Presidential shingles typically cost $700-$1,300 per roofing square installed, with an average near $950 per square. The Presidential shingles price per square depends mainly on shingle model, roof pitch and layout, tear-off needs, and local labor rates; one square covers 100 square feet of roof surface.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed price per square | $700 | $950 | $1,300 | 100 sq ft; standard replacement scope |
| Shingles per square | $350 | $475 | $650 | Product price varies by model and supplier |
| Roofing labor per square | $250 | $350 | $500 | Higher on steep or complex roofs |
| Typical 20-square roof | $14,000 | $19,000 | $26,000 | Before major decking repairs |
Installed Presidential Shingle Prices Per Roofing Square
For a straightforward replacement, homeowners often receive installed quotes of $700-$1,300 per square. A 20-square roof, equal to about 2,000 square feet of roof surface, commonly totals $14,000-$26,000. A simple roof with easy access may fall near the low end; multiple valleys, dormers, steep slopes, or expensive metro-area labor can push the estimate higher.
These designer asphalt shingles are thicker and more dimensional than basic three-tab products, so they generally cost more to purchase and install. Estimates should specify the exact Presidential product, underlayment, flashing work, tear-off, disposal, and warranty terms. Assumptions: standard residential replacement, typical U.S. labor rates, no extensive structural repairs, and roof area measured along the slope.
Budget around $950 per square as a planning average, then adjust for roof access and local quotes.
What Shingle, Labor, and Removal Charges Cover
A roofing quote combines the shingles with installation supplies, labor, and any removal or disposal. The following ranges are per 100 square feet and are general U.S. estimates; line items can overlap when contractors quote a single installed rate.
| Quote component | Typical price per square | What changes the charge |
|---|---|---|
| Presidential shingles | $350-$650 | Product line, color, supplier, and availability |
| Underlayment and starter materials | $45-$110 | Coverage, membrane type, and roof edges |
| Installation labor | $250-$500 | Pitch, roof shape, access, and crew rates |
| Tear-off and disposal | $75-$180 | Number of existing layers and dump fees |
| Flashing and ventilation work | $30-$140 | Chimneys, valleys, vents, and condition |
Decking replacement is usually priced separately, often at about $75-$150 per sheet installed, depending on plywood thickness and local labor. Ask whether the bid includes drip edge, ridge caps, ice-and-water membrane, and cleanup. Comparing itemized scopes helps reveal whether a lower bid leaves out necessary materials or removal.
How Roof Pitch and Layout Shift the Per-Square Quote
Roof area and roof difficulty both affect the final rate. A home with 25 squares of roof surface will generally cost more than one with 15 squares, but the per-square price may also rise when crews need extra setup or safety equipment. Roof pitch, stories, access, and the number of cuts all matter.
For example, slopes above roughly 6:12 may require additional fall protection and slower installation, while pitches near or above 8:12 can add about 10%-25% to labor in some markets. A roof with several dormers, hips, or valleys may require 5%-15% more labor and waste material than a simple gable roof. Measure sloped roof area rather than relying only on the home’s floor area.
Product quantity also depends on waste. A simple roof may need about 10% extra shingles; complex layouts may require 15%-20%. Confirm the contractor’s square count and waste allowance before comparing totals.
Ways to Lower the Presidential Shingle Replacement Bill
Keep the project within budget by separating necessary work from optional upgrades. Request a written scope showing product model, square count, tear-off layers, flashing, ventilation, and decking allowance. Get at least three local bids based on the same specifications, rather than comparing totals with different materials or warranties.
Replacing shingles when weather and scheduling are manageable may help avoid emergency or rush charges. If the roof has one layer and the decking is sound, removal is usually simpler than jobs with multiple layers or extensive repairs. Avoid paying for extra ventilation or upgraded accessories unless the roof inspection identifies a need or local code requires them.
Do not cut costs by omitting required flashing, underlayment, or safe installation practices. Confirm whether the quote includes taxes, permit fees where applicable, cleanup, and a written workmanship warranty.
Regional Labor Rates Change Roofing Square Prices
Prices tend to run higher in dense, high-cost metro areas and regions with strong contractor demand. Compared with a typical local baseline, urban markets may be about 10%-25% higher, while rural areas can be 5%-15% lower when access and travel are uncomplicated. These are directional differences, not fixed regional price rules.
Weather exposure and local building practices can also affect material choices and labor time. Ask contractors who regularly work in the same county for quotes, and check whether their estimates include local permit and disposal charges. Local bids are more useful than applying a national average without adjusting for labor and code requirements.
When Tear-Off, Decking, or Flashing Adds Extra Charges
Removal costs rise when crews find multiple shingle layers, difficult disposal access, or a need to protect landscaping. Replacing deteriorated roof decking can add several hundred dollars or more, depending on the number of sheets; contractors commonly identify damaged areas after tear-off and bill by sheet. Chimney or wall flashing replacement may also be separate from the base installation price.
Permit costs vary by municipality, and some jurisdictions require inspections or code-related upgrades during reroofing. Request a written allowance for concealed damage and ask how the contractor will obtain approval before exceeding it. A clearly stated change-order process limits surprises once the old shingles are removed.
Presidential Shingles Compared With Standard Asphalt Options
Basic architectural shingles often have a lower installed price, commonly around $450-$850 per square, depending on region and scope. Presidential products cost more because they provide a heavier, layered shake-style appearance. Premium composite or synthetic shake roofing can exceed $1,000-$1,800 per square installed, although material, labor, and warranty details vary widely.
Compare expected service life, manufacturer coverage, wind rating, and roof structure requirements alongside the initial price. A cheaper product may make sense for a limited budget, while a premium alternative may have different upkeep or installation needs. Compare complete installed specifications, not just the shingle price per bundle.
Three Roof Sizes Show the Total Price Range
A 15-square, simple gable roof could cost about $10,500-$19,500 installed, with a midpoint near $14,250. A 20-square roof with average access may land around $14,000-$26,000, while a 30-square roof with steep slopes and several valleys could reach $24,000-$39,000. These examples use the ranges above and assume no large-scale deck replacement.
Actual roof-square counts differ from living-area square footage because roof pitch, eaves, and overhangs increase surface area. Use a contractor’s measured roof area and itemized scope to turn these planning estimates into a reliable budget.