A ProVia Heritage steel entry door typically costs about $1,500-$4,000 installed, with the final price shaped by door size, glass, hardware, frame condition, and labor. A basic replacement may cost less, while a larger custom unit or installation involving trim and framing can exceed $5,000.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit | $600 | $1,200 | $2,500 | Single steel door; options affect price |
| Installed replacement | $1,500 | $2,700 | $4,500 | Standard opening and ordinary access |
| Custom or expanded project | $3,000 | $4,500 | $7,000+ | May include sidelites, framing, or trim |
Typical ProVia Heritage door prices by project size
For a standard single entry door, budgeting $1,500-$4,000 installed is a practical starting point. A plain or lightly configured steel unit with a straightforward swap tends toward the lower end; decorative glass, upgraded locks, custom sizing, and finish options raise the quote. A complete frame replacement can also cost more than installing a door into a sound existing frame.
Double-door systems and doors with sidelites commonly land around $3,000-$7,000 or more installed, depending on width and configuration. Assumptions: U.S. contractor pricing, standard single opening, ordinary access, and no major structural repair. For a like-for-like single-door replacement, about $2,700 is a reasonable planning average.
What frame, glass, and labor add to the quote
ProVia dealers and installers price doors by configuration, so the following component ranges are budgeting estimates rather than a manufacturer price list. Some quotes bundle the door, frame, and installation together; ask for itemized charges before comparing bids.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Steel door and frame | $600-$2,500 | Per door unit | Size, finish, panel style |
| Decorative or insulated glass | $150-$900 | Per glass package | Glass design and privacy |
| Installation labor | $400-$1,200 | Per opening | Removal, fit, trim work |
| Hardware and lockset | $100-$600 | Per set | Finish and security grade |
| Removal and disposal | $75-$300 | Per old unit | Door weight and disposal rates |
Labor is often a substantial part of the total, especially when the old frame or surrounding trim needs repair. A rough labor estimate can be checked with ; many straightforward installations take 4-8 hours, while a difficult opening may require more time.
How door size and opening repairs shift the price
Standard single-door openings are generally less expensive than oversized or paired entries because they use common dimensions and require fewer installation adjustments. Moving from a typical 36-by-80-inch door to a custom width or height can add roughly $200-$800 for the unit and fitting, depending on availability and the amount of modification.
Glass choices also matter. A simple glass insert may add about $150-$400, while elaborate decorative or privacy glass can add $500-$900 or more. If installers find rot, water damage, or an out-of-square opening, repairs can add $200-$1,500; rebuilding part of the wall or changing the opening can cost substantially more. Confirm whether the quote includes a new frame, exterior trim, and repair allowances.
Lower the installed price by controlling the replacement scope
Keeping the existing frame can reduce labor and material charges when it is square, dry, and structurally sound. It is not a safe saving if the frame is rotten or prevents a weather-tight fit; ask the installer to inspect it and explain the repair-versus-replacement recommendation in writing.
Choose the glass, finish, and hardware features that matter rather than pricing every available upgrade. Get at least three written quotes using the same door size, glass package, frame scope, and removal terms. Matching specifications makes bid differences easier to compare than choosing the lowest headline price.
How installation hours and crew rates affect the bill
A basic door swap generally takes one installer or a two-person crew about 4-8 hours. Labor rates commonly fall around $75-$150 per hour per installer, though many contractors charge a per-opening installation price rather than billing by the hour. Scheduling a larger crew may shorten the workday but does not necessarily lower the total charge.
Extra time is likely when the opening needs shimming, weatherproofing, trim replacement, or adjustments to the threshold. Ask whether labor includes sealing, hardware installation, haul-away, and cleanup. A quote should distinguish ordinary fitting from repairs billed as extra work.
Which add-ons can push a Heritage door past $4,000
Sidelites, a transom, and double-door configurations increase both the door package and installation complexity. Depending on size and glass, sidelites may add roughly $700-$2,000; a transom may add $400-$1,200. New interior or exterior casing can add $150-$600, while opening repairs may be priced separately.
Permits are not required for every like-for-like door replacement, but local rules can apply when changing the opening or doing structural work. Permit and inspection charges vary, often from $50-$300 for a modest project. Check the scope and local requirements before treating a low quote as all-inclusive.
Regional door installation prices from rural to urban markets
Labor and contractor overhead differ by location. Quotes in high-cost metropolitan areas may be about 10%-25% above a national-style estimate, while some rural markets run 5%-15% lower, although travel distance and limited installer availability can erase that difference. These are broad planning adjustments, not fixed regional rates.
Compare local bids for the same configuration and ask whether sales tax, delivery, disposal, and warranty service are included. A nearby dealer’s written quote is more useful than applying a regional percentage to an unverified online product price.
Heritage steel versus fiberglass replacement door pricing
A comparable installed fiberglass entry door often costs about $2,000-$5,000, with premium glass or custom sizes raising the total. A basic steel replacement may be less expensive, while upgraded Heritage configurations can overlap with fiberglass pricing. The door material alone does not determine the final bill; frame work, glass, hardware, and labor can outweigh the difference.
Repairing a loose lock or replacing weatherstripping may cost about $100-$400 when the door itself remains sound. A warped, damaged, or poorly fitting unit may justify full replacement, particularly if repairs will not correct security or weather sealing. Compare the repair quote with the complete installed replacement price, not just the door-unit price.