The cost of Price Pfister bathroom faucets varies by model, finish, and installation scope. Typical price drivers include the faucet style (single-handle vs two-handle), finish durability, cartridge technology, and whether a new set replaces existing hardware. This article outlines the price range, component costs, and practical ways to budget for a Pfister bathroom faucet project, with exact price language you can use in quotes.
Introduction note: Buyers generally pay for the faucet unit, installation labor, valve cartridges, and any required supply lines or mounting hardware. The Price Pfister name influences both price and availability in many U.S. markets.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Price Pfister faucet (single-handle, standard finish) | $60 | $120 | $250 | Basic models or older finishes |
| Price Pfister faucet (double-handle, standard finish) | $80 | $150 | $300 | Traditional style or mid-range finishes |
| Installation labor (plumbing) | $95 | $150 | $250 | Residential bathroom, standard access |
| Valve cartridge replacement | $20 | $40 | $90 | Depends on model and warranty |
| Shipping or delivery (faucet) | $5 | $15 | $40 | Residential curbside or box delivery |
Price Pfister Bathroom Faucet Price Range by Model Type
Basic single-handle faucets typically range from $60 to $140, with most mid-range finishes settling around $90-$120. Higher-end finishes and ceramic cartridges can push prices toward $150-$250. For two-handle setups in a traditional style, expect $80-$180, with premium finishes reaching $200-$300.
Higher-cost Pfister lines or specialty finishes, such as brushed nickel with enhanced corrosion resistance, may exceed $300 per faucet. When paired with a matching vanity set or widespread spread faucet, the total project price increases accordingly.
Major Cost Components in Pfister Faucet Quotes
Parts and finishes contribute the largest share of the faucet price, driven by finish durability and cartridge type. Labor for installation, including shutoff valves and supply lines, is the next major contribution. Add-ons like mounting hardware and quick-connect hoses may add a modest amount per unit.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Faucet unit | $60 | $120 | $300 | Single-handle or two-handle; standard finish |
| Finish and cartridge options | $0 | $20 | $60 | Standard brass cartridge vs premium ceramic |
| Labor | $95 | $150 | $250 | Installation in common bath |
| Supply lines and valves | $5 | $25 | $60 | Flexible lines, shutoffs |
| Shipping | $5 | $15 | $40 | Delivery to home |
| Warranty coverage | $0 | $0 | $0 | Most Pfister products include warranty; extended plans vary by retailer |
Variable Factors That Drive Price Pfister Faucet Quotes
Finish durability and cartridge type have a measurable impact on price. Brushed nickel or polished chrome finishes often cost more than basic chrome, and ceramic disc cartridges can add $20-$60 per faucet. Region and local labor rates also move the total by roughly 10% to 25% depending on market tightness and availability.
Other drivers include the faucet’s system type (center-set vs widespread), number of mounting holes required, and whether a coordinating soap dispenser or matching vanity set is included. A spread faucet’s per-unit cost can be higher due to extra supply lines and mounting hardware.
Regional Pricing Differences for Pfister Bathroom Faucets
Urban markets tend to show higher install labor and accessory costs, often adding $20-$60 to the labor line. Suburban markets are typically closer to averages, while rural areas may see slightly lower labor with longer lead times for stocked finishes.
Overall, expect a regional delta of roughly 5% to 20% when comparing price ranges across major U.S. regions. A mid-range Price Pfister faucet in the Northeast might land around $120-$170, while the same model in the Southeast could be $100-$150 before installation.
Labor and Material Split for Pfister Faucet Quotes
Labor hours for a standard bathroom faucet install are commonly 1.0-2.0 hours in typical homes, with a per-hour rate of $75-$125 depending on locale. Materials, including lines and mounting hardware, usually stay under $50-$80 per faucet in most remodel scenarios.
| Scenario | Labor hours | Labor rate | Materials | Total range | Notes |
|---|---|---|---|---|---|
| Single-handle, standard finish | 1.0-1.5 | $75-$110 | $20-$60 | $95-$180 | Average home with standard supply lines |
| Two-handle, premium finish | 1.5-2.0 | $90-$125 | $40-$80 | $130-$260 | Complex install or limited space |
How Model Type Impacts Price Pfister Bathroom Faucets
Widespread faucet models usually cost more than center-set designs due to additional mounting hardware and longer supply lines. Touchless or high-arc designs can add $30-$100 to the faucet price and install time. In contrast, basic single-handle centerset models are often the most economical option for budget-minded buyers.
For a complete vanity setup, pairing a Pfister faucet with coordinating hardware may raise the total by 10% to 25% compared with a standalone faucet. Finish selections like antique bronze or matte black often command a premium over standard chrome.
Ways to Cut Costs on Price Pfister Bathroom Faucets
Scope control and timing can lock in lower prices. Choosing a standard finish, avoiding specialty coatings, and selecting off-peak purchase windows (when retailers discount surplus inventory) can reduce costs by 5% to 15%. Consolidating multiple bathroom updates into a single order often saves on shipping and labor calls.
Consider replacements over upgrades when existing plumbing is in good condition. If the old valve cartridge is still functioning, replacing only the cartridge may save substantial money vs. installing a new faucet. Getting multiple quotes and asking for itemized bids helps ensure the stated price reflects all required components.
Mini Price Scenarios for Quick Reference
Scenario A: Basic bathroom upgrade in a suburban home with standard single-handle Pfister faucet, chrome finish, center-set design. Estimated total: $110-$170 including installation.
Scenario B: Mid-range makeover in a city apartment with a widespread, two-handle Pfister faucet in brushed nickel, standard cartridge. Estimated total: $170-$280 including labor and parts.
Scenario C: Premium remodel in a high-rise with a touchless, high-arc Pfister faucet in matte black and matching accessories. Estimated total: $240-$420 including installation and hardware.