When shopping for PGT sliding glass doors, buyers typically see a range that reflects unit price, installation, and regional labor. The cost for a standard 6 or 8 foot slider depends on glass type, grille pattern, frame color, and site conditions. This guide outlines PGT sliding glass doors prices, with practical ranges to help plan a budget and compare quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit price (6 ft, vinyl frame, clear glass) | $600 | $900 | $1,350 | Excludes installation |
| Door unit price (8 ft, vinyl frame, decorative glass) | $900 | $1,400 | $2,000 | Higher for premium options |
| Professional installation | $400 | $800 | $1,200 | Includes labor and basic flashing |
| Old frame removal and disposal | $100 | $300 | $600 | Per-door, optional |
| Hardware and trim upgrades | $50 | $150 | $350 | Lockset, handles, sill, finishes |
Assumptions: Midwest labor rates, standard vinyl frame, clear glass, standard installation during normal hours.
Major Price Drivers For PGT Sliders
Unit price varies by door size, frame material, and glass type. In most markets, a 6 ft PGT slider with vinyl frame and clear tempered glass sits toward the lower end, while an 8 ft slider with upgraded glass and grille patterns raises the price. Regional labor rates, availability of colors, and site accessibility also shift totals. Typical installed ranges for standard configurations are shown below.
| Factor | Low | Average | High | What changes the total |
|---|---|---|---|---|
| Door size | 6 ft | 6–8 ft | 8 ft | Longer span adds glass and frame cost |
| Frame material | Vinyl | Vinyl or Aluminum | Aluminum with color coatings | Stronger frames cost more |
| Glass type | Clear tempered | Low-E or features | Insulated or decorative | Energy efficiency boosts price |
| Grille pattern | No grilles | Simple | Grilles with grids | Affects manufacturing and alignment |
| Site access | Good access | Standard | Limited access | Delivery and removal time |
Assumptions: Single-story installation, standard curb appeal, typical weather conditions.
Prices differ by region due to labor markets and permitting practices. In the U.S., a typical installed PGT sliding glass door—6 ft or 8 ft—falls into these ranges. Regional deltas can swing totals by 10–25% between urban and rural markets.
- West Coast metro areas: $1,200–$2,600 installed
- Midwest suburban markets: $1,000–$1,900 installed
- Southeast rural to small towns: $900–$1,700 installed
Assumptions: Standard weather seal, no custom shape, optional removal of old frame.
Per-unit pricing helps compare quotes line by line. For a typical vinyl-frame PGT slider, per-unit pricing breaks down as follows:
- 6 ft door: $600–$1,100
- 7 ft door: $750–$1,300
- 8 ft door: $900–$1,500
Assumptions: Standard tempered glass, no impact-resistant hardware, single-pane sill.
Labor hours commonly range 4–8 hours per door including setup, removal, and finish work.
Quote line items often include more than the door unit. The table below captures common components with example ranges.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Removal of old unit | $75 | $150 | $350 | Dependant on frame condition |
| Site preparation | $50 | $120 | $250 | Floor protection, threshold prep |
| Finishing trim | $25 | $75 | $180 | Interior/exterior finishes |
| Delivery | $50 | $100 | $200 | Regional service charges |
| Warranty extension | $0 | $50 | $150 | Optional |
Assumptions: Standard flashing and sill hardware included; no structural reinforcement required.
Upgrades such as Low-E coatings, double-pane insulated glass, or laminated glass increase efficiency and price. A basic clear glass door may sit at the low end, while premium Low-E with argon and decorative glass can push totals up by 15–40% depending on size and region. Energy-rated options cost more but lower long-term utility bills.
Smart cost-saving moves focus on scope control and material choices. For example, selecting standard glass, keeping the existing frame, and scheduling during non-peak months can reduce the total. Compare multiple quotes and consider removing optional upgrades if not essential.
Real-world examples help set expectations. Below are three scenarios with typical labor hours, per-unit pricing, and total estimates.
| Scenario | Door Size | Glass/Frame | Labor Hours | Estimated Total |
|---|---|---|---|---|
| Basic 6 ft, vinyl, clear glass | 6 ft | Clear glass | 5–6 | $1,200–$1,800 |
| 8 ft, vinyl, Low-E | 8 ft | Low-E insulated | 6–8 | $1,600–$2,600 |
| 8 ft, aluminum, decorative | 8 ft | Decorative glass | 7–9 | $2,100–$3,000 |
Assumptions: Midwest region, standard installation crew, no structural work.