Pella window screen replacement typically costs $60-$250 per screen, with an average near $125 for a standard fixed screen. The final price depends on the window model, screen size and mesh, whether the frame is reusable, and whether a technician must measure or install it.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Standard replacement screen | $60 | $125 | $250 | Screen and frame, where available |
| Mesh replacement only | $25 | $60 | $110 | Reusable frame; size and mesh affect price |
| Professional measuring and installation | $75 | $150 | $300 | May include a service minimum |
| Retractable or specialty screen | $200 | $450 | $800 | Model-specific assemblies can cost more |
Assumptions: U.S. pricing for residential windows, standard access, and ordinary insect mesh; Pella parts and local labor vary.
Local labor and shipping create noticeable regional differences. In high-cost metropolitan markets, installed pricing may run about 10%-25% above a national-style estimate because of higher service rates and travel time. Smaller towns may have lower hourly labor but fewer suppliers, which can increase shipping costs or lead times for a model-specific screen.
As a broad comparison, a basic installed screen might be quoted around $90-$180 in a lower-cost market and $120-$280 in a higher-cost metro. These are planning ranges, not guaranteed regional tariffs; screen dimensions and part availability can outweigh geography. For a specialty retractable assembly, local installation charges may also be separate from the product price.
Request at least two itemized quotes if the work includes several windows or a custom order. Confirm whether each quote covers tax, delivery, measurement, installation, and removal of old screens. A low parts price is not necessarily the lowest total if it excludes a service visit or fitting.
When a Pella screen repair beats full replacement
Mesh replacement can be the economical choice when the frame is straight, corners are secure, and the spline groove is undamaged. At roughly $25-$110 per screen, rescreening may cost less than a new assembly. Small mesh tears can sometimes be patched, but a patch may be visible and is less suitable when the material is brittle or has multiple damaged areas.
Replace the full screen when the frame is warped, the corners separate, or the screen no longer seats in the window. A new fixed assembly may cost $60-$250, but ordering a compatible unit reduces fit problems. If the quote for an older specialty screen approaches the price of a current equivalent, ask whether a compatible replacement is available before approving a custom build.
Screen condition does not usually require replacing the window itself. Keep the comparison focused on mesh repair, complete screen replacement, and specialty assembly replacement; window replacement is a much larger project and is generally unrelated to a damaged screen. Use the frame’s condition and the verified part fit—not the mesh tear alone—to decide between rescreening and a new unit.
Three realistic screen replacement estimates
A single standard 12-by-24-inch fixed screen with basic mesh and a reusable frame may cost $35-$75 for rescreening at a shop. A complete compatible screen with a service visit could total about $140-$300, depending on local minimum charges and whether measurement is needed.
For four standard screens measuring roughly 10-15 square feet each, a batch order with basic mesh might run $240-$800 for parts. A single installation visit could add $100-$250, putting the total near $340-$1,050. The lower end assumes standard sizes and accessible windows; custom colors or nonstandard frames increase the estimate.
A single retractable or other specialty screen can cost $200-$600 for the assembly, with fitting potentially bringing the installed total to $300-$800. The price varies substantially by Pella series, screen mechanism, and availability. These examples are useful quote checks, but the exact window identification and measurements determine the final price.