The Poulan Pro PP2822 is a 28cc gas string trimmer, and its price depends mainly on condition and whether it is new old stock, used, or being repaired. A working used unit commonly sells for about $40-$100, while an unused or refurbished trimmer may cost $120-$220 when available; parts and repair labor can add $20-$150.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used working PP2822 | $40 | $70 | $100 | Price varies with condition and included parts |
| New old stock or refurbished | $120 | $170 | $220 | Availability and seller warranty affect price |
| Common small repair | $20 | $65 | $150 | Parts and labor; extensive engine work may exceed this |
| Replacement trimmer | $100 | $180 | $300+ | Comparable gas models; premium or attachment-capable models cost more |
What a Poulan Pro PP2822 Usually Sells For
There is no dependable single current retail price for the PP2822 because it is an older model and may no longer be stocked as a new product. For a complete, running used trimmer, a practical private-sale range is $40-$100. A clean machine with a straight shaft, guard, handle, and working trimmer head may land near the upper end; a unit with hard starting, missing parts, or a worn head should be priced lower.
Unused inventory and refurbished examples can be listed around $120-$220, but the asking price does not guarantee that the seller has tested the machine or provides a meaningful warranty. Buyers should confirm the exact model, included equipment, return policy, and shipping charge before comparing it with a new trimmer from another brand.
For a used PP2822, about $70 is a reasonable starting budget for a running, complete example. This assumes a typical local sale, ordinary cosmetic wear, and no immediate need for engine or fuel-system work. Shipping can make an online listing less attractive: a bulky gas trimmer may add roughly $25-$70, depending on packaging and distance.
At a $40 asking price, the seller may be pricing a project or a machine with uncertain starting behavior. At $100 or more, the trimmer should be demonstrably operational, with the shaft and controls intact. A seller’s description of “ran last season” is weaker evidence than a cold start, warm restart, and short test at operating speed.
How Trimmer Parts and Repair Labor Shape the Quote
Buying an older PP2822 can involve more than the sale price. The table gives typical U.S. small-engine shop or parts-counter ranges; exact compatibility and availability should be checked using the model and part information on the trimmer. Labor rates vary, and some shops charge a minimum diagnostic or bench fee even if the owner declines repair.
| Quote item | Typical price | What it covers | When it applies |
|---|---|---|---|
| Replacement trimmer line | $5-$18 per spool | Line for the head | Routine cutting-line replacement |
| Trimmer head | $15-$45 per unit | Aftermarket or compatible head | Cracked, jammed, or worn head |
| Air filter, spark plug, or fuel line | $5-$25 per part | Common tune-up or fuel-system pieces | Basic maintenance or starting problems |
| Carburetor service or replacement | $25-$80 in parts | Cleaning kit or replacement carburetor | Fuel delivery or idle problems |
| Shop diagnosis and labor | $60-$120 per hour | Inspection, adjustment, and installation | Professional repair |
| Ignition or engine repair | $80-$200+ total | Testing and selected replacement parts | Faulty ignition, compression, or internal damage |
A basic owner-installed repair may cost $10-$35 if it needs a spark plug, filter, fuel line, or fresh fuel mix. A shop repair commonly totals $75-$150 once a diagnostic charge and labor are included. The labor estimate can be represented as ; for example, 1 hour at $80-$110 per hour is $80-$110 before parts.
Compare the repair total with the price of a working replacement before authorizing engine work. A $25 part can be sensible on a sound trimmer, but a $150 repair bill is difficult to justify if the shaft, starter, carburetor, and cutting head also need attention.
Which PP2822 Condition and Included Parts Change the Price
Condition has a larger effect on this discontinued model’s value than small differences in appearance. A machine that starts cold, accelerates without bogging, idles steadily, and restarts after warming is worth more than one tested only briefly. Ask whether it has been stored with fuel in the tank; old fuel can leave deposits that cause poor starting and may require carburetor cleaning.
Included parts matter because sourcing older or model-specific components can take time. A complete guard, handle, shaft, clutch cover, starter assembly, and trimmer head support a higher asking price. Missing hardware may be inexpensive individually, but a damaged shaft or unavailable assembly can make a low-priced trimmer impractical to restore.
Use and wear are also important. A lightly used machine may have a serviceable head and starter cord, while a heavily used one may need a new head, line, air filter, and fuel lines. If the seller claims the unit has been recently serviced, request details about what was replaced rather than treating “tuned up” as a guarantee.
Two useful price thresholds are a $40-$60 discount for a non-running unit and a $20-$45 allowance for a worn head. These are budgeting guides, not fixed deductions: a trimmer with a simple fuel issue may be worth repairing, while one with low compression or a cracked shaft can be worth little more than its usable parts.
Model identification should be checked on the product label, not inferred from color or brand alone. Similar Poulan Pro model numbers can have different engines, shafts, and attachment arrangements. A mistaken model match can lead to buying incompatible parts or overestimating what the machine can do.
Keep the PP2822 Purchase Price Down Without Buying a Project
Set a maximum total budget before responding to a listing. Add the asking price, travel or shipping, immediate maintenance, and any missing accessories. For example, a $60 trimmer that needs a $25 head and $15 in fuel-system parts already represents about $100 before tools or labor.
