A range hood typically costs $150-$2,500 for the unit, with professional installation bringing a standard project to about $400-$3,500. The final range hood cost depends most on hood style, airflow, whether ductwork is already in place, and the complexity of electrical and cabinet work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Hood only | $150 | $700 | $2,500+ | Basic under-cabinet to premium wall-mount models |
| Installed project | $400 | $1,100 | $3,500+ | Higher when ductwork or cabinets need changes |
| Installation labor | $200 | $500 | $1,200 | Existing wiring and vent route keep labor lower |
| New ductwork | $300 | $900 | $2,000+ | Route length, wall or roof access, and finish work affect price |
Installed range hood prices by style and project scope
For a standard replacement using an existing opening and vent, homeowners commonly pay $400-$1,200 installed. A new ducted hood with a short, straightforward vent route often totals $900-$2,500. Custom inserts, professional-grade units, or difficult venting can raise the project to $2,500-$5,000 or more.
Hood-only prices commonly run $150-$500 for basic under-cabinet models, $300-$1,200 for midrange chimney or wall-mount units, and $1,000-$2,500 for premium or insert models. Assumptions: U.S. pricing, standard residential kitchen, typical materials, and no major structural repairs. A like-for-like replacement is usually the least expensive installation scenario.
What ductwork, wiring, and mounting add to the quote
Installation estimates should separate the appliance from the trade work. A contractor may charge a minimum service fee for a small replacement, while a new vent route requires cutting, sealing, and possibly patching or painting. Confirm whether the quote includes an exterior cap, duct transitions, electrical changes, disposal, and finish repairs.
| Quote item | Typical price | What changes the charge |
|---|---|---|
| Hood unit | $150-$2,500+ | Style, width, airflow, controls, and finish |
| Mounting and connection labor | $200-$700 | Replacement versus new installation |
| Duct and exterior vent | $300-$1,500 | Route length, bends, wall or roof exit |
| Electrical work | $100-$500 | Existing outlet, circuit, and access |
| Removal and finish work | $50-$500 | Old-unit disposal and cabinet or drywall repair |
Electricians and installers may charge roughly $75-$150 per hour, though bundled project bids are common. Ask for labor, ducting, electrical work, and finish repairs as separate quote lines.
How hood width, CFM, and vent length change the price
Most residential hoods are 30 or 36 inches wide. Moving from a basic 30-inch unit to a 36-inch model can add $100-$600, especially for a matching chimney or premium finish. A hood is generally selected to match or exceed the cooktop width; larger ranges may call for a wider unit and greater airflow.
Many everyday kitchens use hoods rated around 300-600 CFM, while high-output ranges may need 600-1,200 CFM or more. Higher airflow can increase appliance cost and may trigger make-up air requirements under local rules. A short, direct duct run costs less than a route over 15-20 feet or one with several elbows. Check the range manufacturer’s ventilation requirements before choosing CFM or duct size.
When ducted and ductless hoods have different budgets
A ductless hood usually costs $150-$800 for the unit and about $200-$500 to install when mounting and power are straightforward. It filters air through charcoal and grease filters, then returns it to the room. Replacement filters add recurring expense, often $20-$100 per set depending on model and frequency of use.
A ducted hood commonly costs $250-$1,500 for the unit, with installed totals often reaching $700-$2,500 when a vent already exists. New ductwork can add $300-$2,000 or more. Ducting exhaust outdoors generally removes heat, moisture, and cooking odors more effectively, but the route and construction work make it more expensive. The lower upfront ductless price is most useful when exterior venting is impractical or unavailable.
How long installation takes and what labor covers
A simple replacement often takes 2-4 hours if the new hood fits the existing cabinet space, vent, and electrical connection. A new ducted installation commonly takes 5-10 labor hours, sometimes split between trades. Roof access, masonry, tight attic spaces, or cabinet modifications can extend the schedule and increase charges.
Labor commonly falls around $200-$700 for a straightforward installation and $500-$1,500 when ductwork, wiring, or carpentry is involved. Have the installer verify the mounting height, cabinet dimensions, duct diameter, and electrical setup before ordering the hood.
Why urban labor and roof venting can raise regional quotes
Labor prices vary with local wages, contractor availability, and building conditions. Major metropolitan markets may price a similar installation 10%-25% above a national middle-of-the-market estimate; rural areas can be 5%-15% lower, although travel or limited contractor availability may offset that difference.
Climate and home layout also matter. A roof exit through a finished or difficult-to-access space can cost more than a short sidewall route. Some jurisdictions require permits or inspections for electrical changes, exterior penetrations, or make-up air equipment. Permit charges often run $50-$300, but requirements and fees differ by location. Ask whether permits, inspection coordination, and roof or exterior sealing are included.
Which add-ons are worth pricing before installation
Potential extras include a new exterior cap at $40-$150, duct transitions or longer duct runs at $50-$300 in materials, and cabinet adjustments at $100-$600. Drywall, tile, or paint repair may add $100-$500. A dedicated circuit or significant wiring change can add $200-$800, depending on access and local electrical requirements.
Make-up air equipment may be required when a high-CFM hood exhausts a large volume of air, commonly around 400 CFM or above depending on local code and home conditions. A basic system can add several hundred dollars; more involved equipment and installation may exceed $2,000. Get a written price for code-related work before approving a high-airflow model.
How to lower a range hood quote without sacrificing ventilation
Keeping the existing vent location, duct size, and electrical connection can prevent costly rerouting. Compare hoods with the same width, CFM, noise rating, and control features so a cheaper model is a meaningful comparison rather than an underpowered substitute. If the existing unit works mechanically, replacing a fan motor or switch may cost less than a full replacement; repairs commonly run $100-$400, depending on parts and access.
Request two or three itemized bids and ask contractors to price both a like-for-like replacement and any proposed upgrades separately. Avoid paying for extra capacity or specialty finishes without a clear need, but do not reduce duct size or ignore manufacturer clearances to save money. Preserving a suitable existing vent route is often the most effective way to control the installed price.