Price Pfister 808 Series replacement parts typically cost $8-$90 per part, with a common repair totaling $25-$150 when labor is included. The final price depends on which component has failed, whether an exact-fit part is still available, and local plumber rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Replacement part | $8 | $30 | $90 | Small seals through specialty components |
| DIY repair total | $15 | $45 | $110 | Part and basic supplies, before tools |
| Plumber repair total | $100 | $225 | $425 | Includes service call and labor |
| Replacement faucet | $90 | $220 | $500 | New faucet and professional installation |
Typical 808 Series part prices and repair totals
Small washers, O-rings, and other seals commonly run $8-$25. A cartridge or other internal control component may cost $20-$60, while a less common handle, spout, or trim piece can reach $40-$90. Exact 808 Series configurations vary, so the faucet model and part number should be confirmed before ordering.
A straightforward do-it-yourself repair often totals $15-$65 with a readily available part. A plumber’s repair is usually $100-$275 when the visit involves diagnosis and a relatively quick replacement; hard-to-find parts or extra work can push the bill above that range. For many 808 Series repairs, the service call costs more than the replacement part.
Assumptions: One faucet repair, standard access, common replacement part, and typical U.S. pricing; specialty or discontinued parts may cost more.
What cartridge, seal, and plumber labor add to the quote
Parts are only one line of the bill. A plumber may charge a minimum service fee even when the repair takes less than an hour, and a corroded fitting or stuck component can add time. Ask whether the quote includes the part, installation, and a return visit if the ordered component does not fit.
| Quote item | Typical price | Pricing basis | What changes it |
|---|---|---|---|
| Cartridge or internal valve part | $20-$60 | Per part | Exact fit and OEM availability |
| O-rings, washers, or seals | $8-$25 | Per repair set | Number and type of seals |
| Handle or trim component | $25-$90 | Per piece | Finish, condition, and supply |
| Plumber labor | $75-$150 | Per hour | Access, corrosion, and minimum charge |
| Service or diagnostic fee | $75-$175 | Per visit | Location and company policy |
Labor is often billed with a one-hour minimum, so a 30-minute repair may still incur a full-hour charge or a separate service fee.
Get an itemized estimate that separates the part, labor, and trip charge.
How model numbers, finishes, and corrosion change part prices
Compatibility is the biggest parts-price variable. “808 Series” alone may not identify the exact faucet revision; a model suffix, handle style, or production change can affect which cartridge or trim fits. Check the model number on the faucet documentation or product label, and compare the removed part with the replacement listing before purchase.
Standard internal parts generally cost less than matching exterior trim. A common cartridge may be $20-$60, while a discontinued handle or finish-specific piece can cost $50-$120 if available through specialty inventory. Mineral buildup or corrosion can also turn a simple cartridge swap into a longer repair, especially when shutoff valves or connections must be addressed.
Confirm the model and part number before paying a premium for a hard-to-find component.
When should an 808 Series faucet be repaired or replaced?
Repair usually makes financial sense when the faucet body is sound and the needed part is available at a reasonable price. A $20-$60 internal part paired with limited labor can keep a functioning faucet in service. Replacement becomes more attractive when multiple components fail, the body leaks, or a matching part costs $75-$120 before labor.
A new basic faucet commonly costs $90-$220, with installation bringing the total to roughly $200-$500 depending on removal, access, and local labor. This is not automatically cheaper than repairing an 808 Series unit, but it gives a useful comparison when a repair quote approaches the cost of a replacement installation.
Compare the complete repair quote with the faucet-and-installation total, not just the replacement part price.
Plumber time and service-call fees for an 808 repair
A simple cartridge or seal replacement may take 30-60 minutes once the correct part is on hand. Diagnosis, removal of a stuck component, or a second trip for an incorrect part can extend the job to 1-2 hours or more. Typical hourly rates run $75-$150, while service-call minimums commonly range from $75-$175.
In higher-cost metro areas, labor and service fees may be 15%-35% above prices in many smaller markets. Rural customers may see longer travel charges or fewer nearby sources for older Pfister parts. Request the trip charge, labor minimum, and any diagnostic fee before scheduling.
Having the model information and clear photos ready can reduce diagnosis time and ordering mistakes.
Where to find compatible Price Pfister 808 parts
Check Pfister’s parts resources, plumbing-supply counters, and established online parts sellers using the complete model number or the old part’s number. Prices for aftermarket-compatible components may be lower, often $10-$40 for common internal parts, while OEM or specialty parts may run $20-$90 or more. Availability and return terms matter because similar-looking cartridges may not interchange.
Before ordering, compare dimensions, stem shape, connection points, and finish when relevant. Ask whether the listing covers one part or a complete kit, and verify shipping and restocking fees. A $25 part can become a poor bargain if it is incompatible and the faucet must be taken apart again.
Buy by verified part number and fit details rather than by series name alone.
Lower the bill by narrowing the repair before ordering
Start by identifying whether the symptom is a drip, loose handle, low flow, or leak around the spout; each can point to different components. Do not order a cartridge until the exact faucet model is confirmed. If a plumber is needed, send photos and ask whether the estimate includes diagnosis, the part, labor, and a possible return visit.
For DIY work, shut off the water and confirm the correct part before disassembly. Avoid replacing the whole faucet solely because a seal is worn, but compare replacement costs when parts are scarce or the faucet body is damaged. If several repairs are needed, bundling them into one service visit can avoid paying multiple trip charges.
Controlling diagnosis and ordering errors is often the most reliable way to keep an older-faucet repair affordable.