A radial arm saw typically costs $150-$600 used, while refurbished machines often run $800-$3,000 and new industrial models can exceed $8,000. Price depends mainly on saw size, condition, motor capacity, included accessories, and whether delivery and setup are needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used homeowner saw | $150 | $350 | $600 | Commonly 10-inch, tested, basic accessories |
| Refurbished or heavy-duty saw | $800 | $1,800 | $3,000 | May include service, stand, or warranty |
| New industrial saw | $2,000 | $5,000 | $10,000+ | Price varies by capacity and configuration |
| Transport and setup | $100 | $300 | $800 | More for heavy machines or difficult access |
What a radial arm saw costs by condition and size
For a typical 10-inch saw in working condition, a practical used-price range is $150-$600. Older home-shop machines may sell for less if they need cleaning or adjustment; a complete, well-maintained saw with its guard, fence, and stand generally commands more.
Refurbished machines commonly cost $800-$3,000, reflecting inspection, replacement parts, and sometimes a limited warranty. New machines are a narrower market, largely focused on industrial equipment, and may cost $2,000-$10,000 or more. For most home-shop buyers, condition and completeness affect value more than the original brand name alone.
Assumptions: U.S. prices, standard 10-inch home-shop capacity for used examples, and ordinary local pickup unless noted.
How motors, blades, and delivery shape the quote
A listing price may not include the parts or services needed to put the saw into safe working order. The table shows common add-on ranges; actual charges depend on the machine and local labor rates.
| Quote item | Materials | Labor | Equipment | Delivery/Disposal | Typical total |
|---|---|---|---|---|---|
| Blade replacement | $25-$100 | $0-$75 | $0-$20 | $0 | $25-$195 |
| Basic inspection and alignment | $0-$40 | $100-$300 | $0-$50 | $0 | $100-$390 |
| Motor repair or replacement | $150-$500 | $150-$450 | $0-$100 | $0-$100 | $300-$1,150 |
| Local machine transport | $0 | $50-$250 | $0-$100 | $100-$500 | $150-$850 |
Transport can be a significant expense because cast-iron saws are heavy and awkward to load. Ask for the price with the stand, blade guard, fence, and any included extensions clearly listed.
Blade diameter, motor power, and wear change used prices
Blade diameter is a useful first comparison: a 10-inch home-shop saw is generally less expensive than a larger-capacity or industrial machine. A motor rated around 1-2 horsepower suits many small-shop examples; higher-capacity equipment, particularly machines above 3 horsepower, can cost substantially more and may need compatible electrical service.
Mechanical condition also matters. A saw with noticeable arm or carriage play, damaged rails, a missing guard, or a motor that runs hot may need repairs worth several hundred dollars. On machines with a cut capacity above roughly 16 inches, verify that the arm and carriage move smoothly across the full travel before comparing the asking price with smaller saws. Missing safety parts or uncertain electrical condition should reduce the offer, not be treated as minor cosmetic issues.
Which used-saw checks can lower the purchase price
Before agreeing on a price, check whether the saw starts, holds its settings, and makes a square cut across its normal travel. Confirm the blade guard, anti-kickback parts, fence, table, and stand are present. A missing fence or damaged table can add material and setup costs even if the motor works.
Use documented repair needs to negotiate rather than assuming every older saw needs a full rebuild. For example, a $350 machine with a $50 blade and simple alignment may remain economical; one needing a $400 motor and $250 in transport may not. Set a maximum all-in budget that includes repairs, delivery, and any required electrical work.
When professional setup adds labor and transport expense
A local pickup may cost nothing beyond fuel if the buyer has a suitable vehicle, helpers, and safe loading equipment. A professional move and setup can run about $150-$800, depending on distance, machine weight, stairs, and whether the saw must be leveled and aligned after delivery.
Alignment or service labor often runs $75-$150 per hour, with a typical basic inspection taking 1-3 hours. Confirm whether the service quote includes testing cuts and checking the fence and blade alignment.
Three realistic radial arm saw purchase totals
These examples show how the advertised price can differ from the ready-to-use cost. Local quotes vary, especially for heavy equipment and discontinued parts.
- Budget pickup: A used 10-inch saw costs $250, a replacement blade costs $40, and local transport costs $75, for a $365 total.
- Serviced home-shop machine: A refurbished 10-inch saw costs $1,200, delivery costs $200, and setup takes 2 hours at $100 per hour, for a $1,600 total.
- Industrial capacity: A new larger machine costs $5,500, freight is $600, and installation costs $500, for a $6,600 total before any electrical upgrades.
Compare complete, ready-to-run totals rather than purchase prices alone.
New industrial saws compared with older used models
A used machine can cost far less upfront, but age, parts availability, and safety condition may create additional expenses. A new industrial saw usually carries a higher initial price and may include current documentation or manufacturer support; the exact warranty and included accessories should be checked in the written quote.
For occasional trim or crosscut work, also compare the total price of a sliding miter saw or track saw setup. Those tools are not direct replacements for every radial arm saw task, but they may meet a narrower cutting need with less setup and fewer transport concerns. Choose by required cut capacity and workload, not by the lowest sticker price.
Where U.S. buyers may see different asking prices
Used prices depend heavily on local supply. In areas with many woodworking shops, auctions, or estate sales, buyers may find more machines to compare; in places with limited listings, freight can erase an apparent bargain. As a planning estimate, allow for regional price differences of about 10%-25% compared with a nearby market, then check actual listings and delivery quotes.
Industrial models can vary even more because configuration, condition, and freight distance are substantial parts of the deal. For a machine that must be shipped, request a delivered quote and confirm loading, unloading, and insurance terms before paying.