Prospective buyers typically pay for a mix of faucet quality, finish, and installation. The price range for a Price Pfister bathroom faucet varies by model, finish, and inclusion of accessories, with installed costs influenced by labor and plumbing compatibility. This article covers cost specifics and practical pricing for U.S. shoppers evaluating a Price Pfister bathroom faucet.
Assumptions: Midwest labor rates, standard 1- or 2-handle faucets, standard 8″ centerset or 4″ centerset configurations, common finish like Chrome or Stainless, typical under-sink supply lines included or available.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Price Pfister faucet price (retail) | $60 | $180 | $500 | Core unit by finish and model |
| Installation labor | $120 | $240 | $400 | Includes removal of old faucet in standard install |
| Valve/rough-in kit (if needed) | $15 | $40 | $100 | May be required for older plumbing |
| Supply lines and connectors | $5 | $20 | $50 | Often bundled with faucet |
| Disposal or cartage fees | $0 | $0 | $20 | Regional variances |
| Finishes upgrade surcharge | $0 | $20 | $60 | Brushed Nickel, Matte Black, etc. |
Direct Price Range for Price Pfister Bathroom Faucets by Type
Typical total installed cost for common Price Pfister bathroom faucet types spans from $180 to $900 depending on model and finish. Assumptions: standard 1- or 2-handle centerset or widespread configurations, standard installation in a single vanity, no extensive repairs.
Major Cost Elements in a Price Pfister Faucet Quote
The quote breaks down into four to six components, with a primary emphasis on the faucet itself, labor, and any required upgrades. Faucet price plus labor usually accounts for most of the total.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Faucet body and finish | $60 | $180 | $500 | Chrome, Satin, Nickel, Bronze |
| Labor for removal and install | $120 | $240 | $400 | Includes shutoff checks |
| Valves/rough-in kit | $15 | $40 | $100 | Needed for older plumbing |
| Supply lines and adapters | $5 | $20 | $50 | New lines improve reliability |
| Permits or inspections | $0 | $0 | $20 | Usually not required for simple replacements |
How Labor and Installation Affect the Final Price
Labor duration and crew size can swing the total by tens to hundreds of dollars. Expect 2–4 hours of labor for straightforward installs on a single vanity. Complex plumbing or wall access increases both time and cost.
How Room Size, Valve Type, and Finish Drive Costs
Different configurations influence pricing. A single-handle center-set faucet tends to be cheaper than a widespread two-handle model. Finishes like Matte Black or Bronze typically add $20–$60 over basic Chrome.
Regional Price Variations for Price Pfister Faucets
Geographic differences can shift installed prices by roughly 10–20% depending on labor markets and material availability. Coastal urban areas often see higher rates than rural regions, while large metropolitan centers may incur premium delivery charges.
Upgrades and Accessories That Change the Price
Upgrades such as motion-sensing features, higher-grade cartridges, or included pop-up drains add costs. Special finish packages and integrated water-saver tech can push the total upward by $30–$150.
Ways to Trim the Price Without Sacrificing Quality
Consider choosing standard finishes, reuse existing supply lines if compatible, and select a mid-range Price Pfister model. Bundling faucet and drain kit often yields modest savings, while scheduling installation during off-peak times can reduce labor surcharges.
Three Realistic Quote Scenarios for Price Pfister Faucets
Scenario A: 8″ widespread chrome faucet, standard install, Midwest region. Total: $180-$360. Includes faucet $80-$150, labor $120-$180, lines $10-$30.
Scenario B: Matte Nickel two-handle centerset with upgrade cartridge, urban area. Total: $320-$520. Faucet $180-$320, labor $120-$220, finish upgrade $20-$60.
Scenario C: Brushed Bronze single-handle with drain included, suburb region. Total: $260-$420. Faucet $120-$260, labor $140-$210, drain/assembly $0-$50.
Per-Unit and Per-Project Cost Examples
For a standard 1-handle Price Pfister faucet in chrome, installed on a single vanity, expect: Price Pfister faucet $60-$180, installation $120-$240, total $180-$420. For a two-handle widespread model in Matte Black with premium finish, total range typically lands at $320-$520.