A PurePro Advantage boiler replacement commonly costs about $8,000-$14,000 installed, with a typical project near $10,500-$11,500. The final price depends on boiler size, local oil-heating labor rates, venting and piping changes, and whether the job includes removal of an old unit.
PurePro Advantage models are generally oil-fired residential boilers, but model availability and dealer pricing vary. The ranges below are budgeting estimates, not a guaranteed quote for a specific model or location.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Boiler equipment | $3,500 | $4,800 | $6,500 | Unit price varies by capacity and supplier |
| Installed replacement | $8,000 | $10,800 | $14,000 | Standard swap with typical access |
| Installed cost per heating output | $45 | $75 | $110 | Approximate cost per MBH of rated input; not a retail unit price |
| Major venting or piping changes | $500 | $1,500 | $3,500 | Added to a standard replacement when needed |
Assumptions: U.S. residential oil boiler, standard efficiency equipment, existing fuel supply, normal access, and no major asbestos or structural work.
What a PurePro Advantage Boiler Costs Installed
A straightforward replacement in a small or mid-size home may land around $8,000-$10,000. A typical project involving a mid-capacity boiler, new near-boiler piping, controls, and disposal often runs $10,000-$12,000. Larger homes, difficult access, or extensive vent and hydronic work can push the total to $14,000 or more.
Equipment is only part of the bill. A contractor may also include circulator pumps, expansion tank, air separator, controls, fittings, startup, and system testing. For a like-for-like replacement with sound existing piping, a realistic planning budget is about $10,000-$12,000.
Where the boiler replacement quote goes
These ranges show common quote components for a standard oil-boiler replacement; individual bids may group equipment and accessories together. Labor rates and included parts should be checked line by line.
| Quote component | Low | Typical | High | What changes it |
|---|---|---|---|---|
| Boiler and materials | $3,500 | $4,800 | $6,500 | Capacity, controls, fittings, and supplier |
| Labor | $2,000 | $3,200 | $4,800 | Crew hours and piping complexity |
| Equipment and setup | $300 | $700 | $1,300 | Pumps, expansion tank, and control upgrades |
| Removal and disposal | $300 | $600 | $1,000 | Old boiler weight and access |
| Permits and inspection | $100 | $250 | $600 | Local requirements and inspection fees |
Some projects need additional chimney lining, a new oil-burner component, or water-side cleaning. Those items may appear separately rather than in the base labor figure. Ask whether startup, disposal, permits, and system flushing are included before comparing totals.
How BTU capacity and chimney condition change the price
Boiler sizing affects equipment cost and should be based on a heat-loss calculation, not just the size of the old unit. Residential models commonly cover a broad range of output; moving from a roughly 80,000-BTU input unit to one above 150,000 BTU can add several hundred to more than $1,000, depending on model and dealer.
Chimney condition is another major variable. A sound, correctly sized flue may need little work, while an incompatible or deteriorated chimney can require a liner costing about $1,200-$3,500. Converting to direct vent, if the selected boiler and site allow it, may involve additional venting parts and wall work. Confirm the existing flue is suitable for the proposed boiler before accepting an equipment-only comparison.
How many labor hours does an oil-boiler swap take?
A basic replacement often takes a two-person crew about 10-16 hours, usually completed in one or two workdays. At an effective labor rate of $100-$175 per worker-hour, the labor portion can be roughly $2,000-$5,600, though contractors may quote a fixed project price instead.
Extra time is common when the boiler is in a tight basement, old threaded piping must be rebuilt, or the system needs new pumps and controls. A full system drain and refill, air purging, burner setup, and combustion testing are important parts of commissioning. A quote that is far below the local range may exclude startup, system balancing, or required vent work.
Three PurePro boiler replacement budgets by scope
These examples illustrate how scope changes the total, rather than setting a fixed price for every PurePro Advantage model.
| Project | Example scope | Estimated total |
|---|---|---|
| Basic swap | 90,000-BTU input, existing vent usable, 12 crew hours | $8,000-$9,500 |
| Typical replacement | 125,000-BTU input, controls and near-boiler piping, 16 crew hours | $10,000-$12,000 |
| Complex installation | 150,000-BTU input, chimney liner, piping changes, 24 crew hours | $12,500-$16,500 |
Actual output, model number, and included accessories should be listed on the proposal. A contractor may recommend a different capacity after measuring the home’s heat loss. Compare bids using the same boiler capacity and the same list of included work.
PurePro Advantage pricing across U.S. regions
Labor and permit costs can make comparable installations about 10%-25% higher in high-cost Northeast and coastal metro markets than in lower-cost rural or inland markets. Remote locations may also pay more for delivery or service calls. Oil-heating specialists are more common in parts of the Northeast, while other regions may have fewer installers familiar with the equipment.
These are broad differences, not fixed regional surcharges; local competition and access can narrow or widen them. Get at least two local bids that identify the exact model and scope rather than applying a national average to a local job.
Permits and oil-system work that can add charges
Local rules may require a mechanical permit, inspection, or combustion-safety documentation. Budget roughly $100-$600 for permits and inspection in many standard projects, while code corrections can cost more. If the oil line, shutoff, electrical connection, or chimney needs correction, ask for a separate price and explanation.
Tank replacement is usually outside a boiler quote. If the oil tank is leaking, corroded, or not compliant with local rules, replacement can add roughly $1,500-$4,000 or more depending on tank type, location, and disposal. Keep tank work separate in the estimate so boiler pricing remains clear.
Ways to lower the PurePro installation price
Keeping sound piping and controls can avoid unnecessary upgrades, but parts should not be reused if they are unsafe, failing, or incompatible. Provide clear basement access, remove stored items near the boiler, and schedule replacement before a no-heat emergency when possible. Emergency or weekend work may carry a surcharge of several hundred dollars.
Ask contractors to price required work separately from optional upgrades, including chimney lining, zoning changes, and accessories. Compare warranty terms, labor coverage, disposal, and startup—not only the boiler’s listed price. The most dependable savings come from controlling scope while preserving correct sizing, safe venting, and professional commissioning.