A redwood fence typically costs $35-$75 per linear foot installed, with many standard 6-foot privacy projects landing near $55 per foot. Redwood fence cost depends most on fence length and height, lumber grade, terrain, gate count, removal needs, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed redwood fence | $35 per linear ft | $55 per linear ft | $75 per linear ft | Standard 6-foot fence, ordinary access |
| 150-linear-foot project | $5,250 | $8,250 | $11,250 | Before unusual site work or multiple gates |
| Redwood materials only | $15 per linear ft | $25 per linear ft | $38 per linear ft | Boards, posts, rails, and basic fasteners |
| Single walk gate | $250 | $500 | $1,000 | Installed; size and hardware affect price |
| Old fence removal | $3 per linear ft | $6 per linear ft | $12 per linear ft | Higher when concrete or disposal is difficult |
What a 6-Foot Redwood Fence Costs Per Linear Foot
For a straightforward 6-foot redwood privacy fence, budget $35-$75 per linear foot installed. A practical midpoint is about $55 per foot, or roughly $8,250 for 150 linear feet. That estimate assumes a conventional board design, standard-grade redwood, pressure-treated posts or suitable redwood posts, typical fasteners, and no major grading.
For quick budgeting, multiply the measured fence run by about $55 per linear foot, then add gates, demolition, and site work. A 100-foot run at that midpoint is about $5,500; 200 feet is about $11,000. These are planning totals, not fixed national quotes: local labor and the chosen lumber grade can shift the final price substantially.
Lower quotes near $35 per foot may reflect a basic layout, lower-cost boards, easy access, or a lower-wage market. Quotes near $75 per foot can be reasonable for higher-grade redwood, tighter board spacing, more substantial posts, difficult digging, or a high-cost metro area. Confirm whether the quote includes posts, concrete, rails, fasteners, cleanup, and taxes.
Assumptions: 6-foot fence, ordinary residential access, standard board layout, no major slope or retaining-wall work.
How Posts, Redwood Boards, and Labor Shape the Quote
A contractor’s estimate usually combines lumber, installation labor, equipment or delivery, and any permit or disposal charges. Material cost depends on the number and dimensions of boards, the post spacing, and whether the design uses horizontal rails, a cap, trim, or a finished face on both sides.
| Quote component | Typical price | What changes the amount | 150-foot example |
|---|---|---|---|
| Redwood boards, posts, rails | $15-$38 per linear ft | Grade, board width, height, spacing | $2,250-$5,700 |
| Labor | $12-$30 per linear ft | Digging, slope, access, crew efficiency | $1,800-$4,500 |
| Fasteners and concrete | $2-$6 per linear ft | Post count, hardware type, soil conditions | $300-$900 |
| Delivery and equipment | $150-$600 per job | Distance, load size, tool or auger rental | $150-$600 |
| Permits and disposal | $0-$1,200 per job | Local rules and old-fence removal | $0-$1,200 |
These ranges overlap because contractors may bundle materials, labor, and overhead into a per-foot price. For a labor-only quote, the basic calculation is A crew of two working 20-30 hours at a combined $90-$160 per crew hour would imply about $1,800-$4,800 in labor.
Ask for a written breakdown that separates fence construction from demolition and optional upgrades. A low per-foot bid may omit delivery, old-post removal, gates, or haul-away charges that appear later as add-ons.
How Height, Grade, and Layout Change Redwood Pricing
Fence height is a major cost driver because taller fences require longer boards and posts, more material, and often additional labor. A 4-foot redwood fence commonly runs $25-$55 per linear foot installed, while an 8-foot fence may reach $50-$100 per foot where local rules allow it. The upper range reflects heavier construction and possible permit or engineering requirements.
Lumber grade also matters. Common-grade boards can cost less but may show more knots, color variation, or imperfections. Clear or higher-grade redwood can add roughly $8-$20 or more per linear foot to the installed price, depending on board availability and the design. Ask whether the estimate specifies grade and whether the visible face, both faces, or only selected boards receive premium lumber.
Layout and site conditions affect labor. A straight run with open access and firm, diggable soil is usually less expensive than a fence with multiple corners, narrow access, tree roots, rock, or a steep slope. A slope greater than about 10% may require stepped panels, custom cuts, or more layout time. Post spacing around 6-8 feet is common; closer spacing increases post and concrete quantities.
Measure the total fence run, planned height, corners, and gate openings before comparing per-foot estimates. A 150-foot straight run is not equivalent to 150 feet split across many short segments and corners.
How to Lower a Redwood Fence Estimate Without Weakening It
The most direct savings usually come from keeping the fence line simple and setting a clear scope before requesting bids. Aligning runs, limiting unnecessary corners, and choosing a standard height can reduce cutting time and material waste. If privacy requirements permit, a wider board gap or a less elaborate top detail may lower lumber use without changing the basic fence structure.
Compare lumber grades by asking contractors to price the same grade and board dimensions. Choosing a lower grade for hidden or less visible sections can be an option, but confirm that the boards still suit the intended exposure and appearance. Avoid reducing post size, embedment, or structural hardware just to reach a lower price; those choices can affect stability and service life.
