Prices for pressure washing services vary by surface, square footage, and labor. This article lists typical cost ranges in USD, along with drivers like material, access, and equipment. Read on to compare low, average, and high estimates and how to budget for a project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| House siding (per sq ft) | $0.15 | $0.35 | $0.60 | Vinyl or wood; DIY-friendly to hire pro |
| Driveway cleaning (per sq ft) | $0.20 | $0.40 | $0.70 | Concrete or pavers; buildup varies |
| Roof cleaning (soft wash, per sq ft) | $0.50 | $0.80 | $1.50 | Lower-pressure, specialty detergents |
| Deck washing (per sq ft) | $0.25 | $0.55 | $1.00 | Wood typically higher than composite |
| Patio or sidewalk cleaning (per sq ft) | $0.20 | $0.40 | $0.75 | Flat surfaces; may include sealant prep |
| Fence washing (per linear ft) | $0.50 | $1.20 | $2.00 | Length and height affect access |
| Garage floor cleaning (per sq ft) | $0.25 | $0.50 | $0.90 | Stains or coatings impact cost |
House Siding Cleaning By Surface Type
Most customers pay within a modest range based on surface material and access. Typical total: small homes with vinyl siding run around $300-$800, while larger homes or wood siding can reach $1,000-$2,000. Per-square-foot pricing helps budget when siding area is known: $0.15-$0.60 per sq ft. Assumptions: Midwest labor rates, standard detergent, normal street access.
| Surface | Low | Average | High | Notes |
|---|---|---|---|---|
| Vinyl siding (2,000 sq ft) | $300 | $600 | $1,200 | Often a single visit |
| Wood siding (2,000 sq ft) | $500 | $1,000 | $2,000 | Extra care required to avoid damage |
| Fiber cement (2,000 sq ft) | $350 | $750 | $1,300 | Better pressure tolerance |
Driveway Cleaning: Concrete vs Pavers
Per-square-foot ranges reflect material and stain level. Concrete driveways commonly cost $0.20-$0.70 per sq ft, with typical total $150-$600 for small driveways and $800-$2,000 for large, stained surfaces. Pavers add complexity and may push average toward the higher end. Older or heavily stained driveways incur extra agitation, seed for moss, and sealant prep. Assumptions: Standard access, asphalt basics excluded.
| Material | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete | $0.20 | $0.40 | $0.70 | Stain removal may add to cost |
| Pavers | $0.25 | $0.50 | $0.90 | Joint cleaning can add time |
Roof Cleaning With Soft Wash Techniques
Soft wash roof cleaning avoids pressure damage. Expect $0.50-$1.50 per sq ft depending on roof pitch, shading, and debris. Typical jobs for average homes fall in the $1,000-$2,500 range, while steep or multi-story roofs can exceed $3,000. Material and pitch are the biggest cost drivers in roof cleaning. Assumptions: Low-rise homes, gentle pitch, standard detergents.
| Roof Type | Low | Average | High | Notes |
|---|---|---|---|---|
| Gable, asphalt | $0.50 | $0.80 | $1.00 | Lower risk; faster rinse |
| Steep or multiple stories | $0.80 | $1.20 | $2.00 | Requires safety gear |
Deck Washing Costs by Material
Wood decks command higher prep and protection costs than composite. Typical ranges are $0.25-$1.00 per sq ft, translating to about $300-$1,200 for a standard 12×20 wood deck. Labor intensity, surface condition, and stain removal play large roles. Higher-grade finishes or loose boards can push totals up. Assumptions: Moderate access, no major rot or repairs required.
| Material | Low | Average | High | Notes |
|---|---|---|---|---|
| Wood | $0.40 | $0.70 | $1.00 | Protection and conditioning may be extra |
| Composite | $0.25 | $0.55 | $0.95 | Lower maintenance but still requires care |
Patio and Sidewalk Cleaning: Scope and Scale
Flatwork cleaning runs $0.20-$0.75 per sq ft. A typical 300 sq ft patio lands around $60-$225, with larger or stained surfaces rising to $500-$900. Expect higher prices for brick or stone textures that trap grime. Stubborn moss and algae increase cost due to longer dwell time and more detergent use. Assumptions: Standard access, no sealing included.
| Surface | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete/patio | $0.20 | $0.40 | $0.75 | May include trash pick-up of debris |
| Brick/stone | $0.25 | $0.60 | $1.10 | Specialty detergents often used |
Fence Washing: Linear Foot Pricing
Fence cleaning ranges from $0.50-$2.00 per linear foot, depending on height, material, and access. A 150-ft wooden fence commonly costs $75-$300, while taller or vinyl fences move toward $450-$900. Access constraints and coating removal needs frequently drive higher pricing. Assumptions: Ground-level fence, no gate removal.
| Fence Type | Low | Average | High | Notes |
|---|---|---|---|---|
| Wood | $0.50 | $1.20 | $2.00 | Discoloration may require extra time |
| Vinyl | $0.75 | $1.50 | $2.50 | Less porous but needs gentle detergents |
Garage Floor Cleaning: Per-Square-Foot Estimate
Garage floor cleaning commonly runs $0.25-$0.90 per sq ft. A typical 400 sq ft garage might cost $100-$360. Heavier stains, oil residues, or epoxy coatings increase the price. Surface condition is a primary driver. Assumptions: Concrete slab, no coating removal.
| Condition | Low | Average | High | Notes |
|---|---|---|---|---|
| Clean concrete | $0.25 | $0.50 | $0.75 | Basic wash |
| Stains/oils | $0.40 | $0.70 | $0.90 | Possible degreaser/additional rinse |
Key Variables That Shift Pressure Washing Quotes
Pricing can swing with roof pitch, surface texture, and accessibility. The strongest drivers include surface material and square footage plus access challenges like gated driveways or multi-story exteriors. For example, a 25% higher price may appear when a job requires scaffolding or safety rope systems. Assumptions: Standard detergent; no permit requirements.
| Variable | Impact | Typical Range | Notes |
|---|---|---|---|
| Surface material | Directly affects cleaning method and risk | Vinyl vs wood or brick | Higher for wood and stone |
| Square footage | Drives base labor and equipment time | 500-2,500 sq ft common | Larger sites scale linearly |
| Access and height | Requires extra crew safety measures | Standard vs multi-story | Steeper roofs raise cost |
| Stains and buildup | Detergent use and dwell time | Light to heavy | Oil, algae, moss escalate price |
Ways to Cut Pressure Washing Costs Without Sacrificing Quality
Smart planning can lower the bill. Consider scheduling in mild seasons to avoid peak demand, bundle multiple surfaces into a single visit, and pre-clean small areas to reduce overall time. Choosing the right material and scope can prevent unnecessary upgrades. Assumptions: Regional pricing variance considered.
| Strategy | Effect on Price | Typical Benefit | Notes |
|---|---|---|---|
| Bundle surfaces | Reduces trips | 10-25% savings | Ask for a multi-area discount |
| Schedule off-peak | Lower labor demand | 5-15% reduction | Midweek slots often cheaper |
| Sealant and repair planning | Avoids rework | Prevents future cleaning costs | Include in initial scope |
| Category | Low Range | Average Range | High Range | Per-Unit Example |
|---|---|---|---|---|
| Labor | $20-$40/hr | $35-$75/hr | $90+/hr | Typical crew of 2 |
| Equipment | $0-$60 | $15-$40 | $120 | Pressure washer rental or service van |
| Detergents | $5-$20 | $15-$40 | $80 | Eco-friendly options vary |
| Permits/fees | $0 | $0-$50 | $200 | Occasional regional rules |