaged surround may cost $250-$1,500 when the base and surrounding structure remain sound. Replacing a shower door alone may run about $600-$2,000 installed. A full replacement becomes more reasonable when there is recurring leakage, widespread panel damage, or a failed base.
Repair is usually the lower-cost choice when the problem is isolated and the underlying waterproofing is intact. A contractor should identify the leak source before a cosmetic patch is treated as a lasting fix.
How to control the P.J. Fitzpatrick bathroom quote
Keep plumbing locations and the shower footprint unchanged where possible, select standard-size products, and decide which accessories are essential before the appointment. Completing simple room clearing in advance may help, but demolition or plumbing should be left to qualified workers when the contract or local rules require them.
Request at least two itemized estimates with matching specifications, including product model, labor, disposal, permits, and warranty. Ask whether a lower-cost wall system meets the same installation requirements as tile, and avoid paying for premium glass or fixtures unless they improve a specific need. Controlling scope and comparing like-for-like quotes are the most dependable ways to manage the final price.