A Pacific range hood typically costs about $900-$2,500 for the appliance, with many buyers budgeting around $1,500 before installation. Installed totals commonly reach $1,200-$3,500; hood width, blower capacity, ductwork, electrical changes, and local labor rates shape the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Pacific hood unit | $900 | $1,500 | $2,500 | Varies by model, width, and features |
| Standard installation | $300 | $700 | $1,500 | Existing duct and wiring assumed at low end |
| Installed project | $1,200 | $2,200 | $3,500 | Before major remodeling or long duct runs |
| Replacement filters | $30 | $75 | $180 | Price depends on filter type and model |
What a Pacific hood costs by size and setup
For a standard 30-inch Pacific hood replacing an existing unit, the appliance commonly falls near $900-$1,600. A 36-inch hood or model with stronger extraction, more speed settings, or upgraded lighting may run $1,300-$2,500. These are planning ranges rather than fixed manufacturer prices; model availability and retailer quotes can differ.
With straightforward replacement labor, the total is often $1,200-$2,300. A new installation that needs a duct route, cabinet changes, or electrical work can cost $2,000-$3,500 or more. For a typical 30- to 36-inch replacement with usable ductwork, a practical installed budget is about $1,500-$2,500.
Assumptions: U.S. market pricing, standard residential installation, existing cabinet in serviceable condition, and no major code or structural work.
How the hood, labor, and ductwork shape the quote
Quotes separate the appliance from installation and job-specific materials. The table shows common cost shares; line items may be combined by a contractor, and ductwork charges can rise when the route is long or difficult to access.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Pacific hood | $900 | $1,500 | $2,500 | Unit price by size and features |
| Labor | $250 | $550 | $1,000 | Removal, mounting, and connection |
| Ducting and fittings | $50 | $250 | $800 | Existing path to new or extended vent |
| Electrical and mounting supplies | $40 | $150 | $450 | Minor wiring, supports, and fasteners |
| Removal and disposal | $25 | $75 | $200 | Old hood and debris |
Labor alone often runs $250-$1,000, depending on access, duct changes, and the installer’s hourly rate.
Which width, airflow, and vent path raise the price?
Hood width and blower capacity affect both the unit price and installation requirements. A 30-inch model generally costs less than a comparable 36-inch version; a 42-inch or custom-fit setup may require additional cabinet or wall work. Confirm the hood width against the cooking surface and the manufacturer’s clearance requirements before ordering.
Airflow is measured in cubic feet per minute (CFM). Higher-capacity blowers and longer duct runs can increase equipment and labor costs. A run exceeding about 10 feet, multiple elbows, or a duct diameter that must be changed can add roughly $150-$600 in materials and labor. Existing duct location and size can matter as much as the hood’s advertised airflow.
Wall-mounted, under-cabinet, and island installations are not interchangeable. Island hoods may need ceiling support and a longer concealed vent route, pushing installation above a simple replacement. Ask the installer to confirm duct diameter, outlet location, and required makeup air before comparing final quotes.
How long Pacific hood installation takes and what labor covers
A direct replacement usually takes about 2-4 hours for one installer when the mounting location, duct, and wiring already match. A new duct route, cabinet alteration, or ceiling access can extend the work to 5-10 hours or require a second trade. Residential installers commonly charge around $75-$125 per hour, although many provide a flat project price.
Labor normally covers removal of the old hood, mounting the new unit, basic connection, and a function test. It may not include new circuits, patching, painting, permits, or concealed duct repairs. Ask whether the quote includes removal, duct fittings, electrical work, and cleanup before approving the total.
When Pacific hood extras add $100 or more
Removal and disposal may add $25-$200, while a replacement duct cap, transition, or short duct section can add $50-$300. Cabinet reinforcement or trim work may add $100-$500. Difficult attic or roof access, masonry drilling, and repairs to damaged ducts can cost more, especially when a separate roofer or electrician is needed.
Permit requirements vary by city and by the scope of electrical or ventilation changes. A simple appliance swap may not need a permit, but a new circuit or substantial duct modification may. If a contractor recommends makeup air for a high-capacity blower, request the applicable code requirement and separate price; the equipment and labor can add several hundred dollars or more.
Get add-ons listed individually so a low installation price does not conceal major exclusions.
Pacific hood pricing compared with basic and custom alternatives
A basic non-Pacific under-cabinet hood may cost about $150-$700, while premium specialty hoods can exceed $2,500 before installation. Pacific pricing generally sits above entry-level options, so compare matching width, blower rating, construction, controls, and warranty rather than comparing brand names alone.
Repair can be less expensive when the problem is a switch, light, or replaceable blower component; a service visit and repair commonly total $150-$500, depending on parts and diagnosis. If the motor, controls, and vent system all need work, replacement may be more economical. Compare a repair estimate with the installed price of a like-for-like replacement.
Why installation quotes vary across U.S. markets
Labor and access can shift an otherwise similar job. A straightforward installation in a lower-cost suburban or rural market may be 10%-20% below a large coastal city quote. Dense urban markets and high-cost metro areas can run 15%-30% above a national planning estimate, particularly when parking, building access, or scheduling adds time.
These are broad quote differences, not guaranteed regional markups. A local estimate should identify labor, travel or service fees, and any subcontractors. Compare at least two itemized quotes for the same hood model and installation scope.
Which Pacific hood choices can lower the final bill?
Keeping the existing vent location and duct size is often the most effective way to control installation expense. Measure the opening and verify the model’s dimensions before purchase to avoid cabinet alterations or restocking charges. Choose the smallest suitable width and airflow capacity for the cooking setup rather than paying for an oversized configuration.
Request pricing for the hood, installation, disposal, and optional work as separate items. If the old hood is already removed safely and the installer permits homeowner prep, that may reduce labor; electrical and roof work should remain with qualified trades. Avoid adding ductless accessories where an effective vented setup is required by the appliance instructions or local rules.
Preserving a compatible duct path and comparing equivalent models usually offers more savings than sacrificing essential ventilation performance.