Plastpro door price and cost vary by door type, size, finish, and installation. This guide breaks down typical costs for Plastpro fiberglass doors, including low, average, and high ranges in USD, with per-unit figures where relevant. The factors below help buyers estimate total expenses from purchase to install in a normal residential setting.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door Only (Fiberglass, standard 6’8”) | $350 | $550 | $900 | Prehung options cost more |
| Prehung Exterior Plastpro Door | $700 | $1,050 | $1,600 | Includes frame, hinge mortises |
| Full Installation (Labor) | $400 | $800 | $1,400 | Regional variation affects rate |
| Finish/Coating (optional) | $50 | $150 | $350 | Primer, paint, or stain |
| Hardware Package | $50 | $150 | $350 | Knob, deadbolt, handle set |
| Weatherstripping & Sealant | $20 | $60 | $120 | Air sealing increases energy savings |
Assumptions: Midwest labor rates, standard 6’8” exterior door, standard finish, typical home with retrofit installation.
Plastpro Door Types and Typical Price Ranges
Plastpro fiberglass doors come in several configurations, with price primarily driven by size, model, and whether the door is prehung. A bare door slab may cost substantially less than a fully prehung unit. For a standard 6’8” exterior Plaspro unit, expect price ranges that reflect build quality and core material. Typical total price for a basic unit including frame and hinges falls around $700 to $1,600, with higher-end skins and decorative panels pushing toward the top end.
Labor and Installation: What drives the total
Labor is a major portion of the final Plastpro door price. A standard installation includes removing the old door, preparing the rough opening, fitting the new door, shimming, and weatherproofing. Typical labor costs range from $400 to $1,400 per job depending on opening complexity, existing frame condition, and local wage levels. Most homeowners see installation costs near the $800 mark in average markets.
Regional Variations in Plastpro Door Pricing
Prices shift by region due to material shipping, availability, and labor rates. The Northeast and West Coast often see higher installed pricing compared with the Southeast or Midwest. A total project in coastal markets can exceed $2,000 for premium configurations, while inland markets may land closer to $1,000–$1,600. Assumptions: urban markets may incur higher disposal and access charges.
Size and System Type: How size affects price
Door width and height drive both material cost and frame complexity. A standard 6’8” exterior door is common, but broader or taller units add to material and hardware costs. For example, a 72″ wide by 80″ tall unit may cost 10–25% more than the standard size once a custom hinge arrangement or thicker jamb is required. Always verify exact rough opening measurements before selecting an unit to avoid unexpected surcharges.
Materials and Hardware Options
Plastpro offers different skins and core options that affect price. A basic fiberglass skin with standard hardware might sit in the lower end, while premium wood-grain finishes or decorative glass inserts raise the price. Hardware packages vary from $50 to $350 depending on lockset, lever style, and security features. Assumptions: standard Yale or Schlage deadbolt compatible hardware.
Weatherproofing and Insulation Costs
Sealing the door properly reduces drafts and energy loss. Weatherstripping, low-E glass inserts, and proper threshold installation contribute to the total cost. Expect $20 to $120 for weatherstripping and sealants, with larger or double-glazed packages increasing the price for the unit. Weatherproofing adds long-term energy savings that justify higher upfront costs.
Comparison: Plastpro vs. Similar Fiberglass Doors
When weighing Plastpro against other fiberglass options, price ranges often overlap. A typical Plastpro exterior unit may cost 10–25% less than premium fiberglass brands with similar insulation ratings, but installation complexity can narrow that gap. For a direct price comparison, consider total installed cost rather than door price alone. Assumptions: standard installation in similar climates.
Additional Costs to Budget For
Many projects incur ancillary charges that affect the final price. Permits (where required), disposal of the old door, and potential structural alterations can add $100 to $500 or more. Delivery fees, if applicable, often run $50–$150. A comprehensive upgrade plan helps prevent budget overruns. Include a contingency of 10–15% for unexpected framing or hardware needs.
Practical Ways to Reduce Plastpro Door Spending
Control scope by choosing standard sizes and finishes, compare multiple local installers, and plan for off-peak scheduling to secure lower labor rates. If your rough opening has minor damage, option to repair the frame rather than replace the entire jamb can save money. Bundling hardware and weatherproofing components into a single quote often yields better overall pricing. Assumptions: off-season installation and standard curbside delivery.
Unit Price Snapshot: Quick reference per size and job type
| Door Type | Size | Door Only | Prehung with Frame | Installed Labor |
|---|---|---|---|---|
| Plastpro Exterior | 6’8”x36″ | $350–$550 | $700–$1,100 | $400–$900 |
| Plastpro Exterior with Glass | 6’8”x36″ | $520–$900 | $1,000–$1,600 | $500–$1,100 |
| Premium Wood-Grain Finish | 6’8”x36″ | $450–$700 | $900–$1,400 | $450–$1,000 |
Note: per-unit and installed costs vary by region, access, and material options.