Pella hurricane windows typically cost about $1,000-$2,800 per window installed, with price depending on size, impact rating, glass and installation conditions. A whole-home project with 10 standard windows often totals $10,000-$28,000 before unusual structural work or premium options.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed window | $1,000 | $1,800 | $2,800 | Per standard opening |
| 10-window project | $10,000 | $18,000 | $28,000 | Removal and standard installation |
| Large or custom window | $2,000 | $3,500 | $5,500+ | Oversized, specialty shape, or difficult opening |
| Installation labor | $250 | $500 | $900 | Per standard window; access and repairs change price |
These are planning ranges, not a fixed Pella price list. Actual products, local approvals, dealer pricing, and opening measurements determine the quote.
What Pella hurricane windows typically cost by size
For a standard replacement opening around 3 by 5 feet, a Pella impact-resistant window commonly lands near $1,000-$2,800 installed. The lower end generally assumes a basic configuration, straightforward access, and no major frame repairs. Larger units, custom colors, specialty shapes, or higher-performance glass can push a single opening above $3,000.
For a typical 10-window home, budgeting $10,000-$28,000 is a practical starting point. A 15-window project might run $15,000-$42,000, though quantity discounts and the mix of window sizes can shift the total. Compare quotes based on the exact product series and impact rating, not only the brand name.
Assumptions: standard residential replacement openings, impact-rated glazing, ordinary access, and U.S. contractor labor.
Where frame, glass, and removal charges appear
Written estimates may bundle materials and labor, so ask the dealer to identify what is included. The following breakdown illustrates a standard opening; regional prices and product specifications can differ.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Impact window and frame | $600-$1,700 | Per unit | Size, frame material, glass, finish |
| Installation labor | $250-$900 | Per opening | Access, fastening, crew time |
| Old window removal | $50-$200 | Per unit | Frame condition and disposal needs |
| Trim, flashing, sealant | $75-$350 | Per opening | Waterproofing details and finish work |
| Permit or inspection | $100-$600 | Per project, commonly | Local fees and number of openings |
Confirm whether the quote includes disposal, interior trim, exterior sealing, permits, and inspection fees. Some estimates exclude these items or list them as allowances, leaving room for added charges after installation begins.
How glass rating and opening dimensions change the price
Impact glazing is designed to meet applicable windborne-debris requirements, but the required product approval depends on the location and building code. A window with a larger span or unusual geometry needs a different configuration than a common double-hung unit. At roughly 15 square feet or more, added size and weight can require higher-cost glass, extra handling, or additional installation labor.
Frame material, color, grille pattern, and operating style also affect the estimate. Fixed units can cost less than comparable operable styles, while custom shapes and matching specialty finishes raise material costs. A quote should identify the glass package and approval documentation for each opening, particularly in coastal jurisdictions.
Do not compare two bids as equivalent unless the dimensions, operating style, impact specifications, and finish match. A lower price may reflect a different product or omitted work rather than a better rate.
What installation labor adds to a replacement project
Contractors may charge roughly $75-$150 per labor hour, but window pricing is usually presented per opening or for the full project. A simple replacement can take about 2-4 hours per window; masonry openings, upper floors, or damaged framing can take longer. A crew of two may complete several standard openings in a day, depending on access and interior finish work.
For example, 3 hours at $100 per hour equals $300 in direct labor per window. That calculation does not necessarily include travel, supervision, insurance, disposal, or contractor overhead, which may be built into the installed price.
Why coastal Florida quotes can exceed inland prices
Labor and product availability vary by market. In high-demand coastal areas of Florida, impact-window quotes can be about 10%-25% above comparable inland work because of local code requirements, permitting, contractor demand, and logistics. Urban markets may also charge more for parking, restricted access, or multi-story installation; rural locations can face delivery or travel charges.
These percentages are broad planning comparisons, not guaranteed regional premiums. Local building departments may require approved products or specific installation methods. Ask the contractor to state the permit, product approval, and inspection assumptions behind the quote.
Use local bids for the final budget because code and labor differences can outweigh national averages.
Which project extras can raise the final invoice
Frame rot, water damage, stucco or siding repair, and out-of-square openings are common sources of added expense. Minor opening repairs may add $150-$600 per window, while extensive framing or exterior restoration can cost more. Second-story access, protective coverings, and disposal of heavy glass may also appear as separate charges.
Ask whether the estimate includes removal and disposal, interior casing, exterior finish repair, and cleanup. If a contractor uses an allowance for hidden damage, request the rate or approval process for work beyond that allowance. Permit charges commonly vary by town and project, so they should not be assumed to be identical across a county.
Three sample Pella impact-window project estimates
These examples show how size and scope affect totals; actual Pella series, dealer pricing, and local labor will vary.
- Six standard replacements: six windows at $1,500 each, plus $600 for permits and trim adjustments, totals about $9,600.
- Ten mixed-size openings: eight standard units at $1,750 and two larger units at $3,200, plus $1,500 in removal and finish work, totals about $21,500.
- Twelve coastal replacements: twelve units averaging $2,100 installed, plus $1,200 in access and permit charges, totals about $26,400.
Check whether the sample quote includes sales tax where applicable, disposal, and all finish work. Each estimate should list window sizes or opening identifiers so the total can be matched to the home.
Where homeowners can trim a Pella window budget
Keep the project focused on windows that need replacement, and avoid adding custom colors or decorative options unless they matter to the finished home. Standard sizes and configurations are generally easier to price than custom shapes. If several windows need work, bundling them into one installation can reduce repeat setup and travel charges.
Collect at least three itemized quotes using the same opening schedule and product specifications. Compare warranty terms, installation details, removal, and permitting along with the bottom line. Existing frames should be evaluated before choosing full-frame replacement; an insert installation may cost less when the frames are sound and the code allows it.
Scope consistency is the most reliable way to find a real price difference rather than an incomplete bid. Avoid paying for upgrades that do not address the home’s required impact protection or desired appearance.