A Poulan Wild Thing 2375 typically costs about $40-$100 used, with a working, clean saw averaging around $70. Because this gas chainsaw is an older model and is no longer commonly sold new, price depends mostly on operating condition, bar and chain wear, local availability, and whether repairs or parts are needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used working saw | $40 | $70 | $100 | Typical private-sale range |
| Nonrunning saw | $15 | $35 | $60 | Value depends on parts and repair needs |
| Refurbished saw | $90 | $125 | $170 | Ask what was serviced and whether a warranty applies |
| Replacement chain | $12 | $20 | $30 | Price varies by pitch, gauge, and link count |
What a working 16-inch Wild Thing 2375 usually costs
A used Poulan Wild Thing 2375 with a 16-inch bar, a cold-starting engine, and a functional chain brake generally sells for $50-$100. Around $70 is a reasonable midpoint for an ordinary saw that runs, oils the chain, and has no obvious fuel or ignition problem. A tidy example with a sharp chain, sound bar, and recent service can reach $100-$130.
For a standard working saw, budget about $70-$100 before tax or any immediate maintenance. Listings above that range are more defensible when the seller demonstrates a cold start and includes useful accessories or documented repairs. Listings below $40 may reflect a nonrunning engine, missing parts, or a sale that has not tested the saw.
Assumptions: U.S. private-party pricing, 16-inch bar, ordinary wear, and no major engine damage.
How the saw, chain, and repair work shape the quote
A used-saw price can hide near-term expenses. A worn chain, hardened fuel lines, or a damaged bar may turn an inexpensive purchase into a larger repair bill. The table gives typical U.S. shop or retail ranges; actual parts availability can vary because the 2375 is an older model.
| Cost item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Used saw | $40 | $70 | $100 | Running, ordinary condition |
| Chain and sharpening | $12 | $25 | $45 | Replacement chain or shop service |
| Bar replacement | $25 | $45 | $75 | Compatible replacement bar |
| Basic tune-up labor | $40 | $70 | $110 | Inspection, adjustment, and minor service |
| Fuel or ignition repair | $20 | $65 | $150 | Minor line work through larger diagnosis |
Shop labor commonly runs about $60-$110 per hour, and diagnostic or minimum charges may be $25-$60. A quote should identify whether parts, diagnosis, and labor are included; a $60 repair estimate may exclude a separate inspection charge.
Which 2375 specs and condition details change its price?
The Wild Thing 2375 is generally listed as a roughly 38cc gas chainsaw, often equipped with a 16-inch bar. Buyers should verify the actual bar, chain compatibility, and model label rather than assuming a listing includes the original setup. A complete saw with its chain brake, chain tensioning parts, and intact covers is worth more than a partly dismantled unit.
Engine condition creates the largest price difference. A saw that starts cold, idles steadily, accelerates without bogging, and oils the chain supports the upper used range. A seller who demonstrates only a warm start provides less assurance. A bar with deep rail wear or a chain with damaged cutters can reduce value by roughly $15-$40; a nonrunning saw may be worth only $15-$60 as a repair or parts purchase.
Confirm cold starting, chain lubrication, brake action, and bar wear before treating a listing as a ready-to-use saw. Carburetor trouble, low compression, or a damaged crankcase can cost more to address than the saw is worth.
Three realistic 2375 purchase totals at different conditions
These examples show how the purchase price can change after ordinary setup or repair. Shop charges and parts vary by location, and a repair estimate is not proof that the saw will be dependable afterward.
| Buying scenario | Saw price | Added costs | Estimated total |
|---|---|---|---|
| Working saw, usable chain | $65 | $10 for fuel and minor setup | $75 |
| Working saw, worn chain | $70 | $20 chain plus $15 fitting or sharpening | $105 |
| Nonrunner needing diagnosis | $30 | $45 inspection plus $60 minor repair | $135 |
The third scenario assumes a repairable fuel or adjustment issue, not internal engine damage. If a shop identifies compression or crankcase problems, the buyer should compare the revised total with another used saw before authorizing work.
Do local listings change the Wild Thing 2375 price?
Prices depend on local supply more than on a formal new-retail price. In areas with many homeowners selling older outdoor equipment, a running saw may be 10%-15% below the national midpoint. In remote or rural areas with fewer listings, ready-to-use examples can cost 10%-20% more, especially during wood-cutting season.
Online marketplaces may show higher asking prices than completed sales, and shipping can add $20-$50 or more while making inspection difficult. Local pickup lets a buyer test a cold start and avoid freight expense. Taxes, marketplace fees, and shipping are not included in the price ranges above.
When a repair beats buying another used chainsaw
A chain, fuel line, or minor carburetor service can make sense when the saw starts and has adequate compression. Spending $20-$70 on a limited repair may be reasonable for an otherwise complete 2375. If the estimate reaches $100-$150, the total may approach the price of a better-condition used chainsaw or a current entry-level gas model.
Replacement is more practical when the saw has several faults, unavailable parts, a damaged engine, or a safety component that cannot be restored affordably. A replacement purchase may cost more upfront, but it can include current parts support and a manufacturer warranty. A 2375 bought strictly for parts should generally cost less than $60 unless valuable components are confirmed.
How to keep a used 2375 purchase under budget
Ask the seller to start the saw cold and demonstrate idle, throttle response, chain lubrication, and brake engagement. Check that the bar and chain are present and that the chain stops when the brake is engaged. These checks do not replace professional inspection, but they help reveal problems that should lower the offer.
Price the needed chain, bar, and repair before agreeing to a sale. For example, a $45 saw needing a $25 bar and $20 chain already totals $90 before labor. Avoid paying a premium for generic claims such as “recently tuned” without a description or receipt, and compare several local listings rather than relying on the highest asking price.
A sensible target is $50-$80 for a demonstrated, working 2375 and less than $40 for an untested or nonrunning unit. Set a repair ceiling before buying, since labor and scarce parts can erase the savings of a low initial price.