Replacing a Price Pfister Marielle faucet cartridge typically costs $15-$60 for the part alone or about $140-$300 with a plumber. The final price depends on the faucet’s exact model and cartridge, local labor rates, and whether corrosion or a leak has damaged other parts.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Replacement cartridge | $15 | $30 | $60 | Aftermarket or compatible part through higher-priced OEM stock |
| DIY replacement | $20 | $40 | $85 | Part and basic supplies; assumes no special tools |
| Plumber-installed replacement | $140 | $210 | $300 | Common service-call and labor total for an accessible faucet |
| Corroded or difficult repair | $225 | $325 | $450 | May include added labor, shutoff work, or related parts |
What a Marielle cartridge replacement usually costs
For a typical single-handle Marielle kitchen faucet, a cartridge replacement generally runs $140-$300 when completed by a plumber. A straightforward repair near the low end includes an accessible faucet and a readily available cartridge; higher quotes may reflect a service minimum, an older model, or a stuck cartridge. The cartridge itself is commonly $15-$60, while a do-it-yourself repair often totals $20-$85 with supplies.
Marielle is a faucet family, not one universal cartridge specification. The correct part depends on the faucet model and configuration, so buyers should check the model number or compare the old cartridge before ordering. Assumptions: One faucet, standard residential access, no replacement of the faucet body or supply lines. A plumber’s minimum service charge can make labor cost more than the cartridge.
How cartridge, labor, and service-call charges add up
Quotes vary in what they include. Ask whether the amount covers diagnosis, the part, installation, and testing, and whether a separate trip fee applies. The ranges below reflect common U.S. residential pricing, not a guaranteed quote.
| Quote item | Typical price | What changes it |
|---|---|---|
| Cartridge | $15-$60 per unit | Model match, OEM availability, and seller |
| Labor | $75-$150 per hour | Local rates and time needed |
| Service call or minimum | $75-$175 per visit | Company policy and travel distance |
| Small supplies | $3-$20 per repair | Grease, seals, or fasteners |
| Related parts | $10-$80 per item | Damaged O-rings, handle parts, or shutoff valves |
A simple cartridge swap may take 30-60 minutes, though a service minimum can still apply. Confirm whether the quoted labor is hourly or a flat repair price.
Model number, cartridge fit, and corrosion change the quote
The exact faucet model is the first cost variable: a common, stocked cartridge may cost $15-$35, while a less available or OEM replacement can reach $40-$60 or more. A generic cartridge should not be assumed to fit just because the faucet is labeled Marielle. Confirm the part number against the faucet documentation, manufacturer resources, or the removed part before paying for installation.
Access and condition affect labor. A cartridge that releases normally may take under an hour; mineral buildup or corrosion that adds 1-2 hours can increase labor by roughly $75-$300 at typical hourly rates. A seized handle, damaged retaining nut, or leaking shutoff valve may also require separate parts or work. Ask the plumber to price additional repairs separately before authorizing them.
Keep the repair price down without risking a bad fit
Find the faucet model and verify the cartridge before scheduling service. If the faucet is easy to reach and the shutoff valves work, buying the confirmed part first can avoid an extra sourcing trip, but check the plumber’s policy on customer-supplied parts. A mismatched or defective part can add another visit.
For DIY work, shut off both water supplies, protect the sink drain from dropped hardware, and take photos as parts come off. Avoid forcing a corroded handle or cartridge; damage to the faucet body can turn a modest repair into a replacement. Compare at least two written quotes, including service-call charges and any warranty. Price the complete repair, not just the cartridge.
When a leak points to more than the cartridge
A drip from the spout, a stiff handle, or difficulty controlling water flow can be consistent with a worn cartridge, but symptoms alone do not confirm the cause. Leaks at the base or under the sink may involve seals, connections, or supply lines instead. A diagnostic visit may cost $75-$175, sometimes credited toward approved work.
If the faucet has multiple failing parts, visible corrosion, or a loose body, compare repair pricing with a new faucet installation. A basic replacement faucet may cost $100-$250 for the product, with installation often bringing the total to about $250-$600 depending on access and plumbing changes. Replacement becomes worth comparing when the repair quote approaches the cost of a new faucet installed.
How long the plumber needs for a Marielle faucet
For a reachable faucet with functioning shutoffs, a plumber may spend 30-60 minutes replacing the cartridge and checking for leaks. The appointment can take longer when the cartridge is stuck, the model must be identified on site, or water valves need attention. Many companies charge a minimum visit even when hands-on work is brief.
Scheduling a cartridge repair alongside another plumbing task may reduce the effective service-call expense if the company allows work to be bundled. Request an estimated labor duration and ask whether the diagnostic fee is separate from installation. Time estimates are most useful when the quote also states the service minimum.
Why Marielle repair quotes differ by U.S. location
Labor is generally higher in major metro areas and high-cost coastal markets than in many smaller towns. For the same accessible cartridge repair, a practical local comparison may be 15%-30% above the national-style range in expensive urban markets and 10%-20% below it in lower-cost rural areas. Travel distance and parts availability can narrow or widen that gap.
Use the $140-$300 installed range as a starting point, then compare local quotes with the same scope: cartridge, labor, trip charge, and leak test. A quote above $300 may still be reasonable if the cartridge is scarce or corrosion adds work; it should explain those charges. Matching the scope is more useful than comparing headline prices alone.