The Price Pfister 28000-0100 price varies by retailer and finish, but buyers typically see a range that covers the component itself and any necessary installation labor. Key cost drivers include finish, supplier stock, and whether a professional installation is used. This article presents current cost estimates, per-unit pricing where relevant, and practical ways to budget for a replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Price Pfister 28000-0100 part | $25 | $40 | $60 | Valve cartridge or handle kit depending on model |
| Finish option upgrade | $0 | $8 | $25 | Brushed nickel or chrome usually standard |
| Replacement kit (gasket, seals) | $5 | $12 | $20 | Often included in complete kit |
| Professional installation labor | $75 | $125 | $200 | Hourly rates or fixed service visit |
| Travel/diagnostic fee | $0 | $40 | $75 | Applied if visiting site |
Market Price Ranges for Price Pfister 28000-0100 Components
Typical total price for a replacement Price Pfister 28000-0100 including labor often falls in the $100-$225 range in common residential settings with standard finishes and straightforward access. For kits that include multiple components or high-end finishes, expect $160-$300 total. Assumptions: Midwest labor rates, standard materials, normal access.
Line-Item Breakdown: Major Cost Components
Pricing is most transparent when broken into four to six cost components. The table below shows common line items and realistic price bands for the 28000-0100 family.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Parts: Price Pfister 28000-0100 | $25 | $40 | $60 | Cartridge or spindle assembly |
| Finish upgrade | $0 | $8 | $25 | Brushed nickel, polished chrome, etc. |
| Gaskets and seals | $5 | $12 | $20 | Includes o-rings and seat washers |
| Labor to install | $75 | $125 | $200 | 1-2 hours typical |
| Travel/diagnostic | $0 | $40 | $75 | Site visit if needed |
| Tax & fees | $0 | $8 | $15 | Depends on locality |
What Drives the Final Quote on a 28000-0100 Replacement
The strongest price variables include access to the faucet under sink and finish choice. For cramped spaces and older homes, labor hours may exceed 1.5 hours, increasing total cost. Another driver is whether the job stays at a cartridge swap or requires valve body inspection. Assumptions: residential bathroom sink faucet, standard cabinet clearance, single-handle configuration.
Labor Time and Crew Size: Realistic Scenarios
Most installations are a 1-2 hour job for a single plumber, with a small crew if additional tasks are bundled. If a service call includes diagnostic work and partial replacement at multiple fixtures, total labor can reach 3-4 hours. Labor rate ranges from $75 to $200 per hour depending on region and contractor.
Regional Price Variation, By City Size
Prices tend to be on the higher side in coastal cities and large metro areas. In suburban markets, expect the average to land in the mid-range. Rural areas may show the low end of the spectrum. Assumptions: regional labor norms; standard lead times; single-faucet replacement.
Per-Unit Pricing: Cartridges vs Complete Kits
When buying just the cartridge (28000-0100), expect $25-$60. If purchasing a full kit with handles, seals, and imagery, total per-unit cost often runs $60-$120 for the package, with labor adding on top. Budget per fixture carefully to avoid surprise charges.
Regional Tax and Handling Fees to Expect
Taxes and handling can add up to 5-8% of the parts and labor. Some retailers waive diagnostic fees with a purchase, others charge a flat service call. Assumptions: standard U.S. sales tax regime; no state-specific rebates applied.
Timing and Seasonality for 28000-0100 Sales
Prices can shift with seasonal promotions. Home improvement retail cycles in spring and early summer often feature discounting on fixtures, while demand spikes during rainy seasons may push service call fees higher. Plan around promotions to save on parts.
Upgrade vs. Repair: When to Consider Alternatives
For older fixtures with multiple leaks or wear, replacement of the entire valve assembly may be more cost-effective than a single cartridge swap. In new installations, a direct cartridge replacement is typically the lowest-cost option if the faucet model is compatible. Assumptions: single-handle Price Pfister 28000-0100 faucet family.
How to Reduce Price Without Sacrificing Quality
Control scope by focusing on the cartridge replacement only, compare four local quotes, and schedule during off-peak hours. Use standard finishes, and confirm warranty terms before purchase. Careful scope management can lower total expenditure.
Warranty, Durability, and Long-Term Costs
Most Price Pfister parts carry a limited warranty of 1-5 years depending on the product line. Consider the long-term cost of potential reseating and future seal replacements when budgeting. Assumptions: standard residential warranty coverage applies.
Quick Price Scenarios for 28000-0100 Accessories
Scenario A: Cartridge only in chrome finish, no diagnostic fee, standard access — total $70-$95. Scenario B: Full kit with brushed nickel and on-site labor — total $150-$230. Scenario C: High-end finish with extended labor due to cramped under-sink space — total $180-$300.