The Pacific Energy Neo 1.6 wood stove typically costs about $2,700-$3,700 for the appliance, while a complete installation often brings the total to $4,000-$7,500. The final price depends on dealer location, venting and chimney condition, hearth requirements, and how much labor the home needs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Neo 1.6 stove | $2,700 | $3,200 | $3,700 | Appliance price before installation |
| Standard installation | $1,300 | $2,300 | $3,800 | Labor and typical connection materials |
| Installed project | $4,000 | $5,500 | $7,500 | Assumes sound, accessible installation area |
| Chimney liner | $800 | $1,500 | $2,500 | Common stainless-steel liner range |
Assumptions: U.S. dealer pricing, standard black finish, ordinary access, and no major chimney rebuild.
Pacific Energy Neo 1.6 pricing for stove and installation
For the stove alone, budget approximately $2,700-$3,700 before sales tax and delivery. A typical installed project is about $4,000-$7,500 when the existing chimney is usable or needs only a liner. The average complete bill is near $5,500, but local labor rates and required hearth or venting work can move it substantially.
The Neo 1.6 has a 1.6-cubic-foot firebox and is intended for smaller to medium heating areas, with actual performance affected by insulation, layout, fuel, and climate. Retail quotes can vary by dealer and included accessories; confirm the exact model, trim, delivery, and warranty terms before comparing offers. Separate the appliance price from the installed price to compare quotes fairly.
Where the stove quote goes beyond the appliance
Installation bids may combine labor, venting, floor protection, delivery, and inspection coordination. The table shows common planning ranges; a site visit is needed to establish whether existing components meet the stove’s installation requirements.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Stove | $2,700-$3,700 | Per unit | Dealer, finish, included parts |
| Installation labor | $700-$1,800 | Per job | Access, crew time, complexity |
| Chimney liner and connector | $800-$2,500 | Per system | Height, diameter, liner condition |
| Hearth protection | $250-$1,000 | Per installation | Required dimensions and materials |
| Delivery and disposal | $100-$500 | Per job | Distance, stairs, old-stove removal |
Ask for itemized labor and materials so required safety work is distinguishable from optional upgrades. Sales tax, permit fees, and inspection charges may appear separately and vary by jurisdiction.
How firebox capacity and chimney height change the estimate
Chimney dimensions and condition are major pricing variables. A liner run of roughly 15-25 feet may cost around $800-$2,500 installed, while damaged masonry, an oversized flue, or a difficult roofline can add several hundred to several thousand dollars. A chimney rebuild is a separate project and should not be treated as ordinary stove hookup work.
Hearth size also affects cost. If the existing noncombustible floor protection does not meet the stove manual’s clearance and extension requirements, a new pad or hearth can add about $250-$1,000. A narrow doorway, steep roof, or installation above the first floor may increase labor by 10%-30%. Get the chimney and hearth checked before treating an appliance-only quote as a project budget.
Which chimney and hearth upgrades are actually needed
Not every installation needs a new chimney system. A qualified installer can assess whether an existing masonry chimney is sound, properly sized, and suitable for a compatible liner. Reusing compliant parts can avoid replacement expense, but skipping required liner, clearance, or hearth work can create safety and inspection problems.
For a straightforward connection, labor may take about 4-8 hours with a small crew. Adding a liner, modifying hearth protection, or removing an old appliance can extend the work to a full day or longer. Labor pricing often works out to roughly $75-$125 per technician-hour, although many contractors quote a fixed job rate. Ask the installer to identify which upgrades are code, manufacturer, or condition requirements.
Installation labor changes with access and chimney work
A basic installation can involve two workers for several hours, but the quote may include travel, setup, testing, and cleanup as well as hands-on fitting. Contractors may charge a minimum service fee of about $300-$600 when scheduling a small or remote job. Difficult access, roof work, or extra chimney height can increase the labor portion.
Compare the stated scope rather than hourly rates alone. One installer may include liner installation, connector pipe, and a final draft check, while another may list those as extras. Confirm crew size, estimated hours, included materials, and disposal charges in writing.
Regional dealer prices and labor rates across the U.S.
Installed prices in high-cost metro areas and parts of the Northeast or West Coast may run about 10%-25% above a national midrange, reflecting labor, delivery, and local code requirements. Rural markets can be 5%-15% lower in labor, but limited installer availability or long travel distances may erase the savings.
Seasonal demand can also influence scheduling and quotes. Late summer and fall are busy periods in many heating markets; arranging a site assessment in spring or early summer may provide more scheduling flexibility, though the stove’s dealer price is not guaranteed to fall. Use local written bids because regional averages cannot account for the actual chimney or code conditions.
Added charges for permits, removal, and delivery
Old-stove removal commonly adds about $150-$500, depending on weight, stairs, and disposal options. Delivery may cost $100-$300 locally, with extra charges for long distances or difficult access. A permit or inspection may add roughly $50-$300 where required; local authorities determine the fee and whether inspections apply.
Request an estimate that states whether tax, permits, chimney inspection, liner, connector pipe, hearth, and disposal are included. Repairs to masonry or structural changes should be itemized separately rather than hidden in a general installation allowance. Unpriced exclusions can make a low initial quote more expensive than a complete bid.
How to lower a Neo 1.6 project price without cutting safety
Compare at least three local quotes with the same model and installation scope. If the existing chimney and hearth meet the appliance instructions and local rules, reuse them where the installer confirms they are safe. Handle simple room preparation, such as clearing furniture, but leave appliance lifting, venting, and clearance decisions to qualified professionals.
Choose only the finish and accessories needed for the installation, and check whether delivery or old-stove removal is already included. Avoid paying for a chimney rebuild unless inspection shows it is necessary; equally, do not omit a required liner or code upgrade to reduce the bid. The best savings come from confirming scope early and removing optional charges, not from reducing essential safety work.