Buying Presidential Shake shingles from CertainTeed involves a price that blends material costs, installation labor, and regional factors. This article presents cost ranges, per-unit pricing, and practical ways to estimate the total project. The price for Presidential Shake shingles depends on roof size, underlayment, ventilation, and added protections like ice and water shielding. Readers will find concrete figures to help budget for a roof replacement or new install.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Shingles (CertainTeed Presidential Shake) | $2.50/sq ft | $4.50/sq ft | $7.50/sq ft | Architectural, cedar-look asphalt products |
| Labor (installation) | $3.50/sq ft | $5.50/sq ft | $8.50/sq ft | Midwest to Southeast; labor intensity varies with attic access |
| Underlayment & accessories | $0.60/sq ft | $1.20/sq ft | $2.00/sq ft | Felt or synthetic; starter strips, fasteners |
| Ventilation & flashing | $0.50/sq ft | $1.00/sq ft | $2.00/sq ft | Ridge vent, step flashing, valley flashing |
| Permits & disposal | $200 | $600 | $1,500 | Depends on local rules and roof size |
| Delivery & haul-away | $150 | $300 | $700 | Material transport and debris removal |
| Total installed price (1,500 sq ft roof) | $9,875 | $15,000 | $25,000 | Assumes standard access, no major repairs |
Assumptions: Midwest labor rates, standard underlayment, normal access, 50-year shingle warranty, no structural remediation.
Presidential Shake Price Per Square Foot Installed
Often buyers see a price per square foot to compare options quickly. Typical installed cost ranges from $6 to $14 per sq ft for Presidential Shake shingles, influenced by regional labor rates and roof complexity. At the low end, basic materials and crews with easy access push costs down; at the high end, complex geometry or premium enabling work drives up the total.
Assumptions: 1,000–2,000 sq ft roof, standard attic access, no special structural work.
Material Group: Shingles, Underlayment, and Accessories
Material costs span $2.50 to $7.50 per sq ft for Presidential Shake shingles, plus $0.60 to $2.00 per sq ft for underlayment and related accessories. The exact mix depends on shingle color, grade, and whether synthetic underlayment is used. Premium starter strips and additional drip edge add modest increments to the bill.
Assumptions: Standard asphalt shingle grade, no hail damage, no premium coloration.
Labor and Installation Time by Roof Size
Labor typically runs $3.50 to $8.50 per sq ft depending on crew efficiency and roof complexity. A 1,500 sq ft roof often takes 2–4 days with two workers under light weather constraints. Larger or steeper roofs can extend the schedule and labor costs.
Assumptions: Weather window available; crew size 2–4; access is straightforward.
Regional Variations: Coastal Versus Inland Pricing
Coastal markets may push total costs higher due to access, permits, and local wage scales with ranges roughly 10–25% above inland benchmarks. Regions with high demand or difficult terrain can see the high end creeping toward the upper price bands.
Assumptions: Typical urban coastal ZIPs, standard permit requirements, no extreme coastal corrosion issues.
Permits, Disposal, and Debris Handling
Permit and disposal costs usually range from $200 to $1,500. Some areas require structural inspections or code corrections that add to the price. Debris haul-away typically sits near $150–$700 depending on local disposal fees and distance.
Assumptions: Local rule set, one standard tear-off cycle, no hazardous waste.
Upgrade Options and System Type Choices
Choosing additional protections increases price per sq ft by roughly $0.50 to $2.00 for upgrades like ice and water shield or higher-grade underlayment. A sealed ridge vent system adds a moderate premium but can reduce future maintenance costs.
Assumptions: 1,500 sq ft roof, no unusual wind loading beyond typical codes.
Strategies to Reduce the Price Without Sacrificing Quality
Control scope and timing to trim costs by scheduling in late fall or early spring, bundling materials with the contractor, or replacing only the roof plane sections that show wear. Compare quotes from two to three local installers and verify warranty terms before committing.
Assumptions: No emergency replacement, standard regional permit timing.
Cost-Component Snapshot: What A Typical Quote Looks Like
Major cost components are Shingles, Labor, and Underlayment, with smaller shares for Permits, Delivery, and Flashing. The table below outlines a representative mix for a 1,500 sq ft job.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Shingles | $3,750 | $6,750 | $11,250 | Presidential Shake shingles |
| Labor | $5,250 | $9,250 | $12,750 | Installation crew hours |
| Underlayment & Accessories | $900 | $1,900 | $3,000 | Starter strips, nails, drip edge |
| Permits & Disposal | $250 | $900 | $1,300 | Regional variations |
| Delivery | $150 | $350 | $600 | Material transport |
Assumptions: 1,500 sq ft, standard attic access, no structural repair required.