A Reddy Heater rated at 115,000 BTU typically costs about $150-$450 used or refurbished, while a comparable new forced-air kerosene heater may run $300-$650. The final price depends on condition, whether the model is still available, fuel compatibility, included accessories, and local demand.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Reddy 115,000 BTU heater | $150 | $275 | $400 | Working unit, condition and included parts vary |
| Refurbished Reddy heater | $250 | $375 | $500 | Price depends on testing and parts replaced |
| New comparable 115,000 BTU heater | $300 | $450 | $650 | Current brand and features affect price |
| Fuel and basic accessories | $20 | $55 | $110 | Fuel, filter, extension cord, or maintenance parts |
Assumptions: U.S. retail or private-sale pricing, a portable forced-air heater, and no major repair or shipping charge.
What a 115,000 BTU Reddy Heater Usually Sells For
Many Reddy heaters in this output class are older portable forced-air models, so the exact model number and condition matter more than a fixed list price. A functioning used unit commonly sells for $150-$400; a tested, cleaned, or refurbished heater can reach $250-$500. New Reddy-branded stock may be difficult to find, and a new comparable heater generally costs $300-$650.
For a typical buyer, budget about $275 for a used unit or $450 for a comparable new heater before fuel and delivery. These heaters are usually priced as a complete portable appliance rather than by the square foot. A seller’s unusually low asking price may reflect a missing fuel cap, dirty filter, unknown startup condition, or local pickup only.
Which Parts of the Heater Quote Add to the Price
Most purchases have little installation expense because the heater is portable, but inspection, replacement parts, and transport can change the total. The table shows common planning ranges; not every item is needed for every heater.
| Cost component | Low | Typical | High |
|---|---|---|---|
| Heater purchase | $150 | $275-$450 | $650 |
| Cleaning or basic service | $40 | $75-$140 | $220 |
| Fuel filter or nozzle parts | $10 | $25-$60 | $100 |
| Fuel for initial use | $20 | $35-$70 | $100 |
| Delivery or freight | $0 | $25-$85 | $175 |
A heater needing service can cost more overall than a tested unit, even when its purchase price is lower. Paid service rates often fall around $75-$125 per hour, with a shop minimum or diagnostic charge possible.
How BTU Output, Fuel Type, and Tank Size Affect Value
The 115,000 BTU rating identifies heat output, not the heater’s condition or operating cost. A unit with a working pump, clean combustion chamber, intact wiring, and reliable ignition is worth more than one sold untested. Confirm the model plate and the fuel types approved for that specific model; kerosene and diesel compatibility should not be assumed across every heater.
Fuel consumption is a recurring expense. Depending on model and settings, a 115,000 BTU forced-air heater can use roughly 0.8-0.9 gallons per hour. At $3.50-$5 per gallon, an eight-hour run could use about $22-$36 of fuel. For frequent use, fuel expense can exceed the purchase-price difference between a bargain unit and a better-tested one.
Tank capacity also affects convenience and value. A tank near 9-10 gallons can support a long work period, but actual runtime depends on consumption and operating conditions. Check the manual or rating label rather than relying on a seller’s estimate.
Used Reddy Units Compared With New 115,000 BTU Heaters
A used Reddy heater can be the lowest-cost choice when it starts reliably and replacement parts are available. A comparable new heater costs more but typically comes with a defined warranty and a known operating condition. Refurbished pricing falls between those options, though warranty coverage and the meaning of “refurbished” vary by seller.
Compare total cost, not just the sticker price. For example, a $175 used heater plus $100 in service and $60 delivery totals $335. A tested $350 unit picked up locally may be the better value. Ask whether the heater was run under load, whether it shuts off correctly, and whether the seller includes the manual or service history.
What a Startup Test and Local Delivery May Add
Portable units generally do not require paid installation. A buyer can often set one up in under an hour, but safe operation requires following the manufacturer’s clearances, ventilation rules, fuel instructions, and electrical requirements. These heaters produce combustion exhaust and are not appropriate for unventilated occupied indoor spaces. Check the manual and local fire-safety requirements before use.
Online shipping can add $25-$175 or more because of package size and distance; local pickup can avoid that charge. A shop inspection or startup test may add $40-$140, especially if cleaning or adjustment is needed. Before paying, request a cold-start demonstration and check for fuel leaks, damaged cords, smoke, unusual noise, and dependable shutdown.
Why Reddy Heater Prices Differ Across U.S. Markets
Used prices depend on local heating demand and the availability of comparable equipment. In colder areas and during fall or winter, demand can push asking prices roughly 10%-25% above off-season levels. In mild regions or during spring and summer, sellers may accept less, especially for older equipment that is difficult to ship.
Rural listings may have fewer choices but lower delivery costs when pickup is nearby. In urban markets, more listings can improve comparison shopping, while freight or seller delivery can raise the total. These are broad market differences, not guaranteed price adjustments; condition and model number remain central.
How to Lower the Reddy Heater Purchase Price
Compare at least three listings using the same criteria: exact model, tested or untested condition, included parts, and pickup or shipping. Ask for the heater to be started from cold rather than accepting a video of an already-running unit. Confirm the seller’s return policy, if any, and price likely maintenance before negotiating.
Saving $50 on an untested heater is not useful if it immediately needs a pump, nozzle, or repair labor. Buying outside peak heating season can improve negotiating room. Avoid paying extra for accessories that are not required for the specific model, but do not skip necessary filters or approved fuel. If repairs approach the price of a tested replacement, compare against a new unit with warranty coverage before committing.
Questions to Ask Before Paying for a 115,000 BTU Model
Ask for the model and serial numbers, the heater’s age if known, and a clear list of included items. Find out which fuel the owner used, whether the unit has been stored with fuel inside, and when its filter and nozzle were last serviced. These details help distinguish normal used-equipment pricing from a unit that needs immediate attention.
Also confirm whether the stated price includes tax, delivery, or a service guarantee. Private-sale prices may not include a return option, while retail or refurbished sellers may charge more but provide limited support. A written total and a verified operating test make competing offers easier to compare.