Do preparation work only when the contractor agrees it will reduce the bid. Clearing loose branches or moving stored items may help access, but utility marking, property-line confirmation, and safe excavation should not be skipped. Combine demolition with installation only if the combined price is lower than separate work, and check whether the old fence includes concrete footings that cost extra to remove.
Get at least three quotes based on the same length, height, board grade, post spacing, gate count, and removal scope. This makes differences in labor rate and material markup easier to identify than comparing total prices alone.
What Do 100-, 150-, and 200-Foot Redwood Fences Cost?
The following examples use installed pricing for typical 6-foot residential designs. They assume standard access and no major grading; gates and removal are listed separately because they vary by property. A lower total may use common-grade boards and a simple layout, while the upper example allows for better lumber or moderate site difficulty.
| Fence run | Low estimate | Average estimate | High estimate | Basis |
|---|---|---|---|---|
| 100 linear ft | $3,500 | $5,500 | $7,500 | $35-$75 per ft |
| 150 linear ft | $5,250 | $8,250 | $11,250 | $35-$75 per ft |
| 200 linear ft | $7,000 | $11,000 | $15,000 | $35-$75 per ft |
For a more detailed example, a 150-foot project at $55 per foot starts near $8,250. Add one basic walk gate at $250-$1,000 and old-fence removal at $450-$1,800, and the working budget becomes about $8,950-$11,050. A second gate, steep terrain, or premium boards can push the total above that range.
Use the average column as a starting point, then adjust for gates, height, lumber grade, and demolition. A calculator that accepts only fence length can give a useful baseline, but it cannot replace a site-specific quote.
When Redwood Installation Labor and Removal Raise the Bill
A typical 100-150-foot residential fence may take a two-person crew about 2-4 working days, depending on post-hole conditions, layout complexity, and whether concrete needs time to set before rails and boards are attached. Labor often represents roughly 25%-45% of a full installation quote. Local contractor rates commonly work out to about $45-$80 per worker hour, though bids are frequently presented per linear foot.
Removal can add $3-$12 per linear foot. A 150-foot old fence could therefore add $450-$1,800 before any exceptional disposal fees. Removing concrete footings, cutting around mature roots, or carrying debris through a narrow passage can raise the charge. Confirm whether disposal is included and whether the quoted removal covers only panels or posts and concrete as well.
Delivery and access also affect the invoice. A lumber delivery may add $100-$400 or more, while a small project can face a minimum mobilization charge of roughly $250-$600. Difficult access that requires hand-carrying materials can add labor even if the fence length is modest.
Request separate prices for installation, demolition, haul-away, delivery, and difficult digging. That breakdown helps explain why two contractors can quote different totals for the same linear footage.
Redwood Versus Cedar and Pressure-Treated Pine Pricing
Redwood is often priced above pressure-treated pine but can be comparable to cedar, depending on lumber grade and regional supply. Installed 6-foot fence prices commonly fall around $35-$75 per linear foot for redwood, $30-$65 for cedar, and $25-$55 for pressure-treated pine. These are broad ranges for basic privacy construction; premium grades and elaborate designs can exceed them.
| Fence material | Installed price per linear ft | 150-foot midpoint | Price trade-off |
|---|---|---|---|
| Pressure-treated pine | $25-$55 | $6,000 | Lower entry cost; appearance and upkeep vary |
| Cedar | $30-$65 | $7,125 | Often close in price; regional availability matters |
| Redwood | $35-$75 | $8,250 | Higher material cost in many markets; natural color and grain |
Midpoints use $40, $47.50, and $55 per foot respectively. Material prices vary by region, and local supply can reverse the expected order. A fair comparison includes the same fence height, board spacing, post type, hardware, and finish scope.
Compare the installed specification, not just the species name. Redwood boards paired with inexpensive posts or minimal rails may not match a cedar quote that includes heavier framing and a finished cap.
How Redwood Fence Prices Shift Across U.S. Regions
Redwood is harvested primarily in the West, so material availability and freight can make western projects less expensive than otherwise similar jobs in distant markets. In California and nearby states, a standard installation may fall near $35-$70 per linear foot. In the Mountain West and parts of the Southwest, expect roughly $40-$80 per foot; the range reflects freight, contractor availability, and local labor.
In the Midwest and Southeast, redwood installations may run about $45-$85 per foot when lumber must travel farther or contractors have limited access to that species. Northeast metro areas can reach $50-$95 per foot because of higher labor, delivery, and disposal costs. These regional differences are approximate, not fixed price rules; a local supplier’s stock and the project’s access can matter more than the state average.
Compared with a typical western quote, a distant market may price 10%-25% higher for similar redwood construction. Urban areas can also carry a 10%-20% labor premium over nearby rural markets, while rural locations may incur extra travel or mobilization charges.
Use local bids as the final pricing benchmark and ask whether the lumber is locally stocked or special-ordered. Freight, lead time, and minimum delivery quantities can change a redwood quote even when the fence design is unchanged.