Ask for a cold-start demonstration and a short run at full throttle. If the seller cannot start it, treat it as a repair project and price it accordingly rather than paying the running-unit rate. A brief inspection of the shaft, guard, trigger, throttle lock, starter cord, and head can reveal damage that is not visible in listing photos.
Compare the total against a basic new gas trimmer, especially if the PP2822 needs shop work. Entry-level replacement models may cost roughly $100-$180, with warranty coverage and parts availability that an older used unit may not offer. A used PP2822 at $50 can be a good value; the same machine at $90 plus a $100 repair is a different purchase.
The lowest-risk savings usually come from buying a complete running unit locally and doing simple maintenance yourself. Do not pay extra for claims about professional servicing without receipts, and avoid replacing several components at once until a mechanic has identified the actual fault.
Used PP2822 Listings Compared With New Old Stock
A private-party used unit is usually the least expensive route, at about $40-$100 before transportation. It offers little or no warranty, so a test matters. A dealer or refurbisher may ask $120-$220 for a clean or reconditioned example, sometimes with a short warranty, but buyers should verify what that warranty covers and whether the seller will accept a return.
New old stock can be priced above a used machine despite its age. Rubber fuel lines, seals, and other components can deteriorate during long storage, so “unused” does not automatically mean ready to work. Ask whether the unit was recently started, whether it includes the original guard and manual, and whether the seller has a return period.
Online prices may look lower before delivery. A $75 listing with $45 shipping and no easy return costs $120 in practice. A local $90 machine that can be inspected and tested may offer better value. For a shipped trimmer, check whether the seller drains fuel and packs the unit safely; shipping rules and carrier requirements can affect the transaction.
Used local purchases are generally the cheapest, while refurbished sales make sense only when testing, return rights, or warranty justify the markup. If a new-old-stock PP2822 approaches the price of a current $150-$200 trimmer, comparing current warranty and replacement-part support is especially important.
How Location and Shipping Affect the PP2822 Price
Used equipment prices vary with local supply and seasonal demand. In suburban and rural areas where homeowners maintain larger yards, buyers may find more listings and negotiate in person. In dense urban markets, inventory can be thinner, and convenient local listings may command a premium. A practical comparison is to allow roughly 10%-20% variation between nearby markets, not to assume a universal regional price.
Spring and early summer can bring more demand as yard work starts, while late fall and winter may produce slower sales in colder states. The discount is not guaranteed: storage space, local weather, and the number of competing listings all affect what a seller will accept. Checking listings over a week or two can show whether a price is unusually high for the area.
Shipping is a particularly important cost driver for this product. A long-shaft trimmer is awkward to box, and shipping charges can add $25-$70 or more. Sales tax may also apply to an online purchase, depending on the transaction and state rules. Compare the delivered total rather than the advertised item price.
Local pickup can save a meaningful share of the price while allowing a running test. If buying remotely, ask for the packed dimensions, shipping charge, photographs of the model tag, and a clear description of the return policy before paying.
PP2822 Repair Time Versus Shop Labor Charges
Basic maintenance often takes 15-45 minutes for someone comfortable with small engines. Replacing line, cleaning the exterior, inspecting the filter, or changing a spark plug is usually less involved than diagnosing intermittent stalling. Fuel-system troubleshooting can take longer if old mix, clogged passages, or deteriorated lines are involved.
A shop may charge $60-$120 per hour, plus a diagnostic fee or minimum charge commonly around $30-$75. A straightforward service visit may take 30-60 minutes of billed labor, while difficult starting or an intermittent ignition problem can require more testing. Ask whether the diagnostic charge is credited toward approved repairs.
Parts availability can extend the calendar time even when hands-on labor is short. A shop may need to identify an aftermarket equivalent, order a specific assembly, or determine whether a part is still supported. Before authorizing labor, request an estimate that separates diagnosis, parts, and installation, and ask the shop to contact the owner if the total exceeds the estimate.
For a PP2822 worth $50-$80, a repair quote above about $100 deserves a careful comparison with replacement. The exception is a machine in unusually good condition where the repair addresses one isolated fault and the owner values keeping the existing equipment.
When a Replacement Trimmer Costs Less Than Restoring the PP2822
A new entry-level gas trimmer commonly falls around $100-$180, while midrange models may run $180-$300 or more, depending on engine, shaft, cutting width, and warranty. A battery trimmer can cost roughly $100-$250 for the tool alone; a compatible battery and charger may add $60-$180 if they are not already owned. Those prices are comparison ranges, not direct equivalents to every PP2822 configuration.
Repair is more attractive when the engine has good compression, the shaft and controls are sound, and the fault is limited to inexpensive maintenance. Replacement becomes more compelling if the PP2822 needs both engine work and several accessories, or if the owner cannot confirm that required parts are available.
For occasional trimming around a small yard, a corded or basic battery model may reduce fuel and tune-up costs, though reach, runtime, and battery replacement matter. For longer sessions or thick growth, a gas model may better match the work. A used replacement trimmer can also cost $40-$120, but it carries many of the same condition and warranty risks as the PP2822.
Judge the PP2822 by its complete working cost, not by its original price or brand name. Add purchase, shipping, immediate parts, and likely shop labor, then compare that total with a new or used alternative that has suitable power and usable support.