Redwood fence boards typically cost $4-$12 each, with common 1-by-6-inch, 6-foot boards averaging about $7-$8. Redwood fence boards price depends on board length, grade, thickness, local availability, and whether the quote covers lumber only or a complete fence installation.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 1-by-6-by-6-foot board | $4 | $7.50 | $12 | Per board; grade and finish affect price |
| Board lumber per linear foot | $0.65 | $1.25 | $2 | Approximate board-only cost |
| Redwood fence, installed | $25 | $40 | $65 | Per linear foot for a typical 6-foot fence |
| 100 linear feet of boards | $900 | $1,650 | $2,600 | About 220 boards, before posts and labor |
What a 6-foot Redwood Board Fence Usually Costs
A standard 6-foot privacy fence often uses 1-by-6-inch boards mounted vertically, with roughly 2.2 boards needed per linear foot when installed tightly. At $4-$12 per board, the boards alone work out to about $9-$26 per linear foot, or around $900-$2,600 for 100 feet, including a modest allowance for cuts and waste.
For a typical 100-foot project, budget about $1,500-$1,800 for midgrade boards alone and more for clear-grade lumber. A complete fence commonly runs $2,500-$6,500 installed, depending on posts, rails, gates, removal, and site conditions. Assumptions: 6-foot height, standard 1-by-6 boards, normal access, and no major terrain or code complications.
How Boards, Rails, and Labor Shape the Fence Quote
A board-only price is not the full project estimate. Contractors also account for the fence frame, fasteners, labor, delivery, and disposal. Comparing quotes is easier when each line item specifies board dimensions, grade, and whether staining or removal is included.
| Quote component | Typical price | What changes the charge |
|---|---|---|
| Redwood boards | $9-$26 per linear foot | Board grade, width, length, and spacing |
| Posts and rails | $5-$12 per linear foot | Post material, spacing, and rail count |
| Labor | $10-$25 per linear foot | Fence length, slope, access, and removal |
| Fasteners and finish | $1-$5 per linear foot | Corrosion-resistant screws and stain choice |
| Delivery and disposal | $100-$600 per project | Distance, order size, and old-fence volume |
Crew labor may be quoted by the foot rather than by the hour; hourly rates often fall around $50-$100 per worker before company overhead.
Frame lumber and installation can equal or exceed the cost of the redwood boards. Verify whether the quote includes concrete, gate hardware, demolition, and hauling so a low board price does not disguise a larger project total.
Board Length, Grade, and Width Change the Price
Board size is a direct price driver: a 1-by-6-by-8-foot board generally costs more than a 6-foot board because it uses more lumber, while a 1-by-8 board covers more fence width but costs more per piece. Check the actual finished thickness and width; nominal lumber dimensions are not the same as the board’s measured size.
Common construction or knotty grades tend to cost about $4-$8 for a 6-foot board. Select or clearer grades can reach $8-$15 or more, particularly for straighter, more uniform boards. Prices can also rise when boards are kiln-dried, surfaced on all sides, or sold in small quantities.
For a 100-foot fence, changing from $5 boards to $10 boards can add roughly $1,100 before waste. With about 220 boards, even a $1 difference per board changes the lumber bill by approximately $220. Allow 5%-10% extra for cuts, defects, and future matching repairs.
Installation Hours and Site Access Affect Redwood Labor
A straightforward 100-foot run may take a small crew about 2-4 working days, depending on post setting, ground conditions, and gate work. Removing an old fence or working around roots, retaining walls, tight side yards, or steep slopes can add hours and equipment charges. Rocky soil may require specialized digging or more concrete.
Ask the installer to price demolition, post holes, and gate installation separately. A labor quote that identifies crew size and expected duration is easier to compare than a single unexplained installation fee.
Regional Redwood Prices Vary With Supply and Delivery
Redwood is generally easier to source in California and nearby western markets. In regions farther from mills and distributors, delivery and limited stock can push board or installed-fence prices about 10%-30% above a comparable West Coast quote. Local wages and contractor availability also affect installation rates.
Prices can differ even within one metro area. A large lumberyard order may qualify for delivery pricing, while a small replacement order may carry a minimum fee. Compare the delivered price per board, not just the shelf tag.
Three Redwood Fence Quotes for Different Project Sizes
| Project | Board estimate | Labor and other work | Approximate total |
|---|---|---|---|
| 50 feet, 6-foot fence, knotty boards | 110 boards at $5-$8; $550-$880 | $900-$1,500 | $1,450-$2,380 |
| 100 feet, 6-foot fence, midgrade boards | 220 boards at $6-$10; $1,320-$2,200 | $1,700-$3,000 | $3,020-$5,200 |
| 100 feet, 6-foot fence, clear-grade boards | 220 boards at $9-$15; $1,980-$3,300 | $1,900-$3,400 | $3,880-$6,700 |
These examples assume normal access and include basic framing and installation, but not major old-fence removal, unusual gates, staining, or difficult excavation. Board counts allow for modest waste, and contractor totals vary by location.
Use the board count and grade as the first check when comparing bids. If one 100-foot quote assumes 220 boards and another assumes fewer, ask whether spacing, board width, or fence length differs.
Lower the Redwood Board Bill Without Sacrificing Coverage
Choose a practical grade for the fence’s purpose: knotty boards usually cost less and can suit a backyard privacy fence, while clear boards are often chosen for a more uniform appearance. Keep the design and board width consistent, and avoid paying for extra finishing or premium lumber where those upgrades are not needed.
Measure the run before ordering and confirm the number of gates, corners, and end cuts. Buying enough material in one order can reduce repeat delivery charges, but avoid overbuying without checking the supplier’s return policy. Get at least three itemized quotes using the same board size, grade, fence height, and removal scope.
For a short damaged area, replacing individual boards may be cheaper than rebuilding an entire run. Match the existing dimensions and account for fading: new redwood may look different from weathered boards until it ages or receives a compatible finish.
Removal, Stain, and Gate Add-Ons to Price Separately
Old-fence removal and disposal can add about $3-$8 per linear foot, though heavy or difficult-to-access material may cost more. Staining or sealing commonly adds roughly $1-$4 per square foot of fence surface, depending on preparation and product. A basic gate may add $150-$500, while larger or more detailed gates can exceed that range.
Confirm whether a quote includes permits or inspections. Requirements differ by city and may depend on fence height, location, and property lines; permit charges can range from $0 to several hundred dollars. Separating optional work from required work shows which upgrades can be deferred.